In-depth modeling of gas oil hydrotreating: From feedstock reconstruction to reactor stability analysis

Abstract The increasing world demand for clean fuels requires improving existing hydrotreating (HDT) technologies through comprehensive studies of these complex reactive systems. This work presents an exhaustive modeling approach of diesel cut hydrotreating which ranges from the chemical characterization of gas oil feeds, over the HDT kinetic modeling and the thermal stability analysis of the reactor. In this approach, a “statistical reconstruction” method was developed to represent the composition by chemical family and by carbon number of different gas oils starting from a set of global analyses. A kinetic model based on a Langmuir–Hinshelwood representation was developed to determine the most adequate operating conditions to attain on-road diesel specifications, including sulfur levels as low as 10 wt ppm. Finally, since hydrotreating reactions are highly exothermic, the thermal stability analysis of a HDT reactor is also presented. This analysis consists of determining a priori whether the reactive system is thermally stable and therefore predicting if runaway will occur. For the latter, a complete dynamic model of the reactor was developed and used to assess the thermal runaway analysis by the perturbations theory.

[1]  Guy B. Marin,et al.  Molecular reconstruction of naphtha steam cracking feedstocks based on commercial indices , 2007, Comput. Chem. Eng..

[2]  M. Lemaire,et al.  Comparative inhibiting effect of polycondensed aromatics and nitrogen compounds on the hydrodesulfurization of alkyldibenzothiophenes , 2002 .

[3]  Claude Moreau,et al.  Factors affecting the hydrogenation of substituted benzenes and phenols over a sulfided NiOMoO3γ-Al2O3 catalyst , 1988 .

[4]  J. Bonnard,et al.  New Developments in Mass Spectrometry for Group-Type Analysis of Petroleum Cuts (First Part) , 1999 .

[5]  J. Jose,et al.  Specific Nitrogen Boiling Point Profiles of Vacuum Gasoils , 2005 .

[6]  A. Sapre,et al.  Hydrogenation of aromatic hydrocarbons catalyzed by sulfided cobalt oxide-molybdenum oxide/.alpha.-aluminum oxide. Reactivities and reaction networks , 1981 .

[7]  David T. Allen,et al.  Structural models for catalytic cracking. 2. Reactions of simulated oil mixtures , 1989 .

[8]  D. Thiébaut,et al.  Comparison of comprehensive two-dimensional gas chromatography coupled with sulfur-chemiluminescence detector to standard methods for speciation of sulfur-containing compounds in middle distillates. , 2006, Journal of chromatographic science.

[9]  F. Massoth,et al.  Hydrodenitrogenation Activities of Methyl-Substituted Indoles , 2000 .

[10]  David T. Allen,et al.  Structural models for catalytic cracking. 1. Model compound reactions , 1989 .

[11]  Massimo Morbidelli,et al.  On parametric sensitivity and runaway criteria of pseudohomogeneous tubular reactors , 1985 .

[12]  Gilbert F. Froment,et al.  Kinetic Modeling and Reactor Simulation in Hydrodesulfurization of Oil Fractions , 1994 .

[13]  F. Cavani,et al.  Chemical and Physical Characterization of Alumina-Supported Chromia-Based Catalysts and Their Activity in Dehydrogenation of Isobutane , 1996 .

[14]  Stephen B. Jaffe,et al.  Building useful models of complex reaction systems in petroleum refining , 1996 .

[15]  M. Hennion,et al.  New benchmark for basic and neutral nitrogen compounds speciation in middle distillates using comprehensive two-dimensional gas chromatography. , 2007, Journal of Chromatography A.

[16]  D. Luss,et al.  Model prediction of hot spots formation in shallow adiabatic packed‐bed reactors , 2006 .

[17]  Laurent Duval,et al.  Characterisation of middle-distillates by comprehensive two-dimensional gas chromatography (GC x GC): A powerful alternative for performing various standard analysis of middle-distillates. , 2005, Journal of chromatography. A.

[18]  Massimo Morbidelli,et al.  Parametric sensitivity of a CSTR , 1986 .

[19]  Matthew Neurock,et al.  Molecular representation of complex hydrocarbon feedstocks through efficient characterization and stochastic algorithms , 1994 .

