A Study of Elastic Coupling to the Wind Turbine Blade by Combined Analytical and Finite Element Beam Model

Elastic coupling is a feature specific to fiber-reinforced plastic materials, and it is often used in structures to improve stabilities or for other purposes. In the investigation of the elastic coupling properties, the commonly used finite element analysis (FEA) software package in structures does not usually provide a theoretical understanding. Thus, this study adopted a combined analytical and finite element beam model to address this problem. The model can provide better understanding on structures, and the computation time is far less than the FEA. This study examined several factors that may influence the couplings of wind turbine blades, such as material selection, coupling positions, and the wind force distribution. The results showed that mixed-use of carbon and glass fibers can provide better coupling properties, and the blade developers should arrange the off-axis fibers to adapt to the operating conditions in order to reach better performance.

[1]  Inderjit Chopra,et al.  Structural behavior of two-cell composite rotor blades with elastic couplings , 1991 .

[2]  Paul S. Veers,et al.  AEROELASTIC BEHAVIOR OF TWIST-COUPLED HAWT BLADES , 1998 .

[3]  Huei-Jeng Lin,et al.  Combined Analytical and Finite Element Beam Model for Wind Turbine Blades , 2010 .

[4]  Peretz P. Friedmann,et al.  Optimum design of rotor blades for vibration reduction in forward flight , 1984 .

[5]  James E. Locke,et al.  Design Studies for Twist-Coupled Wind Turbine Blades , 2003 .

[6]  Kyle K. Wetzel.  Utility scale twist-flap coupled blade design , 2005 .

[7]  Sung Nam Jung,et al.  Structural Behavior of Thin- and Thick-Walled Composite Blades with Multicell Sections , 2002 .

[8]  Inderjit Chopra,et al.  Refined Structural Model for Thin- and Thick-Walled Composite Rotor Blades , 2002 .

[9]  Hiroyuki Shiomi,et al.  Strength Formula for Tapered Beam‐Columns , 1984 .

[10]  S. Rajasekaran,et al.  STABILITY AND VIBRATION ANALYSIS OF NON-PRISMATIC THIN-WALLED COMPOSITE SPATIAL MEMBERS OF GENERIC SECTION , 2005 .

[11]  Alireza Maheri,et al.  Combined analytical/FEA-based coupled aero structure simulation of a wind turbine with bend–twist adaptive blades , 2007 .

[12]  M. J. L. van Tooren,et al.  Implementation of bending-torsion coupling in the design of a wind-turbine rotor-blade , 1999 .

[13]  Inderjit Chopra,et al.  Assessment of Composite Rotor Blade Modeling Techniques , 1999 .

[14]  Gunjit Bir,et al.  The Use of Twist-Coupled Blades to Enhance the Performance of Horizontal Axis Wind Turbines , 2001 .

[15]  Amde M. Wolde‐Tinsae,et al.  Critical Load and Postbuckling of Arch Frameworks , 1988 .

[16]  Cheng-Huat Ong,et al.  Design, Manufacture and Testing of A Bend-Twist D-Spar , 1999 .

[17]  Sung Nam Jung,et al.  Theory of thin-walled composite beams with single and double-cell sections , 2007 .

[18]  S. M. Habali,et al.  Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics: Part II: Manufacturing of the blade and rotor , 2000 .

[19]  R. H. Blackwell,et al.  Blade Design for Reduced Helicopter Vibration , 1983 .

[20]  Inderjit Chopra,et al.  Structural response of composite beams and blades with elastic couplings , 1992 .

[21]  Dewey H. Hodges,et al.  Single- and Multicelled Composite Thin-Walled Beams , 2002 .

[22]  Alireza Maheri,et al.  Application of combined analytical/FEA coupled aero-structure simulation in design of wind turbine adaptive blades , 2007 .