A Quadruple-Hydrogen-Bonded Supramolecular Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries.

With extremely high specific capacity, silicon has attracted enormous interest as a promising anode material for next-generation lithium-ion batteries. However, silicon suffers from a large volume variation during charge/discharge cycles, which leads to the pulverization of the silicon and subsequent separation from the conductive additives, eventually resulting in rapid capacity fading and poor cycle life. Here, it is shown that the utilization of a self-healable supramolecular polymer, which is facilely synthesized by copolymerization of tert-butyl acrylate and an ureido-pyrimidinone monomer followed by hydrolysis, can greatly reduce the side effects caused by the volume variation of silicon particles. The obtained polymer is demonstrated to have an excellent self-healing ability due to its quadruple-hydrogen-bonding dynamic interaction. An electrode using this self-healing supramolecular polymer as binder exhibits an initial discharge capacity as high as 4194 mAh g-1 and a Coulombic efficiency of 86.4%, and maintains a high capacity of 2638 mAh g-1 after 110 cycles, revealing significant improvement of the electrochemical performance in comparison with that of Si anodes using conventional binders. The supramolecular binder can be further applicable for silicon/carbon anodes and therefore this supramolecular strategy may increase the choice of amendable binders to improve the cycle life and energy density of high-capacity Li-ion batteries.

[1]  Qiang Ru,et al.  Mass-producible method for preparation of a carbon-coated graphite@plasma nano-silicon@carbon composite with enhanced performance as lithium ion battery anode , 2017 .

[2]  T. Thundat,et al.  Core cross-linked double hydrophilic block copolymer micelles based on multiple hydrogen-bonding interactions , 2017 .

[3]  Lynden A. Archer,et al.  A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles , 2015, Nature Communications.

[4]  Erhan Deniz,et al.  Dynamic Cross-Linking of Polymeric Binders Based on Host-Guest Interactions for Silicon Anodes in Lithium Ion Batteries. , 2015, ACS nano.

[5]  Thomas M. Higgins,et al.  A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes. , 2016, ACS nano.

[6]  Joanna Aizenberg,et al.  Extremely Stretchable and Fast Self‐Healing Hydrogels , 2016, Advanced materials.

[7]  Yan Jin,et al.  Challenges and Recent Progress in the Development of Si Anodes for Lithium‐Ion Battery , 2017 .

[8]  J. Rogers,et al.  Arrays of sealed silicon nanotubes as anodes for lithium ion batteries. , 2010, Nano letters.

[9]  Taek-Soo Kim,et al.  Millipede-inspired structural design principle for high performance polysaccharide binders in silicon anodes , 2015 .

[10]  Shaojun Guo,et al.  Recent Progress in the Design of Advanced Cathode Materials and Battery Models for High‐Performance Lithium‐X (X = O2, S, Se, Te, I2, Br2) Batteries , 2017, Advanced materials.

[11]  Hyun-Wook Lee,et al.  A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes. , 2014, Nature nanotechnology.

[12]  E. W. Meijer,et al.  Cooperative End-to-End and Lateral Hydrogen-Bonding Motifs in Supramolecular Thermoplastic Elastomers , 2006 .

[13]  Zhenan Bao,et al.  High‐Areal‐Capacity Silicon Electrodes with Low‐Cost Silicon Particles Based on Spatial Control of Self‐Healing Binder , 2015 .

[14]  Xinhong Zhou,et al.  Safety‐Reinforced Poly(Propylene Carbonate)‐Based All‐Solid‐State Polymer Electrolyte for Ambient‐Temperature Solid Polymer Lithium Batteries , 2015 .

[15]  E. W. Meijer,et al.  Depolymerizable, adaptive supramolecular polymer nanoparticles and networks , 2014 .

[16]  J. Choi,et al.  Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries , 2017, Science.

[17]  Hongbo Zeng,et al.  Octadecyltrichlorosilane Deposition on Mica Surfaces: Insights into the Interface Interaction Mechanism. , 2017, The journal of physical chemistry. B.

[18]  Yang Jin,et al.  Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.9% , 2017 .

[19]  Xingyi Zhou,et al.  Material and Structural Design of Novel Binder Systems for High-Energy, High-Power Lithium-Ion Batteries. , 2017, Accounts of chemical research.

[20]  Yu Tian,et al.  Adhesion and Detachment Mechanisms between Polymer and Solid Substrate Surfaces: Using Polystyrene–Mica as a Model System , 2016 .

