Quantification of blood volume by electrical impedance tomography using a tissue-equivalent phantom.

An in vivo electrical impedance tomography (EIT) system was designed to accurately estimate quantities of intra-peritoneal blood in the abdominal cavity. For this it is essential that the response is relatively independent of the position of the high conductivity anomaly (blood) in the body. The sensitivity of the system to the introduction of blood-equivalent resistivity anomalies was assessed by using a cylindrical tissue-equivalent phantom. It was found that a satisfactorily uniform response of the system in both radial (transverse) and axial (longitudinal) directions in the phantom could be achieved by filtering resistivity profile images obtained by EIT measurement, and by using extended electrodes to collect data. Post-processing of single impedance images gave rise to a quantity denoted the resistivity index. A filter was then used to remove the remaining radial variation of the resistivity index. It was calculated by evaluating the resistivity index of a number of theoretically calculated images, and constructing a correction filter similar to those used to remove lens imperfections, such as coma, in optical components. The 30% increase in the resistivity index observed when an anomaly was moved to the maximum extent allowed by the filter calculation (0.75 of the phantom radius) was reduced by the filter to 6%. A study of the axial dependence observed in the resistivity index using electrodes extended in the axial direction by +/-5 cm found that the variation in resistivity index with axial position was about half of that observed using small circular electrodes similar to those used in the Sheffield mark I system.

[1]  Brian H. Brown,et al.  Imaging spatial distributions of resistivity using applied potential tomography , 1983 .

[2]  Thomas S. Huang,et al.  Inverse filtering for linear shift-variant imaging systems , 1972 .

[3]  P. Hua,et al.  Measuring lung resistivity using electrical impedance tomography , 1992, IEEE Transactions on Biomedical Engineering.

[4]  B. Brown,et al.  Recent Developments in Applied Potential Tomography-APT , 1986 .

[5]  I. Sutherland,et al.  Correction of the non-uniform spatial sensitivity of electrical impedance tomography images. , 1994, Physiological measurement.

[6]  Avner Friedman,et al.  Identification of small inhomogeneities of extreme conductivity by boundary measurements: a theorem on continuous dependence , 1989 .

[7]  Michael Vogelius,et al.  A backprojection algorithm for electrical impedance imaging , 1990 .

[8]  Brian H. Brown,et al.  Limitations to SV determination from APT images , 1989, Images of the Twenty-First Century. Proceedings of the Annual International Engineering in Medicine and Biology Society,.

[9]  J. Newell,et al.  Theory and performance of an adaptive current tomography system. , 1988, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

[10]  B H Brown,et al.  The Sheffield data collection system. , 1987, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

[11]  B H Brown,et al.  Applied potential tomography: a new non-invasive technique for assessing gastric function. , 1987, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

[12]  Giovanni Alessandrini.  Stability for the crack determination problem , 1993 .