A novel 6-axis hybrid additive-subtractive manufacturing process: Design and case studies

[1]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[2]  Mohsen A. Jafari,et al.  Development of tube actuators with helical electrodes using fused deposition of ceramics , 2000, ISAF 2000. Proceedings of the 2000 12th IEEE International Symposium on Applications of Ferroelectrics (IEEE Cat. No.00CH37076).

[3]  Jack G. Zhou,et al.  PARAMETRIC PROCESS OPTIMIZATION TO IMPROVE THE ACCURACY OF RAPID PROTOTYPED STEREOLITHOGRAPHY PARTS , 2000 .

[4]  J. Jeng,et al.  Mold fabrication and modification using hybrid processes of selective laser cladding and milling , 2001 .

[5]  Bo-Sung Shin,et al.  Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology , 2001 .

[6]  N. Venkata Reddy,et al.  Improvement of surface finish by staircase machining in fused deposition modeling , 2003 .

[7]  Guilan Wang,et al.  Research of rapid and direct thick coatings deposition by hybrid plasma-laser , 2006 .

[8]  Antonio Armillotta,et al.  Assessment of surface quality on textured FDM prototypes , 2006 .

[9]  Frank W. Liou,et al.  Applications of a hybrid manufacturing process for fabrication of metallic structures , 2007 .

[10]  Wang Guilan,et al.  Hybrid plasma deposition and milling for an aeroengine double helix integral impeller made of superalloy , 2010 .

[11]  K. P. Karunakaran,et al.  Low cost integration of additive and subtractive processes for hybrid layered manufacturing , 2010 .

[12]  Manfred Walter,et al.  Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .

[13]  D. I. Wimpenny,et al.  Remanufacture of turbine blades by laser cladding, machining and in-process scanning in a single machine , 2012 .

[14]  Yong Chen,et al.  Development of a Low-cost Parallel Kinematic Machine for Multi-directional Additive Manufacturing , 2013 .

[15]  Neri Oxman,et al.  Compound fabrication: A multi-functional robotic platform for digital design and fabrication , 2013 .

[16]  Aydin Nassehi,et al.  A review of hybrid manufacturing processes – state of the art and future perspectives , 2013, Int. J. Comput. Integr. Manuf..

[17]  Jean-Yves Hascoët,et al.  A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process , 2014 .

[18]  Ching-chih Wei,et al.  Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining , 2014 .

[19]  Haeseong Jee,et al.  Slicing algorithms for multi-axis 3-D metal printing of overhangs , 2015 .

[20]  D. Gu,et al.  Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder , 2015 .

[21]  Vimal Dhokia,et al.  Process planning for additive and subtractive manufacturing technologies , 2015 .

[22]  Xuan Song,et al.  Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing , 2015 .

[23]  D. Wimpenny,et al.  A REVIEW OF HYBRID MANUFACTURING , 2015 .

[24]  Guillaume Mandil,et al.  Using additive and subtractive manufacturing technologies in a new remanufacturing strategy to produce new parts from End-of-Life parts , 2015 .

[25]  Michael Rieger,et al.  Analysis and Development of the Fused Layer Manufacturing Process using Industrial Robots , 2016 .

[26]  Pierre M. Larochelle,et al.  Robot Arm Platform for Additive Manufacturing Using Multi-Plane Toolpaths , 2016 .

[27]  Vimal Dhokia,et al.  Hybrid additive and subtractive machine tools – Research and industrial developments , 2016 .

[29]  Radovan Kovacevic,et al.  Process planning for 8-axis robotized laser-based direct metal deposition system , 2017 .

[30]  Lin Li,et al.  Study of the relationship between dimensional performance and manufacturing cost in fused deposition modeling , 2018 .