Layer-by-layer assembly of polyelectrolytes-wrapped multi-walled carbon nanotubes on long period fiber grating sensors

Abstract A new type of long period fiber grating (LPG) sensor coated with polyelectrolytes-wrapped multi-walled carbon nanotube (MWCNT) (PE-CNT) thin film is reported in this study. The novel nanostructured thin film is deposited on the LPG grating region using a layer-by-layer assembly technique. The aim of using polyelectrolytes (PE) including poly(ethylenimine) (PEI) and poly(acrylic acid) (PAA) in the coating layer is to improve the dispersion of MWCNTs and to enhance the adhesion of functionalized MWCNTs on the LPG surface. The structures and morphologies of the MWCNT-based nanostructured thin film are observed by scanning electron microscopy characterization. The refractive index and pH sensing behaviors of LPGs with pure (PE)10 thin film and with (PE-CNT)10 thin film, respectively are compared. Results show that for LPG with (PE-CNT)10 thin film the transmission intensity at the resonance wavelength decreases noticeably with the increase of the surrounding refractive index. This is distinct from the sensing mechanism of LPG with (PE)10 thin film, which is based on the resonance wavelength shift. The LPG with a (PE-CNT)10 thin film provides enhanced pH sensitivity compared with that of a (PE)10 thin film. The LPG with (PE-CNT)10 thin film has a fast response rate and a good repeatability, thus demonstrating its strong potentiality for practical monitoring applications.

[1]  Yern Seung Kim,et al.  Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers , 2012 .

[2]  Xing Zhong,et al.  Long period fiber grating and high sensitivity refractive index sensor based on hollow eccentric optical fiber , 2013 .

[3]  Shuo Chen,et al.  Layer-by-layer assembly of all carbon nanotube ultrathin films for electrochemical applications. , 2009, Journal of the American Chemical Society.

[4]  Taotao Wu,et al.  Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity , 2014 .

[5]  T. Erdogan,et al.  Leaky cladding mode propagation in long-period fiber grating devices , 1999, IEEE Photonics Technology Letters.

[6]  Francisco J. Arregui,et al.  Response time enhancement of pH sensing films by means of hydrophilic nanostructured coatings , 2007 .

[7]  G. Rivas,et al.  Dispersion of multi-wall carbon nanotubes in polyethylenimine: A new alternative for preparing electrochemical sensors , 2007 .

[8]  Haoshen Zhou,et al.  Poly(acrylic acid)-wrapped multi-walled carbon nanotubes composite solubilization in water: definitive spectroscopic properties , 2006 .

[9]  M. Jablonski,et al.  Laser mode locking using a saturable absorber incorporating carbon nanotubes , 2004, Journal of Lightwave Technology.

[10]  Lin Zhang,et al.  Refractometer probe based on a reflective carbon nanotube-modified microfiber Bragg grating. , 2016, Applied optics.

[11]  Jian-Neng Wang,et al.  Feasibility of Fiber Bragg Grating and Long-Period Fiber Grating Sensors under Different Environmental Conditions , 2010, Sensors.

[12]  Turan Erdogan,et al.  Cladding-mode resonances in short- and long-period fiber grating filters , 2000 .

[13]  J. Garnaes,et al.  Langmuir-Blodgett films. , 1994, Science.

[14]  A. Zhang,et al.  Optical fiber LPG biosensor integrated microfluidic chip for ultrasensitive glucose detection , 2016, Biomedical optics express.

[15]  John E. Sipe,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[16]  R. Smalley,et al.  Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping , 2001 .

[17]  F. Arregui,et al.  Nanofabrication Techniques Applied to the Development of Novel Optical Fiber Sensors Based on Nanostructured Coatings , 2012, IEEE Sensors Journal.

[18]  Shijie Zheng,et al.  Long-period fiber grating moisture sensor with nano-structured coatings for structural health monitoring , 2015 .

[19]  W. D. de Heer,et al.  Carbon Nanotubes--the Route Toward Applications , 2002, Science.

[20]  Salvador Sales,et al.  Simultaneous measurement of humidity and temperature based on a partially coated optical fiber long period grating , 2016 .

[21]  Philippe Lalanne,et al.  Optimization of sensitivity in Long Period Fiber Gratings with overlay deposition. , 2005, Optics Express.

[22]  Layer-by-Layer Assembly for Graphene-Based Multilayer Nanocomposites: Synthesis and Applications , 2015 .

[23]  Yun Wang,et al.  A Review of Carbon Nanotubes-Based Gas Sensors , 2009, J. Sensors.

[24]  Antonello Cutolo,et al.  Alcohol detection using carbon nanotubes acoustic and optical sensors , 2004 .

[25]  Kenneth T. V. Grattan,et al.  Fluorescence based fibre optic pH sensor for the pH 10–13 range suitable for corrosion monitoring in concrete structures , 2014 .

[26]  Gero Decher,et al.  Multilayer Thin Films: Sequential Assembly of Nanocomposite Materials , 2003 .

[27]  P. Hammond,et al.  Nano- and Microporous Layer-by-Layer Assemblies Containing Linear Poly(ethylenimine) and Poly(acrylic acid) , 2008 .

[28]  Alan D. Kersey,et al.  Analysis of the response of long period fiber gratings to external index of refraction , 1998 .

[29]  Qiang Zhao,et al.  Hierarchically structured nanoporous poly(ionic liquid) membranes: facile preparation and application in fiber-optic pH sensing. , 2013, Journal of the American Chemical Society.

[30]  N. Xie,et al.  Durability of steel reinforced concrete in chloride environments: An overview , 2012 .

[31]  S. Asokan,et al.  CO2 sensing at room temperature using carbon nanotubes coated core fiber Bragg grating. , 2013, The Review of scientific instruments.

[32]  Jin Suk Chung,et al.  Fast and simple fabrication of a large transparent chemically-converted graphene film by spray-coating , 2010 .

[33]  Shashi B. Rana,et al.  Study and investigation of long period grating as refractive index sensor , 2014 .

[34]  Francisco J. Arregui,et al.  Optical fiber pH sensor based on lossy-mode resonances by means of thin polymeric coatings , 2011 .

[35]  Venkatesh Mamidala,et al.  Carbon-nanotube-deposited long period fiber grating for continuous refractive index sensor applications , 2014 .

[36]  Lin Zhang,et al.  High-sensitivity refractive index sensor based on large-angle tilted fiber grating with carbon nanotube deposition , 2016, Photonics Europe.

[37]  Ralph P. Tatam,et al.  Fibre optic sensors with nano-structured coatings , 2006 .

[38]  Chuang Wu,et al.  Label-free, disposable fiber-optic biosensors for DNA hybridization detection. , 2013, The Analyst.

[39]  Andrea Cusano,et al.  SWCNT nano-composite optical sensors for VOC and gas trace detection , 2009 .

[40]  I.R. Matias,et al.  Design of pH Sensors in Long-Period Fiber Gratings Using Polymeric Nanocoatings , 2007, IEEE Sensors Journal.

[41]  Hong-Bo Sun,et al.  Nanoporous TiO2/polyion thin-film-coated long-period grating sensors for the direct measurement of low-molecular-weight analytes. , 2012, Langmuir : the ACS journal of surfaces and colloids.