[20]  A. Dalai,et al.  Comparison of Hydrodenitrogenation of Model Basic and Nonbasic Nitrogen Species in a Trickle Bed Reactor Using Commercial NiMo/Al2O3 Catalyst , 2003 .

[21]  D. Luss,et al.  Reactor diameter impact on hot zone dynamics in an adiabatic packed bed reactor , 2007 .

[22]  Georgina C. Laredo,et al.  Inhibition effects of nitrogen compounds on the hydrodesulfurization of dibenzothiophene: Part 2 , 2001 .

[23]  Damien Hudebine.  Reconstruction moléculaire de coupes pétrolières , 2003 .

[24]  Massimo Morbidelli,et al.  Parametric sensitivity in fixed‐bed reactors: Inter‐ and intraparticle resistance , 1987 .

[25]  Massimo Morbidelli,et al.  Parametric sensitivity in tubular reactors with co-current external cooling , 1990 .

[26]  A. Sapre,et al.  Hydrodesulfurization of methyl-substituted dibenzothiophenes catalyzed by Co-Mo/gamma-Al2O3 , 1980 .

[27]  R. J. Quann,et al.  Structure-oriented lumping: describing the chemistry of complex hydrocarbon mixtures , 1992 .

[28]  K. Knudsen,et al.  Organic nitrogen compounds in gas oil blends, their hydrotreated products and the importance to hydrotreatment , 2001 .

[29]  Damien Hudebine,et al.  Molecular reconstruction of LCO gasoils from overall petroleum analyses , 2004 .

[30]  V. Balakotaiah,et al.  Determination of the critical residence time for the stability of uniform down-flow in a packed-bed reactor , 1997 .

[31]  Massimo Morbidelli,et al.  Parametric sensitivity in fixed-bed catalytic reactors: the role of interparticle transfer resistances , 1986 .

[32]  Massimo Morbidelli,et al.  A generalized criterion for parametric sensitivity: application to a pseudohomogeneous tubular reactor with consecutive or parallel reactions , 1989 .

[33]  M. Nagai,et al.  Hydrodenitrogenation of a mixture of basic and non-basic polynuclear aromatic nitrogen compounds , 1988 .

[34]  D. Luss,et al.  Dynamics of hot zones on top of packed-bed reactors , 2004 .

[35]  V. Balakotaiah,et al.  Runaway limits for homogeneous and catalytic reactors , 1995 .

[36]  D. Luss,et al.  Moving Transversal Hot Zones in Adiabatic, Shallow Packed-Bed Reactors , 2006 .

[37]  D. D. Perlmutter.  Stability of chemical reactors , 1972 .

[38]  Rainer Reimert,et al.  Trickle‐bed reactor model for desulfurization and dearomatization of diesel , 2002 .

[39]  T. Ho,et al.  Poisoning effect of ethylcarbazole on hydrodesulfurization of 4,6-diethyldibenzothiophene , 2004 .

[40]  Fernanda Strozzi,et al.  A new method for assessing the thermal stability of semibatch processes based on Lyapunov exponents , 1996 .

[41]  Gilbert F. Froment,et al.  Hydrodesulfurization of 4-Methyldibenzothiophene and 4,6-Dimethyldibenzothiophene on a CoMo/Al2O3 Catalyst: Reaction Network and Kinetics , 1998 .

[42]  Dan Luss,et al.  Explicit runaway criterion for catalytic reactors with transport limitations , 1991 .

[43]  M. Grenier-loustalot,et al.  Analysis of aromatic sulfur compounds in gas oils using GC with sulfur chemiluminescence detection and high-resolution MS. , 2002, Analytical chemistry.

[44]  Gilbert F. Froment,et al.  Modeling in the development of hydrotreatment processes , 2004 .

[45]  H. Yang,et al.  HDS kinetics study of dibenzothiophenic compounds in LCO , 2004 .

[47]  M. Hennion,et al.  Towards comprehensive hydrocarbons analysis of middle distillates by LC-GCxGC. , 2007, Journal of chromatographic science.

[48]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[49]  D. Beer,et al.  Development of deep hydrodesulfurization catalysts I. CoMo and NiMo catalysts tested with (substituted) dibenzothiophene , 1999 .