A Co-Precursor Approach Coupled with a Supercritical Modification Method for Constructing Highly Transparent and Superhydrophobic Polymethylsilsesquioxane Aerogels

Polymethylsilsesquioxane (PMSQ) aerogels obtained from methyltrimethoxysilane (MTMS) are well-known high-performance porous materials. Highly transparent and hydrophobic PMSQ aerogel would play an important role in transparent vacuum insulation panels. Herein, the co-precursor approach and supercritical modification method were developed to prepare the PMSQ aerogels with high transparency and superhydrophobicity. Firstly, benefiting from the introduction of tetramethoxysilane (TMOS) in the precursor, the pore structure became more uniform and the particle size was decreased. As the TMOS content increased, the light transmittance increased gradually from 54.0% to 81.2%, whereas the contact angle of water droplet decreased from 141° to 99.9°, ascribed to the increase of hydroxyl groups on the skeleton surface. Hence, the supercritical modification method utilizing hexamethyldisilazane was also introduced to enhance the hydrophobic methyl groups on the aerogel’s surface. As a result, the obtained aerogels revealed superhydrophobicity with a contact angle of 155°. Meanwhile, the developed surface modification method did not lead to any significant changes in the pore structure resulting in the superhydrophobic aerogel with a high transparency of 77.2%. The proposed co-precursor approach and supercritical modification method provide a new horizon in the fabrication of highly transparent and superhydrophobic PMSQ aerogels.

[1]  Hailong Yang,et al.  Tailoring structural and physical properties of polymethylsilsesquioxane aerogels by adjusting NH3·H2O concentration , 2018 .

[2]  Jun Shen,et al.  Microstructure control of the silica aerogels via pinhole drying , 2017, Journal of Sol-Gel Science and Technology.

[3]  Yuehua Wu,et al.  Highly thermally stable zirconia/silica composite aerogels prepared by supercritical deposition , 2017 .

[4]  S. Nguyen,et al.  Silicacellulose hybrid aerogels for thermal and acoustic insulation applications , 2016 .

[5]  Xudong Cheng,et al.  Tailoring thermal properties of ambient pressure dried MTMS/TEOS co-precursor aerogels , 2016 .

[6]  Guorong Shan,et al.  Elastic silica aerogel using methyltrimethoxysilane precusor via ambient pressure drying , 2015, Journal of Porous Materials.

[7]  Shanyu Zhao,et al.  Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization , 2015 .

[8]  Zhenyou Li,et al.  Surface modification of bacterial cellulose aerogels' web-like skeleton for oil/water separation. , 2015, ACS applied materials & interfaces.

[9]  Jun Shen,et al.  Silica-titania composite aerogel photocatalysts by chemical liquid deposition of titania onto nanoporous silica scaffolds. , 2015, ACS applied materials & interfaces.

[10]  Yanfeng Gao,et al.  Low-density, hydrophobic, highly flexible ambient-pressure-dried monolithic bridged silsesquioxane aerogels , 2015 .

[11]  K. Kanamori Monolithic silsesquioxane materials with well-defined pore structure , 2014 .

[12]  B. Liu,et al.  Trimethylethoxysilane-modified super heat-resistant alumina aerogels for high-temperature thermal insulation and adsorption applications , 2014 .

[13]  Xudong Cheng,et al.  Preparation of ambient pressure dried MTMS/TEOS co-precursor silica aerogel by adjusting NH4OH concentration , 2014 .

[14]  Saffa Riffat,et al.  Toward aerogel based thermal superinsulation in buildings: A comprehensive review , 2014 .

[15]  K. Nakanishi,et al.  The thermal conductivity of polymethylsilsesquioxane aerogels and xerogels with varied pore sizes for practical application as thermal superinsulators , 2014 .

[16]  K. Ho,et al.  Preparation of silica aerogel/polyurethane composites for the application of thermal insulation , 2014, Journal of Polymer Research.

[17]  Jun Shen,et al.  Nanoengineering Super Heat-Resistant, Strong Alumina Aerogels , 2013 .

[18]  C. Erkey,et al.  Monolithic composites of silica aerogels by reactive supercritical deposition of hydroxy-terminated poly(dimethylsiloxane). , 2013, ACS applied materials & interfaces.

[19]  A. M. Shoushtari,et al.  Relationship analysis of processing parameters with micro and macro structure of silica aerogel dried at ambient pressure , 2013 .

[20]  Jun Shen,et al.  Greatly strengthened silica aerogels via co-gelation of binary sols with different concentrations: A method to control the microstructure of the colloids , 2013 .

[21]  J. Wu,et al.  Vacuum‐Dried Robust Bridged Silsesquioxane Aerogels , 2013, Advanced materials.

[22]  L. Ilharco,et al.  The sol-gel route to advanced silica-based materials and recent applications. , 2013, Chemical reviews.

[23]  Dairong Chen,et al.  Mechanisms of silicon alkoxide hydrolysis-oligomerization reactions: a DFT investigation. , 2012, Chemphyschem : a European journal of chemical physics and physical chemistry.

[24]  P. B. Wagh,et al.  Physico-chemical properties of silica aerogels prepared from TMOS/MTMS mixtures , 2011 .

[25]  Yuxi Yu,et al.  Preparation and surface modification mechanism of silica aerogels via ambient pressure drying , 2011 .

[26]  I. Smirnova,et al.  Effect of surface functionalization of silica aerogel on their adsorptive and release properties , 2010 .

[27]  Mohammad Hasan Abbasi,et al.  Silica aerogel; synthesis, properties and characterization , 2008 .

[28]  Kazuki Nakanishi,et al.  New Transparent Methylsilsesquioxane Aerogels and Xerogels with Improved Mechanical Properties , 2007 .

[29]  Y. Ahn,et al.  Rapid synthesis of water-glass based aerogels by in situ surface modification of the hydrogels , 2007 .

[30]  A. V. Rao,et al.  Superhydrophobic silica aerogels based on methyltrimethoxysilane precursor , 2003 .

[31]  A. V. Rao,et al.  Effect of methyltrimethoxysilane as a co-precursor on the optical properties of silica aerogels , 2001 .

[32]  H. Tamon,et al.  Control of Mesoporous Structure of Silica Aerogel Prepared from TMOS , 1997 .

[33]  Yi-Feng Lin,et al.  Solvent-resistant CTAB-modified polymethylsilsesquioxane aerogels for organic solvent and oil adsorption. , 2017, Journal of colloid and interface science.

[34]  Samuel Brunner,et al.  Mechanical properties of monolithic silica aerogels made from polyethoxydisiloxanes , 2014 .

[35]  H. Yokogawa Transparent Silica Aerogel Blocks for High-Energy Physics Research , 2011 .