Improved Design via Simulation of Micro-Modified PVDF and Its Copolymer Energy Harvester with High Electrical Outputs

In this work, micro-modified polyvinylidene fluoride (PVDF) and its copolymer poly(vinylidene-trifluoroethylene) (P(VDF-TrFE)) with salient enhancement in current output are demonstrated. The influence of surface-modified structure characteristics on electrical properties of energy harvester is systematically analyzed based on the finite element method. For vertical load mode, eight structures consisting of banded and disjunctive groups are compared to evaluate the voltage performance. The cylinder is proved to be the best structure of 3.25 V, compared to the pristine structure of 0.99 V (P(VDF-TrFE)). The relevant experiment has been done to verify the simulation. The relationship between radius, height, force and distance to the voltage output of the cylinder allocation is discussed. For periodical changing load mode, the cylinder modified structure shows a conspicuous enhancement in current output. The suitable resistance, current–voltage and frequency, the relationship between loading speed and current, and the ductility of current loading are studied. For 30 kHz, the peak current is 20 times larger than the flat plate structure. Tip shape mode and fusiform shape mode are found, which show the different shapes of the peak current-frequency curves. Four electrical loading circuit properties are also discussed: the suitable resistance of the system, synchronism of current and voltage, time delay nature of energy harvester and current-loading relationship. The simulation results can provide some theoretical basis for designing the energy harvester and piezoelectric nanogenerator (PENG).

[1]  Minbaek Lee,et al.  Mechanical and electrical characterization of PVDF-ZnO hybrid structure for application to nanogenerator , 2017 .

[2]  Hi Gyu Moon,et al.  Powerful curved piezoelectric generator for wearable applications , 2015 .

[3]  L. Brown,et al.  Disposable PVDF ultrasonic transducers for nondestructive testing applications , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  K. Sridevi,et al.  Investigations on Ferroelectric PZT-PVDF Composites of 0–3 Connectivity , 2005 .

[5]  Pooi See Lee,et al.  A high-performance soft actuator based on a poly(vinylidene fluoride) piezoelectric bimorph , 2019, Smart Materials and Structures.

[6]  Ali Akbar Yousefi,et al.  Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin films , 2007 .

[7]  Yunfei Ding,et al.  Synthesis of flexible aerogel composites reinforced with electrospun nanofibers and microparticles for thermal insulation , 2013 .

[8]  Chengkuo Lee,et al.  A scrape-through piezoelectric MEMS energy harvester with frequency broadband and up-conversion behaviors , 2011 .

[9]  Shiqiao Gao,et al.  Design, fabrication and performances of MEMS piezoelectric energy harvester , 2015 .

[10]  Chunsheng Yang,et al.  A flexible triboelectric-piezoelectric hybrid nanogenerator based on P(VDF-TrFE) nanofibers and PDMS/MWCNT for wearable devices , 2016, Scientific Reports.

[11]  Pierre Ueberschlag,et al.  PVDF piezoelectric polymer , 2001 .

[12]  Piercarlo Mustarelli,et al.  Structure, porosity and conductivity of PVdF films for polymer electrolytes , 2001 .

[13]  Huen Lee,et al.  Ionic liquid–polymer gel electrolytes based on morpholinium salt and PVdF(HFP) copolymer , 2006 .

[14]  K. Yao,et al.  Nanoconfinement induced crystal orientation and large piezoelectric coefficient in vertically aligned P(VDF-TrFE) nanotube array , 2015, Scientific Reports.

[15]  Yizhi Liu,et al.  A Three-Dimensional and Bi-objective Topological Optimization Approach Based on Piezoelectric Energy Harvester , 2020 .

[16]  Hern Kim,et al.  Thermal degradation and kinetic analysis of PVDF/modified MMT nanocomposite membranes , 2008 .

[17]  B. Lu,et al.  High-Performance Piezoelectric Nanogenerators with Imprinted P(VDF-TrFE)/BaTiO3 Nanocomposite Micropillars for Self-Powered Flexible Sensors. , 2017, Small.

[18]  Hongchen Song,et al.  Effect of coupling agents on the dielectric properties of CaCu3Ti4O12/PVDF composites , 2013 .

[19]  F. Costa,et al.  P2E-3 Power Harvesting Using Piezoelectric MEMS Generator with Interdigital Electrodes , 2007, 2007 IEEE Ultrasonics Symposium Proceedings.

[20]  K. Kakimoto,et al.  Fabrication of fibrous BaTiO3-reinforced PVDF composite sheet for transducer application , 2013 .

[21]  Zhong Lin Wang,et al.  Flexible triboelectric generator , 2012 .

