Extended finite element method analysis for shielding and amplification effect of a main crack interacted with a group of nearby parallel microcracks

The shielding and amplification effects of transverse array of microcracks on a main crack are investigated using extended finite element method. The interaction between macrocracks and microcracks is quantitatively characterized in terms of the stress intensity factor which is calculated by the interaction integral method and the complete stress field in the entire domain could be given without remeshing. Various distributions of microcracks with different number, location, and density are considered. For a microcrack collinear to the main crack, the numerical results agree quite well with the analytical solution. Interestingly, the shielding and amplification effects display periodicity when the main crack is placed inside the microcrack rows. In particular, the minimum stress intensity factor of the main crack which refers to the maximum shielding effect is primarily determined by the nearest microcracks. However, the maximum stress intensity factor is largely affected by the distribution and density of microcracks and even could be turned from enhancement to shielding. The results are consistent with the microcrack-toughening phenomenon observed in the experiments and are meaningful for the design of new microstructure-toughening materials.

[1]  Anthony G. Evans,et al.  Some effects of microcracks on the mechanical properties of brittle solids—I. Stress, strain relations , 1985 .

[2]  Ted Belytschko,et al.  XFEM modeling of ultrasonic wave propagation in polymer matrix particulate/fibrous composites , 2013 .

[3]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[4]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[5]  N. Miyata,et al.  Microcrack Toughening Mechanism in Brittle Matrix Composites , 1992 .

[6]  Brian Moran,et al.  Crack tip and associated domain integrals from momentum and energy balance , 1987 .

[7]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[8]  Asher A. Rubinstein,et al.  Macrocrack interaction with semi-infinite microcrack array , 1985, International Journal of Fracture.

[9]  A. Evans.  On the formation of a crack tip microcrack zone , 1976 .

[10]  A. Carpinteri,et al.  STRESS FIELD INTERACTION AND STRAIN ENERGY DISTRIBUTION BETWEEN A STATIONARY MAIN CRACK AND ITS PROCESS ZONE , 1998 .

[11]  William A. Curtin,et al.  Crack interaction with microstructure , 2007 .

[12]  Mark Kachanov,et al.  Elastic interaction of a crack with a microcrack array. I - Formulation of the problem and general form of the solution. II - Elastic solution for two crack configurations (piecewise constant and linear approximations) , 1987 .

[13]  L. R. F. Rose,et al.  Microcrack interaction with a main crack , 1986 .

[14]  Mark Kachanov,et al.  A simple technique of stress analysis in elastic solids with many cracks , 1985, International Journal of Fracture.

[15]  Zhuo Zhuang,et al.  Development of X-FEM methodology and study on mixed-mode crack propagation , 2011 .

[16]  V. Tamužs,et al.  A Survey of Macro-Microcrack Interaction Problems , 2000 .

[17]  Z. Zhuang,et al.  A novel enriched CB shell element method for simulating arbitrary crack growth in pipes , 2011 .

[18]  J. D. Embury,et al.  A Treatment of Inelastic Deformation Around a Crack Tip due to Microcracking , 1980 .

[19]  John W. Hutchinson,et al.  Crack tip shielding by micro-cracking in brittle solids , 1987 .

[20]  Mark Kachanov,et al.  Elastic interaction of a crack with a microcrack array—II. Elastic solution for two crack configurations (piecewise constant and linear approximations) , 1987 .

[21]  Zhuo Zhuang,et al.  Equilibrium state of mode-I sub-interfacial crack growth in bi-materials , 2011 .

[22]  T. Belytschko,et al.  A method for multiple crack growth in brittle materials without remeshing , 2004 .

[23]  J. R. Bristow.  Microcracks, and the static and dynamic elastic constants of annealed and heavily cold-worked metals , 1960 .

[24]  R. Hoagland,et al.  Influence of metallurgical factors on the fast fracture energy absorption rates , 1976 .

[25]  A. Evans,et al.  Some effects of microcracks on the mechanical properties of brittle solids—II. Microcrack toughening , 1985 .