Improving corrosion resistance of BFRP bars by coating CNTs modified resin in simulated pore solution of seawater sea sand concrete

[1]  Deju Zhu,et al.  Durability of Bfrp Bars Embedded in Seawater Sea Sand Coral Aggregate Concrete Under Simulated Seawater Environment: Effects of Coral Coarse Aggregate and Cement Contents , 2023, SSRN Electronic Journal.

[2]  C. Leung,et al.  Lowering exposure pH for durability enhancement of glass fiber reinforcement polymer (GFRP) rebars , 2022, Construction and Building Materials.

[3]  Deju Zhu,et al.  Development of a low-alkalinity seawater sea sand concrete for enhanced compatibility with BFRP bar in the marine environment , 2022, Cement and Concrete Composites.

[4]  Deju Zhu,et al.  Corrosion propagation of steel reinforcement in pre-cracked mortar attacked by seawater using wire beam electrode , 2022, Corrosion Science.

[5]  Deju Zhu,et al.  A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions , 2022, Cement and Concrete Composites.

[6]  Zhendi Wang,et al.  Anomalous matrix and interlayer pore structure of 3D-printed fiber-reinforced cementitious composites , 2022, Cement and Concrete Research.

[7]  Deju Zhu,et al.  Tensile properties deterioration of BFRP bars in simulated pore solution and real seawater sea sand concrete environment with varying alkalinities , 2022, Composites Part B: Engineering.

[8]  Deju Zhu,et al.  Static and dynamic tensile behaviors of BFRP bars embedded in seawater sea sand concrete under marine environment , 2022, Composites Part B: Engineering.

[9]  X. Liu,et al.  In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs , 2022, Composites Science and Technology.

[10]  Chuansheng Xiong,et al.  Deterioration of basalt/carbon-based hybrid-FRP bars in a simulated pore solution of seawater sea-sand concrete , 2022, Journal of Building Engineering.

[11]  C. Shi,et al.  Mitigating the deterioration of BFRP bars in seawater sea sand mortar by reducing alkalinity , 2022, Construction and Building Materials.

[12]  Xiangke Guo,et al.  Deterioration of mechanical properties of basalt/carbon hybrid FRP bars in SWSC under seawater corrosive environment , 2022, Construction and Building Materials.

[13]  Gang Wu,et al.  Shear behavior of hybrid seawater sea-sand concrete short beams reinforced with BFRP reinforcements , 2021, Engineering Structures.

[14]  P. Feng,et al.  Non-uniform fiber-resin distributions of pultruded GFRP profiles , 2021, Composites Part B: Engineering.

[15]  G. Seidel,et al.  Enhancement of Mode I fracture toughness properties of epoxy reinforced with graphene nanoplatelets and carbon nanotubes , 2021 .

[16]  D. Askari,et al.  Enhancing the short-beam strength of composite laminates using helical carbon nanotubes , 2021 .

[17]  Deju Zhu,et al.  Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment , 2021 .

[18]  Daniel J. Sakoda,et al.  Electrical behavior of CNT epoxy composites under in-situ simulated space environments , 2021 .

[19]  Zhongyu Lu,et al.  Bond durability of BFRP bars embedded in concrete with fly ash in aggressive environments , 2021 .

[20]  Yu Bai,et al.  Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments , 2020, Composites Part B: Engineering.

[21]  Yunfu Ou,et al.  Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils , 2020, 2012.00071.

[22]  Weibang Lu,et al.  Effects of loading rates on mode I interlaminar fracture toughness of carbon/epoxy composite toughened by carbon nanotube films , 2020 .

[23]  Guofu Zhou,et al.  Uniform honeycomb CNT-microparticles prepared via droplet-microfluidics and sacrificial nanoparticles for electrochemical determination of methyl parathion , 2020 .

[24]  J. H. Park,et al.  Multiwalled carbon nanotube pretreatment to enhance tensile properties, process stability, and filler dispersion of polyamide 66 nanocomposites , 2020 .

[25]  Deju Zhu,et al.  A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete , 2020 .

[26]  B. Benmokrane,et al.  Bar size effect on long-term durability of sand-coated basalt-FRP composite bars , 2020 .

[27]  K. Rhee,et al.  Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface , 2020 .

[28]  Chunhua Lu,et al.  Comparative Investigation on Tensile Performance of FRP Bars after Exposure to Water, Seawater, and Alkaline Solutions , 2020 .

[29]  P. Feng,et al.  A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects , 2020 .

[30]  F. Abed,et al.  Durability of basalt FRP reinforcing bars in alkaline solution and moist concrete environments , 2020 .

[31]  Zhongyu Lu,et al.  Long-term shear performance of bare and cement mortar-coated BFRP bars in corrosive environments , 2020 .

[32]  M. Hamadanian,et al.  Multi-walled carbon nanotube and carbon nanofiber/ polyacrylonitrile aerogel scaffolds for enhanced epoxy resins , 2019, Composites Part B: Engineering.

[33]  A. Pantano,et al.  Novel non-destructive evaluation technique for the detection of poor dispersion of carbon nanotubes in nanocomposites , 2019, Composites Part B: Engineering.

[34]  B. Benmokrane,et al.  Durability performance and long-term prediction models of sand-coated basalt FRP bars , 2019 .

[35]  R. K. Singh Raman,et al.  Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment , 2018, Corrosion Science.

[36]  Gang Wu,et al.  Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars , 2018, Corrosion Science.

[37]  M. A. Pisani,et al.  Effect of the environment on the performance of GFRP reinforcing bars , 2018 .

[38]  Gang Wu,et al.  Durability study on interlaminar shear behaviour of basalt-, glass- and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment , 2017 .

[39]  S. Hong,et al.  Improvement of modulus, strength and fracture toughness of CNT/Epoxy nanocomposites through the functionalization of carbon nanotubes , 2017 .

[40]  Benoit Fournier,et al.  Determination of the pH and the free alkali metal content in the pore solution of concrete: Review and experimental comparison , 2017 .

[41]  Guijun Xian,et al.  Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment , 2017 .

[42]  B. Benmokrane,et al.  Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures , 2017 .

[43]  P. K. Ghosh,et al.  Thermo-mechanical and anti-corrosive properties of MWCNT/epoxy nanocomposite fabricated by innovative dispersion technique , 2017 .

[44]  Jianfeng Shen,et al.  The hygrothermal aging process and mechanism of the novolac epoxy resin , 2016 .

[45]  M. Endo,et al.  Development of high-performance resin nanocomposites by resin cellulation using multi-walled carbon nanotubes , 2016 .

[46]  Ahmed El Refai,et al.  Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions , 2015 .

[47]  Alberto Escarpa,et al.  Carbon nanotubes press-transferred on PMMA substrates as exclusive transducers for electrochemical microfluidic sensing. , 2012, Analytical chemistry.

[48]  Julio F. Davalos,et al.  Effect of FRP bar degradation on interface bond with high strength concrete , 2008 .

[49]  Peng Wang,et al.  Durability of Glass Fiber-Reinforced Polymer Reinforcing Bars in Concrete Environment , 2002 .

[50]  Zhongyu Lu,et al.  Durability of BFRP bars wrapped in seawater sea sand concrete , 2021 .