[22]  M. Kosec,et al.  Dielectric relaxation in ferroelectric PZT–PVDF nanocomposites , 2002 .

[23]  Jinyou Shao,et al.  Flexible three-axial tactile sensors with microstructure-enhanced piezoelectric effect and specially-arranged piezoelectric arrays , 2018 .

[24]  Zhuo Xu,et al.  Electric energy storage properties of poly(vinylidene fluoride) , 2010 .

[25]  N.R. Harris,et al.  A free-standing, thick-film piezoelectric energy harvester , 2008, 2008 IEEE Sensors.

[26]  X. Liu,et al.  Microstructure and properties of novel SPEEK/PVDF-g-PSSA blends for proton exchange membrane with improved compatibility , 2015 .

[27]  Tiandong Zhang,et al.  Excellent Energy Storage of Sandwich-Structured PVDF-Based Composite at Low Electric Field by Introduction of the Hybrid CoFe2O4@BZT–BCT Nanofibers , 2018 .

[28]  Youn Jung Park,et al.  Micropatterning of semicrystalline poly(vinylidene fluoride) (PVDF) solutions , 2005 .

[29]  N. Murayama,et al.  The strong piezoelectricity in polyvinylidene fluroide (PVDF) , 1976 .

[30]  A. Jayarama,et al.  Piezoelectric P(VDF-TrFE) micro cantilevers and beams for low frequency vibration sensors and energy harvesters , 2019, Sensors and Actuators A: Physical.

[31]  Wei Wang,et al.  r-Shaped hybrid nanogenerator with enhanced piezoelectricity. , 2013, ACS nano.

[32]  P. Dubois,et al.  Processing of PVDF-based electroactive/ferroelectric films: importance of PMMA and cooling rate from the melt state on the crystallization of PVDF beta-crystals. , 2018, Soft matter.

[33]  S. Ray,et al.  Structure and properties of melt-processed PVDF/PMMA/polyaniline blends , 2009 .

[34]  Tao Li,et al.  A high power ZnO thin film piezoelectric generator , 2016 .

[35]  C. Batt,et al.  Dramatic Enhancements in Toughness of Polyvinylidene Fluoride Nanocomposites via Nanoclay‐Directed Crystal Structure and Morphology , 2004 .

[36]  Anjana Jain,et al.  Dielectric and piezoelectric properties of PVDF/PZT composites: A review , 2015 .

[37]  Wenying Zhou,et al.  Thermal conductivity and dielectric properties of Al/PVDF composites , 2012 .

[38]  Chang Kyu Jeong,et al.  Piezoelectric energy conversion by lead-free perovskite BaTiO3 nanotube arrays fabricated using electrochemical anodization , 2020 .

[39]  Shi-shang Guo,et al.  A Flexible Piezoelectric Nanogenerator Based on Aligned P(VDF-TrFE) Nanofibers , 2019, Micromachines.

[40]  R. Dorey,et al.  Electrical properties of high density PZT and PMN–PT/PZT thick films produced using ComFi technology , 2004 .

[41]  R. Pinto,et al.  Simulation and analysis of P(VDF-TrFE) cantilever-beams for low frequency applications , 2020 .

[42]  Y. Sun,et al.  Ferroelectric P(VDF-TrFE)/POSS nanocomposite films: compatibility, piezoelectricity, energy harvesting performance, and mechanical and atomic oxygen erosion , 2020, RSC advances.

[43]  Sumanta Kumar Karan,et al.  Self-powered flexible Fe-doped RGO/PVDF nanocomposite: an excellent material for a piezoelectric energy harvester. , 2015, Nanoscale.

[44]  Isabelle Dufour,et al.  Optimization Of PVDF-TrFE Processing Conditions For The Fabrication Of Organic MEMS Resonators , 2016, Scientific Reports.

[45]  Ju-Hyuck Lee,et al.  Micropatterned P(VDF‐TrFE) Film‐Based Piezoelectric Nanogenerators for Highly Sensitive Self‐Powered Pressure Sensors , 2015 .

[46]  F. Foster,et al.  A history of medical and biological imaging with polyvinylidene fluoride (PVDF) transducers , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[47]  Yang Shen,et al.  Topological‐Structure Modulated Polymer Nanocomposites Exhibiting Highly Enhanced Dielectric Strength and Energy Density , 2014 .

[48]  P. Kuo,et al.  High thermal and electrochemical stability of PVDF-graft-PAN copolymer hybrid PEO membrane for safety reinforced lithium-ion battery , 2016 .

[49]  M. Platte.  PVDF ultrasonic transducers , 1987 .