Population balance modelling of droplet coalescence and break-up in an oscillatory baffled reactor

This paper presents new population balance analysis to describe simultaneous coalescence and break-up in the formation of methylmethacrylate droplets in a batch oscillatory baffled reactor. It is concluded that the droplet data can very well be described by a model in which coalescence is taken to be shear induced, selection for break-up proceeds at a rate proportional to droplet volume and approximately four equally sized break-up fragments are produced per break-up event. It is shown that the experimental droplet size distribution data are self-similar in form and exhibit asymptotic behaviour characteristics also seen in the model. The coalescence rate is found to vary as the square of the oscillation frequency and the selection rate to vary with the oscillation frequency to the power five. As a result the asymptotic mean droplet volume is inversely proportional to the oscillation frequency.

[1]  Malcolm R. Mackley,et al.  Chemical reaction in batch pulsatile flow and stirred tank reactors , 1993 .

[2]  Aniruddha B. Pandit,et al.  Enhancement of gas-liquid mass transfer using oscillatory flow in a baffled tube , 1993 .

[3]  Doraiswami Ramkrishna,et al.  Population Balances: Theory and Applications to Particulate Systems in Engineering , 2000 .

[4]  M. Hounslow,et al.  A discretized population balance for nucleation, growth, and aggregation , 1988 .

[5]  Xiongwei Ni,et al.  A comparative study of mass transfer in yeast for a batch pulsed baffled bioreactor and a stirred tank fermenter , 1995 .

[6]  Malcolm R. Mackley,et al.  Experimental heat transfer measurements for pulsatile flow in baffled tubes , 1990 .

[7]  J. Pinto,et al.  Mathematical modeling of polystyrene particle size distribution produced by suspension polymerization , 2000 .

[8]  Xiongwei Ni,et al.  An investigation of droplet size and size distribution in methylmethacrylate suspensions in a batch oscillatory-baffled reactor , 1998 .

[9]  Malcolm R. Mackley,et al.  Mixing and dispersion in a baffled tube for steady laminar and pulsatile flow , 1991 .

[10]  T. Serra,et al.  Effect of the shear and volume fraction on the aggregation and breakup of particles , 1998 .

[11]  S. Pratsinis,et al.  Coagulation and Fragmentation: The Variation of Shear Rate and the Time Lag for Attainment of Steady State , 1996 .

[12]  Malcolm R. Mackley,et al.  Experimental observations on flow patterns and energy losses for oscillatory flow in ducts containing sharp edges , 1989 .

[13]  J. Alvarez,et al.  A population balance approach for the description of particle size distribution in suspension polymerization reactors , 1994 .

[14]  Xiongwei Ni,et al.  Correlation of polymer particle size with droplet size in suspension polymerisation of methylmethacrylate in a batch oscillatory-baffled reactor , 1999 .

[15]  Malcolm R. Mackley,et al.  Experimental fluid dispersion measurements in periodic baffled tube arrays , 1993 .

[16]  X. Ni,et al.  Inverse phase suspension polymerization of acrylamide in a batch oscillatory baffled reactor , 2000 .

[17]  Michael J. Hounslow,et al.  Tracer studies of high‐shear granulation: II. Population balance modeling , 2001 .

[18]  Clive A. Greated,et al.  Experimental Study of Flocculation of Bentonite and Alcaligenes Eutrophus in a Batch Oscillatory Baffled Flocculator , 2001 .

[19]  Patrick T. Spicer,et al.  Coagulation and fragmentation: Universal steady‐state particle‐size distribution , 1996 .

[20]  Costas Kiparissides,et al.  Prediction of particle size distribution in suspension polymerization reactors: effect of turbulence nonhomogeneity , 2000 .