MIM capacitor integration for mixed-signal/RF applications

The relentless drive toward high-speed and high-density silicon-based integrated circuits (ICs) has necessitated significant advances in processing technology. The entrance of copper metallization in IC manufacturing has resulted in new challenges in metal-insulator-metal (MIM) capacitor fabrication, one of the key building blocks in analog/mixed signal/RFCMOS circuits. The requirement to reduce passive chip space has led to active researches for MIM with high dielectric constant (/spl kappa/) film. This paper provides an overview of MIM capacitor integration issues with the transition from AlCu backend of line (BEOL) to Cu BEOL. The key to MIM capacitor electrical properties can be achieved with optimized dielectrics. The different MIM capacitor architectures published are also described. Special emphasis is made on the properties of various MIM with high-/spl kappa/ dielectrics in the last section.

[1]  P. Gray,et al.  All-MOS charge redistribution analog-to-digital conversion techniques. I , 1975, IEEE Journal of Solid-State Circuits.

[2]  J. Hobdell.  Optimization of Interdigital Capacitors , 1979 .

[3]  J. McCreary.  Matching properties, and voltage and temperature dependence of MOS capacitors , 1981 .

[4]  F. Habraken,et al.  Characterization of Plasma Silicon Nitride Layers , 1983 .

[5]  J. Paterson,et al.  Polycide/metal capacitors for high precision A/D converters , 1988, Technical Digest., International Electron Devices Meeting.

[6]  T. Iida,et al.  Precise capacitor structure suitable for submicron mixed analog/digital ASICs , 1990, IEEE Proceedings of the Custom Integrated Circuits Conference.

[7]  B. El-Kareh,et al.  Design of precision capacitors for analog applications , 1992, 1992 Proceedings 42nd Electronic Components & Technology Conference.

[8]  T. Nishida,et al.  0.3-/spl mu/m mixed analog/digital CMOS technology for low-voltage operation , 1994 .

[9]  M. J. Williams,et al.  Fourier transform infrared study of rapid thermal annealing of a-Si:N:H(D) films prepared by remote plasma-enhanced chemical vapor deposition , 1995 .

[10]  R. Fleming,et al.  Advanced dielectrics for gate oxide, DRAM and RF capacitors , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[11]  H. Samavati,et al.  Fractal capacitors , 1998, 1998 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, ISSCC. First Edition (Cat. No.98CH36156).

[12]  B. Flietner,et al.  'System on a chip' technology platform for 0.18 /spl mu/m digital, mixed signal and eDRAM applications , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).

[13]  S. Dang,et al.  Optimization of bimodal nitrogen concentration profiles in silicon oxynitrides , 1999 .

[14]  A novel cross-coupled inter-poly-oxide capacitor for mixed-mode CMOS processes , 1999 .

[15]  High density metal insulator metal capacitors using PECVD nitride for mixed signal and RF circuits , 1999, Proceedings of the IEEE 1999 International Interconnect Technology Conference (Cat. No.99EX247).

[16]  B. Pivac,et al.  Nitrogen influence on dangling-bond configuration in silicon-rich SiOx:N,H thin films , 1999 .

[17]  T.H. Lee,et al.  CMOS RF integrated circuits at 5 GHz and beyond , 2000, Proceedings of the IEEE.

[18]  W. Lai,et al.  Single mask metal-insulator-metal (MIM) capacitor with copper damascene metallization for sub-0.18 /spl mu/m mixed mode signal and system-on-a-chip (SoC) applications , 2000, Proceedings of the IEEE 2000 International Interconnect Technology Conference (Cat. No.00EX407).

[19]  K. Stein,et al.  A high reliability metal insulator metal capacitor for 0.18 /spl mu/m copper technology , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[20]  M. Raymond,et al.  Integration of thin film MIM capacitors and resistors into copper metallization based RF-CMOS and Bi-CMOS technologies , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[21]  M. Liang,et al.  A full Cu damascene metallization process for sub-0.18 /spl mu/m RF CMOS SoC high Q inductor and MIM capacitor application at 2.4 GHz and 5.3 GHz , 2001, Proceedings of the IEEE 2001 International Interconnect Technology Conference (Cat. No.01EX461).

[22]  A. Hajimiri,et al.  Capacity limits and matching properties of lateral flux integrated capacitors , 2001, Proceedings of the IEEE 2001 Custom Integrated Circuits Conference (Cat. No.01CH37169).

[23]  R. Mahnkopf.  Advanced CMOS 'system on a chip' technology platforms-status today and outlook tomorrow , 2001, 2001 6th International Conference on Solid-State and Integrated Circuit Technology. Proceedings (Cat. No.01EX443).

[24]  S. Blonkowski,et al.  Investigation and modeling of the electrical properties of metal–oxide–metal structures formed from chemical vapor deposited Ta2O5 films , 2001 .

