Potential application of geopolymers as protection coatings for marine concrete I. Basic properties

Abstract Coatings can extend the service life of concrete structures exposed to marine environments by inhibiting the intrusion of corrosive ions. In the present paper, the possibility of using geopolymer as an innovative inorganic coating for marine concrete protection was evaluated by 5 basic properties: setting time, permeability, anticorrosion and bond strength as well as volume stability. Fresh coat needed about 2 h to finally set at 25 °C. A compound geopolymer was developed by adding 10% granulated blast furnace slag (GBFS) in metakaolin as starting materials at the liquid/solid ratio of 0.60 ml/g. The presence of GBFS had a beneficial effect on reducing the permeability of the geopolymer. Although the strength development was relatively slower under the condition of seawater curing, it convincingly confirmed that geopolymer had excellent anticorrosion property. Furthermore, the average bond strength between geopolymer and cement paste or between geopolymer and mortar was higher than 1.5 MPa, which could be explained by the coexistence of calcium silicate hydrate (C–S–H) gels in cement and geopolymer matrix under strong alkaline condition. In addition, the large shrinkage of the geopolymer was controlled by using polypropylene (PP) fiber and self-prepared MgO expansion agent, later of which could produce a shrinkage compensating effect.

[1]  Subaer,et al.  Thermo-mechanical and microstructural characterisation of sodium-poly(sialate-siloxo) (Na-PSS) geopolymers , 2007 .

[2]  J. Deventer,et al.  Erosion of geopolymers made from industrial waste , 2007 .

[3]  Yao Xiao,et al.  Role of water in the synthesis of calcined kaolin-based geopolymer , 2009 .

[4]  C. Yip,et al.  Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder , 2003 .

[5]  María Teresa Blanco-Varela,et al.  Chemical stability of cementitious materials based on metakaolin , 1999 .

[6]  J. Deventer,et al.  Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry , 2007 .

[7]  J. Deventer,et al.  The effects of inorganic salt contamination on the strength and durability of geopolymers , 2002 .

[8]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[9]  Marcelo Henrique Farias de Medeiros,et al.  Surface treatment of reinforced concrete in marine environment: Influence on chloride diffusion coefficient and capillary water absorption , 2009 .

[10]  P. Hewlett,et al.  Lea's chemistry of cement and concrete , 2001 .

[11]  S. Alonso,et al.  Calorimetric study of alkaline activation of calcium hydroxide–metakaolin solid mixtures , 2001 .

[12]  M. Villarroel,et al.  Corrosion products of reinforcement in concrete in marine and industrial environments , 2009 .

[13]  Priyan Mendis,et al.  Engineering properties of inorganic polymer concretes (IPCs) , 2007 .

[14]  Hongxi Wang,et al.  Bonding and abrasion resistance of geopolymeric repair material made with steel slag , 2008 .

[15]  J. Deventer,et al.  Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. , 2007, Journal of hazardous materials.

[16]  Zhang Yunsheng,et al.  Synthesis and heavy metal immobilization behaviors of slag based geopolymer. , 2007, Journal of hazardous materials.

[17]  Min Deng,et al.  Effects of Calcination Condition on Expansion Property of MgO-type Expansive Agent Used in Cement-based Materials , 2010 .

[18]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part II. Material and leaching characteristics , 1999 .

[19]  Sudong Hua,et al.  Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer , 2009 .

[20]  T. Cheng,et al.  Fire-resistant geopolymer produced by granulated blast furnace slag , 2003 .

[21]  Pavel Rovnaník,et al.  Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer , 2010 .

[22]  V. Novokshchenov.  Deterioration of reinforced concrete in the marine industrial environment of the Arabian Gulf—A case study , 1995 .

[23]  Omar S. Baghabra Al-Amoudi,et al.  Effectiveness of surface coatings in improving concrete durability , 2003 .

[24]  Á. Palomo,et al.  Durability of alkali-activated fly ash cementitious materials , 2007 .

[25]  K. Cashman,et al.  Pore structure of volcanic clasts: Measurements of permeability and electrical conductivity , 2009 .

[26]  M. Beazi-Katsioti,et al.  The assessment of porosity and pore size distribution of limestone Portland cement pastes , 2009 .

[27]  C. Gallé,et al.  Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying , 2001 .

[28]  M. N. Bodur,et al.  Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack , 2008 .

[29]  C. C. Yang.  On the relationship between pore structure and chloride diffusivity from accelerated chloride migration test in cement-based materials , 2006 .

[30]  J. Deventer,et al.  The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation , 2005 .

[31]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[32]  T. Bakharev,et al.  Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing , 2006 .

[33]  Fernando Pacheco-Torgal,et al.  Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substrate surface treatment , 2008 .

[34]  J. Provis,et al.  Geopolymers for immobilization of Cr(6+), Cd(2+), and Pb(2+). , 2008, Journal of hazardous materials.

[35]  M. P. Rodrigues,et al.  Effectiveness of surface coatings to protect reinforced concrete in marine environments , 2000 .

[36]  Kiyoshi Okada,et al.  Water retention properties of porous geopolymers for use in cooling applications , 2009 .

[37]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[38]  Dimitri V. Val,et al.  Life-cycle cost analysis of reinforced concrete structures in marine environments , 2003 .

[39]  J.S.J. van Deventer,et al.  The interface between natural siliceous aggregates and geopolymers , 2004 .