[21]  Jiulin Wang,et al.  Natural karaya gum as an excellent binder for silicon-based anodes in high-performance lithium-ion batteries , 2017 .

[22]  Ya‐Xia Yin,et al.  A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes. , 2018, Angewandte Chemie.

[23]  E. Kramer,et al.  Adhesion and Surface Interactions of a Self‐Healing Polymer with Multiple Hydrogen‐Bonding Groups , 2014 .

[24]  Jaephil Cho,et al.  A highly cross-linked polymeric binder for high-performance silicon negative electrodes in lithium ion batteries. , 2012, Angewandte Chemie.

[25]  Yongwon Lee,et al.  Recent Progress on Polymeric Binders for Silicon Anodes in Lithium-Ion Batteries , 2015 .

[26]  V. Battaglia,et al.  Conductive Polymer Binder for High-Tap-Density Nanosilicon Material for Lithium-Ion Battery Negative Electrode Application. , 2015, Nano letters.

[27]  Dongdong Chen,et al.  Self‐Healing Materials for Next‐Generation Energy Harvesting and Storage Devices , 2017 .

[28]  Zhenan Bao,et al.  Self-healing chemistry enables the stable operation of silicon microparticle anodes for high-energy lithium-ion batteries. , 2013, Nature chemistry.

[29]  Jie Liu,et al.  A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries , 2015 .

[30]  G. Cui,et al.  Poly(ethyl α-cyanoacrylate)-Based Artificial Solid Electrolyte Interphase Layer for Enhanced Interface Stability of Li Metal Anodes , 2017 .

[31]  Qiang Ru,et al.  Milled flake graphite/plasma nano-silicon@carbon composite with void sandwich structure for high performance as lithium ion battery anode at high temperature , 2018 .

[32]  Kang Xu,et al.  Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries , 2018 .

[33]  E. W. Meijer,et al.  Tough stimuli-responsive supramolecular hydrogels with hydrogen-bonding network junctions. , 2014, Journal of the American Chemical Society.

[34]  Guangzhao Zhang,et al.  Dynamic Supramolecular Hydrogels: Regulating Hydrogel Properties through Self-Complementary Quadruple Hydrogen Bonds and Thermo-Switch. , 2017, ACS macro letters.

[35]  Cheng Wang,et al.  Side-chain conducting and phase-separated polymeric binders for high-performance silicon anodes in lithium-ion batteries. , 2015, Journal of the American Chemical Society.

[36]  Kunfeng Chen,et al.  Microwave-Irradiation-Assisted Combustion toward Modified Graphite as Lithium Ion Battery Anode. , 2018, ACS applied materials & interfaces.

[37]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[38]  Myung-Hyun Ryou,et al.  Mussel‐Inspired Adhesive Binders for High‐Performance Silicon Nanoparticle Anodes in Lithium‐Ion Batteries , 2013, Advanced materials.

[39]  Guangzhao Zhang,et al.  Self-Healing Gelatin Hydrogels Cross-Linked by Combining Multiple Hydrogen Bonding and Ionic Coordination. , 2017, Macromolecular rapid communications.

[40]  Hongbo Zeng,et al.  Adhesion and Friction of Polystyrene Surfaces around Tg , 2006 .

[41]  J. Israelachvili,et al.  Recent advances in the surface forces apparatus (SFA) technique , 2010 .

[42]  U. Neugebauer,et al.  Co-Registered Molecular Logic Gate with a CO-Releasing Molecule Triggered by Light and Peroxide. , 2017, Journal of the American Chemical Society.

[43]  M. Winter,et al.  A Mechanically Robust and Highly Ion‐Conductive Polymer‐Blend Coating for High‐Power and Long‐Life Lithium‐Ion Battery Anodes , 2015, Advanced materials.

[44]  Zhenan Bao,et al.  Lithium Metal Anodes with an Adaptive "Solid-Liquid" Interfacial Protective Layer. , 2017, Journal of the American Chemical Society.

[45]  Xing-long Wu,et al.  A Practicable Li/Na‐Ion Hybrid Full Battery Assembled by a High‐Voltage Cathode and Commercial Graphite Anode: Superior Energy Storage Performance and Working Mechanism , 2018 .

[46]  E. W. Meijer,et al.  Quadruple hydrogen bonded systems. , 2003, Chemical communications.

[47]  Jacob N. Israelachvili,et al.  Thin film studies using multiple-beam interferometry , 1973 .