Synthesis, characterization, and application of reversible PDLLA-PEG-PDLLA copolymer thermogels in vitro and in vivo

In this study, a series of injectable thermoreversible and thermogelling PDLLA-PEG-PDLLA copolymers were developed and a systematic evaluation of the thermogelling system both in vitro and in vivo was performed. The aqueous PDLLA-PEG-PDLLA solutions above a critical gel concentration could transform into hydrogel spontaneously within 2 minutes around the body temperature in vitro or in vivo. Modulating the molecular weight, block length and polymer concentration could adjust the sol-gel transition behavior and the mechanical properties of the hydrogels. The gelation was thermally reversible due to the physical interaction of copolymer micelles and no crystallization formed during the gelation. Little cytotoxicity and hemolysis of this polymer was found, and the inflammatory response after injecting the hydrogel to small-animal was acceptable. In vitro and in vivo degradation experiments illustrated that the physical hydrogel could retain its integrity as long as several weeks and eventually be degraded by hydrolysis. A rat model of sidewall defect-bowel abrasion was employed, and a significant reduction of post-operative adhesion has been found in the group of PDLLA-PEG-PDLLA hydrogel-treated, compared with untreated control group and commercial hyaluronic acid (HA) anti-adhesion hydrogel group. As such, this PDLLA-PEG-PDLLA hydrogel might be a promising candidate of injectable biomaterial for medical applications.

[1]  J. Feijen,et al.  Stereocomplex Mediated Gelation of PEG‐(PLA)2 and PEG‐(PLA)8 Block Copolymers , 2005 .

[2]  Zhiyuan Zhong,et al.  In-situ formation of biodegradable hydrogels by stereocomplexation of PEG-(PLLA)8 and PEG-(PDLA)8 star block copolymers. , 2006, Biomacromolecules.

[3]  C. Gong,et al.  Thermosensitive polymeric hydrogels as drug delivery systems. , 2012, Current medicinal chemistry.

[4]  Lin Yu,et al.  An injectable thermogel with high radiopacity. , 2015, Chemical communications.

[5]  G. Tew,et al.  Rheological studies of PLLA-PEO-PLLA triblock copolymer hydrogels. , 2004, Biomaterials.

[6]  Z. Qian,et al.  Biodegradable and thermosensitive monomethoxy poly(ethylene glycol)-poly(lactic acid) hydrogel as a barrier for prevention of post-operative abdominal adhesion. , 2014, Journal of biomedical nanotechnology.

[7]  C. Gong,et al.  Novel thermosensitive hydrogel for preventing formation of abdominal adhesions , 2013, International journal of nanomedicine.

[8]  Yourong Duan,et al.  Novel thymopentin release systems prepared from bioresorbable PLA-PEG-PLA hydrogels. , 2010, International journal of pharmaceutics.

[9]  H. van Goor,et al.  Different surgical techniques to reduce post-operative adhesion formation: a systematic review and meta-analysis. , 2013, Human reproduction update.

[10]  D. Han,et al.  Micellization and Gelation of Aqueous Solutions of Star-Shaped PLLA-PEO Block Copolymers , 2003 .

[11]  C. Hou,et al.  A thermosensitive chitosan-based hydrogel barrier for post-operative adhesions' prevention. , 2009, Biomaterials.

[12]  Yuquan Wei,et al.  Biodegradable in situ gel-forming controlled drug delivery system based on thermosensitive PCL-PEG-PCL hydrogel. Part 2: sol-gel-sol transition and drug delivery behavior. , 2009, Acta biomaterialia.

[13]  B. Jeong,et al.  Temperature-responsive compounds as in situ gelling biomedical materials. , 2012, Chemical Society reviews.

[14]  D. S. Lee,et al.  Thermoresponsive phase transitions of PLA-block-PEO-block-PLA triblock stereo-copolymers in aqueous solution , 2002 .

[15]  Sung Wan Kim,et al.  Biodegradable block copolymers as injectable drug-delivery systems , 1997, Nature.

[16]  Thomas Zimmerman,et al.  Prevention of Postsurgery-Induced Abdominal Adhesions by Electrospun Bioabsorbable Nanofibrous Poly(lactide-co-glycolide)-Based Membranes , 2004, Annals of surgery.

