Large eddy simulation on trenched film cooling with forward and backward injections under pulsed conditions

[1]  Chunhua Wang,et al.  Effect of Coolant Pulsation on Film Cooling Performance on Flat Plate , 2022, Applied Thermal Engineering.

[2]  J. Pu,et al.  Overall thermal performances of backward film cooling with simulated surface thermal barrier coatings at various walls , 2022, Case Studies in Thermal Engineering.

[3]  Zhongqi Wang,et al.  Large eddy simulation of pulsed film cooling with vortex generators , 2021 .

[4]  J. Kwak,et al.  Effects of trench configuration on the film cooling effectiveness of a fan-shaped hole , 2021 .

[5]  W. Sanz,et al.  Effect of Different Subgrid-Scale Models and Inflow Turbulence Conditions on the Boundary Layer Transition in a Transonic Linear Turbine Cascade , 2021, International Journal of Turbomachinery, Propulsion and Power.

[6]  J. Pu,et al.  Effect of transverse trench on film cooling performances of typical fan-shaped film-holes at concave and convex walls , 2021 .

[7]  Xiaoze Du,et al.  Numerical evaluation of film cooling performance of transverse trenched holes with shaped lips , 2021 .

[8]  J. Pu,et al.  Experimental investigation of inclination angle effect on unsteady film coverage of double-row staggered-holes at vane leading edge using time-resolved quantitative light sheet technique , 2021 .

[9]  V. Terekhov,et al.  Experimental study of the effect of a transverse trench depth on film cooling effectiveness , 2021, Case Studies in Thermal Engineering.

[10]  Bengt Sundén,et al.  Effect and optimization of backward hole parameters on film cooling performance by Taguchi method , 2020, Energy Conversion and Management.

[11]  R. Vedula,et al.  Film cooling performance measurement over a flat plate for a single row of holes embedded in an inclined trench , 2020 .

[12]  S. Wang,et al.  Large eddy simulation of the trenched film cooling hole with different compound angles and coolant inflow orientation effects , 2019 .

[13]  S. Wang,et al.  Large eddy simulation of film cooling flow from round and trenched holes , 2019 .

[14]  You Liu,et al.  Transient simulation of pulsed purge film cooling on flow and thermal characteristics of a turbine endwall , 2019, Applied Thermal Engineering.

[15]  S. Wang,et al.  Improvement of film cooling performance by trenched holes on turbine leading-edge models , 2019, Numerical Heat Transfer, Part A: Applications.

[16]  Jian-Hua Wang,et al.  Influence of flat endwall simplification in gas turbines on cooling performance , 2019, International Journal of Heat and Mass Transfer.

[17]  Hui Hu,et al.  Unsteady analysis of adiabatic film cooling effectiveness behind circular, shaped, and sand-dune–inspired film cooling holes: Measurement using fast-response pressure-sensitive paint , 2018, International Journal of Heat and Mass Transfer.

[18]  Meinhard T. Schobeiri,et al.  Experimental and Numerical Investigation of Heat Transfer and Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Unsteady Wake Flow Condition , 2017 .

[19]  Shiyi Chen,et al.  Effects of approaching main flow boundary layer on flow and cooling performance of an inclined jet in cross flow , 2016 .

[20]  Jian-Hua Wang,et al.  Numerical investigations of pulsed film cooling on an entire turbine vane , 2015 .

[21]  H. Cho,et al.  Enhancement of Film Cooling Effectiveness Using Backward Injection Holes , 2015 .

[22]  S. Acharya,et al.  Modal Analysis of Inclined Film Cooling Jet Flow , 2014 .

[23]  M. Polanka,et al.  Scaling of Film Cooling Performance From Ambient to Engine Temperatures , 2014 .

[24]  Jason E. Albert,et al.  Measurements of adiabatic film and overall cooling effectiveness on a turbine vane pressure side with a trench , 2013 .

[25]  Krishnan Mahesh,et al.  The Interaction of Jets with Crossflow , 2013 .

[26]  Reza S. Abhari,et al.  Influence of Flow Structure on Compound Angled Film Cooling Effectiveness and Heat Transfer , 2011 .

[27]  Li He,et al.  Experimental Investigation Into Unsteady Effects on Film Cooling , 2010 .

[28]  Giuseppe Franchini,et al.  Effects of Trenched Holes on Film Cooling of a Contoured Endwall Nozzle Vane , 2010 .

[29]  Karen A. Thole,et al.  Film-Cooling Flowfields With Trenched Holes on an Endwall , 2009 .

[30]  F. Muldoon,et al.  DNS study of pulsed film cooling for enhanced cooling effectiveness , 2009 .

[31]  F. Nicoud,et al.  Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient Tensor , 1999 .

[32]  A. Roshko,et al.  Vortical structure in the wake of a transverse jet , 1994, Journal of Fluid Mechanics.

[33]  D. Bogard,et al.  Film-cooling effectiveness downstream of a single row of holes with variable density ratio , 1990 .

[34]  D. Bogard,et al.  Effects of Density Ratio on the Hydrodynamics of Film Cooling , 1989 .

[35]  Yingzheng Liu,et al.  Experimental study of time-resolved simultaneous velocity and concentration fields of an inclined jet in crossflow , 2022, International Journal of Heat and Mass Transfer.

[36]  Kwang‐Yong Kim,et al.  Numerical Investigation of Heat Transfer Characteristics of Pin-Fins with Roughed Endwalls in Gas Turbine Blade Internal Cooling Channels , 2022, SSRN Electronic Journal.

[37]  Jun Li,et al.  Experimental and numerical investigation on the film cooling performance of cylindrical hole and fan-shaped hole with vortex generator fed by crossflow , 2022, International Journal of Heat and Mass Transfer.

[38]  J. Pu,et al.  Experimental study of transverse trench effect on unsteady film cooling effectiveness of backward cylindrical-holes with various compound angles , 2021 .

[39]  M. R. Ravi,et al.  Experimental and numerical studies on film cooling with reverse/backward coolant injection , 2017 .

[40]  Srinath V. Ekkad,et al.  Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches , 2007 .

[41]  Ronald Scott Bunker,et al.  Film Cooling Effectiveness Due to Discrete Holes Within a Transverse Surface Slot , 2002 .