EXPERIMENTAL INVESTIGATION AND COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF A AIR COOLED CONDENSER HEAT PIPE

Heat pipe of one meter length and 0.031 m outer diameter was constructed and the experiments are conducted to determine the surface and vapour temperature at steady and transient conditions for two different input power in the evaporator section and cooling the condenser section by air. A computational fluid dynamics analysis was also carried and the results under steady-state conditions are compared with the results obtained from the experiments.

[1]  Xiao Huang,et al.  Influence of wick characteristics on heat pipe performance , 2006 .

[2]  G. P. Peterson,et al.  Investigation of a Novel Flat Heat Pipe , 2005 .

[3]  Suresh V. Garimella,et al.  Transport in Flat Heat Pipes at High Heat Fluxes From Multiple Discrete Sources , 2004 .

[4]  Kambiz Vafai,et al.  Transient characterization of flat plate heat pipes during startup and shutdown operations , 2000 .

[5]  Kambiz Vafai,et al.  An experimental investigation of the thermal performance of an asymmetrical flat plate heat pipe , 2000 .

[6]  K. Vafai,et al.  Analysis of cylindrical heat pipes incorporating the effects of liquid–vapor coupling and non-Darcian transport—a closed form solution , 1999 .

[7]  Amir Faghri,et al.  Flat Miniature Heat Pipes With Micro Capillary Grooves , 1999 .

[8]  Kirk L. Yerkes,et al.  The Effects of Transverse Acceleration-Induced Body Forces on the Capillary Limit of Helically Grooved Heat Pipes , 1998 .

[9]  Hongbin Ma,et al.  The Minimum Meniscus Radius and Capillary Heat Transport Limit in Micro Heat Pipes , 1997, Microelectromechanical Systems (MEMS).

[10]  Hongbin Ma,et al.  Theoretical analysis of the maximum heat transport in triangular grooves : A study of idealized micro heat pipes , 1996 .

[11]  Hongbin Ma,et al.  Experimental Investigation of the Maximum Heat Transport in Triangular Grooves , 1996 .

[12]  G. Peterson,et al.  Analysis of the critical Weber number at the onset of liquid entrainment in capillary-driven heat pipes , 1995 .

[13]  Amir Faghri,et al.  Transient Two-Dimensional Gas-Loaded Heat Pipe Analysis , 1994 .

[14]  Mohamed S. El-Genk,et al.  A heat pipe transient analysis model , 1994 .

[15]  Mohamed S. El-Genk,et al.  An experimental investigation of the transient response of a water heat pipe , 1993 .

[16]  A. Faghri,et al.  A numerical analysis of high-temperature heat pipe startup from the frozen state , 1993 .

[17]  A. Faghri,et al.  Transient Multidimensional Analysis of Nonconventional Heat Pipes With Uniform and Nonuniform Heat Distributions , 1991 .

[18]  A. Faghri,et al.  Experimental and Numerical Analysis of Low-Temperature Heat Pipes With Multiple Heat Sources , 1991 .

[19]  Kenneth E. Torrance,et al.  Design of high-performance sintered-wick heat pipes , 1991 .

[20]  Amir Faghri,et al.  An analysis of the vapor flow and the heat conduction through the liquid-wick and pipe wall in a heat pipe with single or multiple heat sources , 1990 .

[21]  Won Soon Chang,et al.  Porosity and Effective Thermal Conductivity of Wire Screens , 1990 .

[22]  Scott K. Thomas,et al.  Performance Characteristics of a Concentric Annular Heat Pipe: Part I—Experimental Prediction and Analysis of the Capillary Limit , 1989 .

[23]  Amir Faghri,et al.  A NUMERICAL ANALYSIS OF THE EFFECTS OF CONJUGATE HEAT TRANSFER, VAPOR COMPRESSIBILITY, AND VISCOUS DISSIPATION IN HEAT PIPES , 1989 .

[24]  Amir Faghri,et al.  Simultaneous axial conduction in the fluid and the pipe wall for forced convective laminar flow with blowing and suction at the wall , 1989 .

[25]  Seok-Ho Rhi,et al.  Thermal characteristics of grooved heat pipe with hybrid nanofluids , 2011 .

[26]  Velraj Ramalingam,et al.  Experimental investigation and CFD analysis of a air cooled condenser heat pipe , 2011 .

[27]  Lutful Sakib Mahmood,et al.  Experimental study on the performance limitation of micro heat pipes of non circular cross-sections , 2008 .

[28]  Daniel K. Harris,et al.  The heat transfer limit of step-graded metal felt heat pipe wicks , 2005 .

[29]  K. Vafai,et al.  Optimization analysis of a disk-shaped heat pipe , 1996 .

[30]  Amir Faghri,et al.  A study of circumferentially-heated and block-heated heat pipes. I - Experimental analysis and generalized analytical prediction of capillary limits. II - Three-dimensional numerical modeling as a conjugate problem , 1993 .

[31]  Yiding Cao,et al.  TRANSIENT TWO-DIMENSIONAL COMPRESSIBLE ANALYSIS FOR HIGH-TEMPERATURE HEAT PIPES WITH PULSED HEAT INPUT , 1991 .