Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures

Additive layer manufacturing is growing very fast in various industries such as biomedical, aircraft, and aerospace industries. There is a need for developing simulation tools for predicting transient temperature fields in additive layer manufacturing of three-dimensional (3D) complex parts in these industries. Transient temperature fields in additive manufacturing are critical due to the fact that transient temperatures directly affect residual stresses, microstructure, fatigue life, 3D distortions, and deformations of produced parts. Considering this industrial need, this article introduces a new approach to 3D transient thermal analysis for additive manufacturing for 3D complex industrial structures with freeform features in powder bed systems using laser heat source. Incorporating the features of phase changes, porous media, and temperature-dependent thermal material properties in COMSOL Multiphysics, the developed technique is able to simulate instantaneous transient temperature fields in additive layer manufacturing of 3D complex and freeform structures. Temperature model validations are performed on titanium alloy with the experimental temperature measurements available in the literature. It is observed that the predicted model simulation results agree well with the experimental measurements.

[1]  Rémy Glardon,et al.  Temperature measurements during selective laser sintering of titanium powder , 2004 .

[2]  Fude Wang,et al.  3D finite element temperature field modelling for direct laser fabrication , 2009 .

[3]  Gabriel Bugeda Miguel Cervera,et al.  Numerical prediction of temperature and density distributions in selective laser sintering processes , 1999 .

[4]  K. Mills.  Recommended Values of Thermophysical Properties for Selected Commercial Alloys , 2001 .

[5]  D. Mynors,et al.  A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing , 2009 .

[6]  Bo Song,et al.  Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering , 2012 .

[7]  Evaluation of the thermal field developed during pulsed laser treatments : semi analytical calculation , 1999 .

[8]  Richard M. Everson,et al.  Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting , 2013 .

[9]  K. Osakada,et al.  Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .

[10]  Andrey V. Gusarov,et al.  Mechanisms of selective laser sintering and heat transfer in Ti powder , 2003 .

[11]  Three-dimensional transient finite element analysis of the laser enamelling process and moving heat source and phase change considerations , 2003 .

[12]  Finite Element Simulation of Thermal Distribution in Direct Metal Laser Multi-track Sintering , 2005 .

[13]  J. C. Jaeger.  Moving sources of heat and the temperature at sliding contacts , 1943, Journal and proceedings of the Royal Society of New South Wales.

[14]  Gideon Levy,et al.  The role and future of the Laser Technology in the Additive Manufacturing environment , 2010 .

[15]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[16]  Joel W. Barlow,et al.  The Prediction of the Emissivity and Thermal Conductivity of Powder Beds , 2004 .

[17]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.