Numerical prediction of crack propagation and crack widths in concrete structures

The paper deals with the numerical prediction of crack propagation and crack widths in concrete structures. The early stages of cracking, characterized by distributed micro-cracking, are described by a smeared crack model with rotating crack directions, whereas the subsequent formation of a macro-crack is described by embedding a discontinuity in the displacement field of the respective finite elements. This so-called crack model with delayed embedded discontinuities allows correcting initial mispredictions of the crack direction during crack evolution. It accounts for crack opening in the direction normal to the crack and for relative tangential displacements of the crack faces with transfer of shear forces across the crack faces. After validation of the model by a well-known test series on combined normal and shear loading of concrete specimens, it is applied to two problems of practical relevance in engineering practice. The first one deals with the load-carrying behavior of steel anchors embedded into concrete and the second with the structural behavior of pre-damaged concrete slabs strengthened by different types of concrete overlays.

[1]  J. C. Walraven,et al.  Theory and Experiments on the Mechanical Behaviour of Cracks in Plain and Reinforced Concrete Subjected to Shear Loading , 1981 .

[2]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[3]  T. Belytschko,et al.  Arbitrary branched and intersecting cracks with the eXtended Finite Element Method , 2000 .

[4]  Jörn Mosler,et al.  3D modelling of strong discontinuities in elastoplastic solids: fixed and rotating localization formulations , 2003 .

[5]  J. Oliver.  A consistent characteristic length for smeared cracking models , 1989 .

[6]  L. J. Sluys,et al.  A new method for modelling cohesive cracks using finite elements , 2001 .

[7]  Akshay Venkatesh,et al.  Implementation of curvilinear geometry into p-version HT plate elements , 1989 .

[8]  T. Belytschko,et al.  Extended finite element method for three-dimensional crack modelling , 2000 .

[9]  G. Hofstetter,et al.  An embedded strong discontinuity model for cracking of plain concrete , 2006 .

[10]  D. Borst,et al.  A plasticity model and algorithm for mode-I cracking in concrete , 1995 .

[11]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS , 1996 .

[12]  A. Ingraffea,et al.  Numerical modeling of discrete crack propagation in reinforced and plain concrete , 1985 .

[13]  Giorgio Monti,et al.  IV European Conference on Computational Mechanics , 2010 .

[14]  Milan Jirásek,et al.  Embedded crack model. Part II: combination with smeared cracks , 2001 .

[15]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[16]  Esteban Samaniego,et al.  A study on nite elements for capturing strong discontinuities , 2020 .

[17]  M. Hassanzadeh.  Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements , 1992 .

[18]  Bernhard Günter Trunk.  Einfluss der Bauteilgrösse auf die Bruchenergie von Beton , 1999 .

[19]  Milan Jirásek,et al.  Comparative study on finite elements with embedded discontinuities , 2000 .

[20]  Milan Jirásek,et al.  Embedded crack model: I. Basic formulation , 2001 .

[21]  Esteban Samaniego Alvarado,et al.  Contributions to the continuum modelling of strong discontinuities in two-dimensional solids , 2003 .

[22]  David A. Cendón,et al.  A discrete crack approach to normal/shear cracking of concrete , 2002 .

[23]  B. Winkler,et al.  Application of a constitutive model for concrete to the analysis of a precast segmental tunnel lining , 2004 .

[24]  A. Huespe,et al.  A comparative study on finite elements for capturing strong discontinuities: E-FEM vs X-FEM , 2006 .

[25]  Zenon Mróz,et al.  Finite element analysis of deformation of strain‐softening materials , 1981 .