Design and kinematic analysis of an amphibious spherical robot

Nowadays, microrobots are being widely researched in order to deal with complicated missions in limited spaces. But important abilities such as locomotion velocity and enduring time are usually sacrificed in order to realize compact sizes. To solve these problems, we proposed a mother-son multi-robots cooperation system, named GSL system, which included several microrobots as son robots, and a novel designed amphibious spherical robot as the mother robot. The mother robot, which was called GSLMom robot, was designed to be able to carry microrobots and provide power supply for them. This paper will mainly focus on the structure and mechanism of the GSLMom robot. The GSLMom robot, which was designed as an amphibious spherical one, was shaped by a fixed hemisphere hull, and two openable quarter ball hulls. The robot was equipped with a 4 unit locomotion system, and each unit consists of a water jet propeller and two servo motors. Each servo motor could rotate 90° in horizontal or vertical direction respectively. When moving in water, servo motors controlled the directions of water jet propellers and the 4 propellers worked to actuate the robot. With this mechanism, the robot could realize moving forward, backward, rotating, floating and sinking motion in water. In the ground situation, propellers were used as legs, and servo motors actuated these legs to realize walking mechanism, so that the robot could realize moving forward, backward, and rotating motions on the ground. After discussed structures, actuating strategies were proposed for the robot. And kinematic models of the robot were also built.

[1]  Robert Puers,et al.  A wireless power supply system for robotic capsular endoscopes , 2010 .

[2]  Shuxiang Guo,et al.  Development of a Spherical Underwater Robot Equipped with Multiple Vectored Water-Jet-Based Thrusters , 2012, J. Intell. Robotic Syst..

[3]  Shuxiang Guo,et al.  A novel multifunctional underwater microrobot , 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

[4]  Kai Xiao,et al.  A micro-robot fish with embedded SMA wire actuated flexible biomimetic fin , 2008 .

[5]  Shuxiang Guo,et al.  A bio-inspired underwater microrobot with compact structure and multifunctional locomotion , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[6]  Shuxiang Guo,et al.  Development and experiments of a novel multifunctional underwater microrobot , 2010, 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering.

[7]  Shuxiang Guo,et al.  A novel butterfly-inspired underwater microrobot with pectoral fins , 2011, 2011 IEEE International Conference on Mechatronics and Automation.

[8]  Vítor Matos,et al.  Gait transition and modulation in a quadruped robot: A brainstem-like modulation approach , 2011, Robotics Auton. Syst..

[9]  Lynne E. Parker,et al.  Guest editorial advances in multirobot systems , 2002, IEEE Trans. Robotics Autom..

[10]  Shuxiang Guo,et al.  A wireless microrobot with 3 DOFs in pipe for medical applications , 2011, The 2011 IEEE/ICME International Conference on Complex Medical Engineering.

[11]  Jean-Jacques E. Slotine,et al.  The influence of thruster dynamics on underwater vehicle behavior and their incorporation into control system design , 1990 .

[12]  Shuxiang Guo,et al.  A novel hybrid wireless microrobot , 2011, Int. J. Mechatronics Autom..

[13]  Xiufen Ye,et al.  Motion-control analysis of ICPF-actuated underwater biomimetic microrobots , 2011, Int. J. Mechatronics Autom..

[14]  Shuxiang Guo,et al.  A Novel Jellyfish- and Butterfly-Inspired Underwater microrobot with pectoral fins , 2012, Int. J. Robotics Autom..

[15]  Dominique Valentian,et al.  Multi-Channel Hall-Effect Thrusters: Mission Applications and Architecture Trade-Offs , 2007 .

[16]  Wenli Zhou,et al.  Micro ICPF actuators for aqueous sensing and manipulation , 2004 .

[17]  Shuxiang Guo,et al.  Development of a New Jellyfish-Type Underwater Microrobot , 2011, Int. J. Robotics Autom..

[18]  Umesh A. Korde,et al.  Study of a jet-propulsion method for an underwater vehicle , 2004 .

[19]  Pål Liljebäck,et al.  A review on modelling, implementation, and control of snake robots , 2012, Robotics Auton. Syst..

[20]  K. Watanabe.  An AUV Based Experimental System For The Underwater Technology Education , 2006, OCEANS 2006 - Asia Pacific.