Winter and summer performance of single sloped basin type solar still integrated with extended porous fins

Abstract A simple and economical modification for the basin type solar still is proposed. Porous fins made up of blackened old cotton rags were partially dipped in the basin water, while the rest of the part extended above the basin water surface. The extended part of the fins receives most of the solar radiation with minimum shading. The basin water is relatively cooler, thus causing lesser base heat loss. Early morning start-up and higher operating temperatures were reached, giving enhanced heat transfer coefficients and evaporation rate. The basin water primarily acts as a thermal storage which supplements the evaporation process during low insolation, besides giving a reasonable nocturnal output. 56% higher day time distillate and 48% higher for 24 h duration was obtained in the month of February over conventional still, whereas, in the month of May, 23% higher day time and15% higher for 24 h was achieved. A maximum distillate output of about 7.5 kg/m2 was achieved in the month of May in the case of the modified still made of expanded polystyrene foam with good insulation property. The distillate production increases with the decrease in the basin water depth. Experimental results are in fair agreement with that obtained by the thermal model. The modification can also be applied to deep basin type stills.

[1]  A. A. Al-Karaghouli,et al.  An improved solar still: The wick-basin type , 1995 .

[2]  A. E. Kabeel,et al.  Performance of finned and corrugated absorbers solar stills under Egyptian conditions , 2011 .

[3]  P. I. Cooper,et al.  Digital simulation of transient solar still processes , 1969 .

[4]  Rahbar Rahimi,et al.  Modeling and determination of heat transfer coefficient in a basin solar still using CFD , 2011 .

[5]  T. Alwarsamy,et al.  An experimental study on a regenerative solar still with energy storage medium — Jute cloth , 2010 .

[6]  Hiroshi Tanaka,et al.  Experimental study of a basin type solar still with internal and external reflectors in winter , 2009 .

[7]  Ajeet Kumar Rai,et al.  Analytical thermal modeling of double slope solar still by using inner glass cover temperature , 2008 .

[8]  Bilal Akash,et al.  Experimental evaluation of a single-basin solar still using different absorbing materials , 1998 .

[9]  K. M. Eldalil,et al.  Improving the performance of solar still using vibratory harmonic effect , 2010 .

[10]  Ahmed A. Al-Ghamdi,et al.  Thermal performance of a single basin solar still with PCM as a storage medium , 2009 .

[11]  Bassam Abu-Hijleh,et al.  Enhanced solar still performance using water film cooling of the glass cover , 1996 .

[12]  Hiroshi Tanaka,et al.  One step azimuth tracking tilted-wick solar still with a vertical flat plate reflector , 2009 .

[13]  G. N. Tiwari,et al.  Effect of water depths on heat and mass transfer in a passive solar still: in summer climatic condition , 2006 .

[14]  K. Kalidasa Murugavel,et al.  Performance study on basin type double slope solar still with different wick materials and minimum mass of water , 2011 .

[15]  P. Cooper.  The absorption of radiation in solar stills , 1969 .

[16]  K. Srithar,et al.  SINGLE BASIN SOLAR STILL WITH FIN FOR ENHANCING PRODUCTIVITY , 2008 .

[17]  J. W. Bloemer,et al.  Energy balances in solar distillers , 1961 .

[18]  Anil K. Rajvanshi,et al.  Effect of various dyes on solar distillation , 1981 .

[19]  G. Tiwari,et al.  Optimisation of glass cover inclination for maximum yield in a solar still , 1994 .

[20]  Pankaj K. Srivastava,et al.  Experimental and theoretical analysis of single sloped basin type solar still consisting of multiple low thermal inertia floating porous absorbers , 2013 .

[21]  M. Naim,et al.  Non-conventional solar stills Part 2. Non-conventional solar stills with energy storage element , 2003 .

[22]  G. Tiwari,et al.  Simple multiple wick solar still: Analysis and performance , 1981 .

[23]  A. S. Nafey,et al.  SOLAR STILL PRODUCTIVITY ENHANCEMENT , 2001 .

[24]  A. A. El-Sebaii.  Effect of wind speed on some designs of solar stills , 2000 .

[25]  S. C. Mullick,et al.  Estimation of Heat-Transfer Coefficients, the Upward Heat Flow, and Evaporation in a Solar Still , 1991 .

[26]  M. Naim,et al.  Non-conventional solar stills Part 1. Non-conventional solar stills with charcoal particles as absorber medium☆☆☆ , 2003 .

[27]  K Abu-Hijleh,et al.  Experimental study of a solar still with sponge cubes in basin , 2003 .

[28]  G. Tiwari,et al.  Estimation of convective mass transfer in solar distillation systems , 1996 .