[25]  J. Babcock,et al.  Analog characteristics of metal-insulator-metal capacitors using PECVD nitride dielectrics , 2001, IEEE Electron Device Letters.

[26]  A. Murthy,et al.  Integration of Mixed-Signal Elements into a High-Performance Digital CMOS Process 31 Integration of Mixed-Signal Elements into a High-Performance Digital CMOS Process , 2002 .

[27]  Ming-Fu Li,et al.  A high performance MIM capacitor using HfO2 dielectrics , 2002, IEEE Electron Device Letters.

[28]  Ali Hajimiri,et al.  Capacity limits and matching properties of integrated capacitors , 2002, IEEE J. Solid State Circuits.

[29]  D. Hisamoto,et al.  High-capacitance Cu/Ta2O5/Cu MIM structure for SoC applications featuring a single-mask add-on process , 2002, Digest. International Electron Devices Meeting,.

[30]  K. Chew,et al.  Characterization and comparison of two metal-insulator-metal capacitor schemes in 0.13 /spl mu/m copper dual damascene metallization process for mixed-mode and RF applications , 2002, Digest. International Electron Devices Meeting,.

[31]  S. Chu,et al.  Effect of the nitrous oxide plasma treatment on the MIM capacitor , 2002, IEEE Electron Device Letters.

[32]  S. Decoutere,et al.  Investigation of PECVD dielectrics for nondispersive metal-insulator-metal capacitors , 2002, IEEE Electron Device Letters.

[33]  A. Chin,et al.  High-density MIM capacitors using Al 2 O 3 and AlTiO x dielectrics , 2002 .

[34]  A. Murthy,et al.  A 90 nm communication technology featuring SiGe HBT transistors, RF CMOS, precision R-L-C RF elements and 1 /spl mu/m2 6-T SRAM cell , 2002, Digest. International Electron Devices Meeting,.

[35]  W. Walter,et al.  Thermal and dielectric breakdown for metal insulator metal capacitors (MIMCAP) with tantalum pentoxide dielectric , 2002, IEEE International Integrated Reliability Workshop Final Report, 2002..

[36]  C. Tsai,et al.  Characterization and comparison of high-k metal-insulator-metal (MiM) capacitors in 0.13 /spl mu/m Cu BEOL for mixed-mode and RF applications , 2003, 2003 Symposium on VLSI Technology. Digest of Technical Papers (IEEE Cat. No.03CH37407).

[37]  R. Ramprasad,et al.  Leakage behavior and reliability assessment of tantalum oxide dielectric MIM capacitors , 2003, 2003 IEEE International Reliability Physics Symposium Proceedings, 2003. 41st Annual..

[38]  MIM Capacitors Using Atomic-Layer-Deposited High- HfO Al O Dielectrics , 2003 .

[39]  High performance ALD HfO/sub 2/-Al/sub 2/O/sub 3/ laminate MIM capacitors for RF and mixed signal IC applications , 2003, IEEE International Electron Devices Meeting 2003.

[40]  A. Chin,et al.  A high-density MIM capacitor (13 fF/μm/sup 2/) using ALD HfO2 dielectrics , 2003, IEEE Electron Device Letters.

[41]  D. Kwong,et al.  HfO2 and Lanthanide-doped HfO2 MIM Capacitors for RF/Mixed IC Applications , 2003 .

[42]  J. Sun,et al.  A 90 nm CMOS MS/RF based foundry SOC technology comprising superb 185 GHz f/sub T/ RFMOS and versatile, high-Q passive components for cost/performance optimization , 2003, IEEE International Electron Devices Meeting 2003.

[43]  Liang-Hung Lu,et al.  3-dimensional vertical parallel plate capacitors in an SOI CMOS technology for integrated RF circuits , 2003, 2003 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.03CH37408).

[44]  K. Chew,et al.  Characterization and comparison of PECVD silicon nitride and silicon oxynitride dielectric for MIM capacitors , 2003, IEEE Electron Device Letters.

[45]  Jeong-Hoon Ahm,et al.  Integration of MIM capacitors with low-k/Cu process for 90 nm analog circuit applications , 2003, Proceedings of the IEEE 2003 International Interconnect Technology Conference (Cat. No.03TH8695).

[46]  Ho-Kyu Kang,et al.  High quality high-k MIM capacitor by Ta/sub 2/O/sub 5//HfO/sub 2//Ta/sub 2/O/sub 5/ multi-layered dielectric and NH/sub 3/ plasma interface treatments for mixed-signal/RF applications , 2004, Digest of Technical Papers. 2004 Symposium on VLSI Technology, 2004..

[47]  S. Chu,et al.  Characterization and comparison of single and stacked MIMC in copper interconnect Process for mixed-mode and RF applications , 2004, IEEE Electron Device Letters.