[17]  R. Zhuo,et al.  Synthesis and gelation properties of PEG-PLA-PEG triblock copolymers obtained by coupling monohydroxylated PEG-PLA with adipoyl chloride. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[18]  Tomoko Fujiwara,et al.  Novel thermo-responsive formation of a hydrogel by stereo-complexation between PLLA-PEG-PLLA and PDLA-PEG-PDLA block copolymers , 2001 .

[19]  Zhipeng Hou,et al.  Photoactivated Composite Biomaterial for Soft Tissue Restoration in Rodents and in Humans , 2011, Science Translational Medicine.

[20]  Yuquan Wei,et al.  Biodegradable in situ gel-forming controlled drug delivery system based on thermosensitive PCL-PEG-PCL hydrogel: part 1--Synthesis, characterization, and acute toxicity evaluation. , 2009, Journal of pharmaceutical sciences.

[21]  Michel Vert,et al.  Synthesis, characterization, and stereocomplex-induced gelation of block copolymers prepared by ring-opening polymerization of L(D)-lactide in the presence of poly(ethylene glycol) , 2003 .

[22]  Karin Schillén,et al.  Micelle and gel formation in a poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer in water solution: dynamic and static light scattering and oscillatory shear measurements , 1991 .

[23]  J. Leroux,et al.  In situ-forming hydrogels--review of temperature-sensitive systems. , 2004, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[24]  Qinjie Wu,et al.  Efficient inhibition of colorectal peritoneal carcinomatosis by drug loaded micelles in thermosensitive hydrogel composites. , 2012, Nanoscale.

[25]  Sung Wan Kim,et al.  Thermoreversible Gelation of PEG−PLGA−PEG Triblock Copolymer Aqueous Solutions , 1999 .

[26]  J. Hao,et al.  Thermogelling hydrogels of poly(ε‐caprolactone‐co‐D,L‐lactide)–poly(ethylene glycol)–poly(ε‐caprolactone‐co‐D,L‐lactide) and poly(ε‐caprolactone‐co‐L‐lactide)–poly(ethylene glycol)–poly(ε‐caprolactone‐co‐L‐lactide) aqueous solutions , 2007 .

[27]  B. Jeong,et al.  Recent progress of in situ formed gels for biomedical applications , 2013 .

[28]  D. Kohane,et al.  Prevention of peritoneal adhesions with an in situ cross-linkable hyaluronan hydrogel delivering budesonide. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[29]  Woo-Kul Lee,et al.  Gelation Behavior of Poly(ethylene glycol) and Polycaprolactone Triblock and Multiblock Copolymer Aqueous Solutions , 2006 .

[30]  Lin Yu,et al.  Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water , 2007 .

[31]  T. Johnston,et al.  Mechanism of poloxamer 407-induced hypertriglyceridemia in the rat. , 1993, Biochemical pharmacology.

[32]  You Han Bae,et al.  Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol). , 2006, Biomacromolecules.

[33]  Lin Yu,et al.  Biodegradable and thermoreversible PCLA-PEG-PCLA hydrogel as a barrier for prevention of post-operative adhesion. , 2011, Biomaterials.

[34]  Ling Li,et al.  Biodegradable and injectable in situ cross-linking chitosan-hyaluronic acid based hydrogels for postoperative adhesion prevention. , 2014, Biomaterials.

[35]  Sung Wan Kim,et al.  Novel Thermoreversible Gelation of Biodegradable PLGA-block-PEO-block-PLGA Triblock Copolymers in Aqueous Solution , 2001 .

[36]  Lin Yu,et al.  Biodegradability and biocompatibility of thermoreversible hydrogels formed from mixing a sol and a precipitate of block copolymers in water. , 2010, Biomacromolecules.

[37]  Christopher J. Froelich,et al.  Sustained Delivery of Interleukin-2 from a Poloxamer 407 Gel Matrix Following Intraperitoneal Injection in Mice , 1992, Pharmaceutical Research.

[38]  Lin Yu,et al.  Tumor regression achieved by encapsulating a moderately soluble drug into a polymeric thermogel , 2014, Scientific Reports.