论文信息 - Miniaturised frequency selective surface based on 2.5-dimensional closed loop

Miniaturised frequency selective surface based on 2.5-dimensional closed loop

A novel frequency selective surface (FSS) has been designed based on 2.5-dimensional (2.5D) closed loop for miniaturisation. Compared with the previous FSSs in the literature, the proposed FSS is smaller (0.048λ 0 × 0.048λ 0) and shows almost the same transmission coefficient for different polarisations and incident angles. A prototype of the proposed FSS has been fabricated and measured. The results of the experiment show a consistency with the simulated ones.

[1] Xi-Lang Zhou,et al. A Miniaturized Dual-Band Frequency Selective Surface (FSS) With Closed Loop and Its Complementary Pattern , 2009, IEEE Antennas and Wireless Propagation Letters.

[2] K. Sarabandi,et al. A Frequency Selective Surface With Miniaturized Elements , 2007, IEEE Transactions on Antennas and Propagation.

[3] I. Lee,et al. 3D frequency selective surface for stable angle of incidence , 2014 .

[4] Benito Sanz-Izquierdo,et al. 3D printing technique for fabrication of frequency selective structures for built environment , 2013 .

[5] Cheng-Nan Chiu,et al. A Novel Miniaturized-Element Frequency Selective Surface Having a Stable Resonance , 2009, IEEE Antennas and Wireless Propagation Letters.

[6] Qun Wu,et al. A Novel Stable Miniaturized Frequency Selective Surface , 2010, IEEE Antennas and Wireless Propagation Letters.

[7] Tzong-Lin Wu,et al. A Novel 2.5-Dimensional Ultraminiaturized-Element Frequency Selective Surface , 2014, IEEE Transactions on Antennas and Propagation.