Modélisation du temps de cycle d'un système automatisé de stockage/déstockage (AS/RS) multi-allées et à racks glissants

[1]  Russell D. Meller,et al.  AS/RS dwell‐point strategy selection at high system utilization: A simulation study to investigate the magnitude of the benefit , 2005 .

[2]  Ue-Pyng Wen,et al.  The impact on rack configuration on the speed profile of the storage and retrieval machine , 1997 .

[3]  Mitsuo Gen,et al.  An integrated model for the design of end-of-aisle order picking system and the determination of unit load sizes of AGVs , 2002 .

[4]  Hark Hwang,et al.  Travel-time models considering the operating characteristics of the storage and retrieval machine , 1990 .

[5]  Wen-Jing Hsu,et al.  Travel time analysis of a new automated storage and retrieval system , 2005, Comput. Oper. Res..

[6]  Wen-tsao Wang.  Evaluation of scheduling rules for single- and dual-dock automated storage , 1989 .

[7]  Joon-Mook Lim,et al.  Deriving an optimal dwell point of the storage/retrieval machine in an automated storage/retrieval system , 1993 .

[8]  M. Brandeau,et al.  Note. Optimal Storage Assignment Policies for Automated Storage and Retrieval Systems with Stochastic Demands , 1998 .

[9]  Gino Marchet,et al.  Layout design in manual picking systems: a simulation approach , 2000 .

[10]  Stephen C. Graves,et al.  Optimal Storage Assignment in Automatic Warehousing Systems , 1976 .

[11]  Jeffrey S. Smith,et al.  Closed form models for determining the optimal dwell point location in automated storage and retrieval systems , 1996 .

[12]  SUK-HWA CHANG,et al.  Relative pre-positioning of storage/retrieval machines in automated storage/retrieval systems to minimize maximum system response time , 1997 .

[13]  Charles J. Malmborg.  Rule of thumb heuristics for configuring storage racks in automated storage and retrieval systems design , 2001 .

[14]  Byung Chun Park,et al.  Optimal dwell point policies for automated storage/retrieval systems with dedicated storage , 1999 .

[15]  Meir J. Rosenblatt,et al.  Warehouse design with storage policy considerations , 1984 .

[16]  Zhi-Long Chen,et al.  Scheduling of depalletizing and truck loading operations in a food distribution system , 2003 .

[17]  Charles J. Malmborg,et al.  A revised proof of optimality for the cube-per-order index rule for stored item location , 1990 .

[18]  Edward D. McDowell,et al.  Optimal Product Layout in an Order Picking Warehouse , 1991 .

[19]  Bhaba R. Sarker,et al.  Travel time models in automated storage/retrieval systems: A critical review , 1995 .

[20]  R. (M.) B. M. de Koster,et al.  Optimal storage rack design for a 3-dimensional compact AS/RS , 2005 .

[21]  C.-H. Wang,et al.  A framework for the dual command cycle travel time model in automated warehousing systems , 1996 .

[22]  Edward H. Frazelle,et al.  Analytical Results for Miniload Throughput and the Distribution of Dual Command Travel Time , 1991 .

[23]  R. Meller,et al.  Multi-shuttle automated storage/retrieval systems , 1997 .

[24]  Richard A. Wysk,et al.  An Analysis Of Control Strategies For An Automated Storage/Retrieval System , 1987 .

[25]  Min-Hong Han,et al.  Performance evaluation of a double shuttle automated storage and retrieval system , 1991 .

[26]  Sun Hur,et al.  Optimal design of rack structure with modular cell in AS/RS , 2005 .

[27]  James T. Lin,et al.  The impact of acceleration/deceleration on travel-time models for automated storage/retrieval systems , 1995 .

[28]  D. Van Oudheusden,et al.  Storage layout of AS/RS racks based on recurrent orders , 1992 .

[29]  Loon Ching Tang,et al.  Travel time analysis for general item location assignment in a rectangular warehouse , 1999, Eur. J. Oper. Res..

[30]  Dennis B. Webster,et al.  Modelling of three-dimensional warehouse systems , 1989 .

[31]  J. M. A. Tanchoco,et al.  Performance estimation models for AS/RS with unequal sized cells , 1999 .

[32]  Yavuz A. Bozer,et al.  Geometric Approaches to Solve the Chebyshev Traveling Salesman Problem , 1990 .

[33]  Ue-Pyng Wen,et al.  The impact of acceleration/deceleration on travel-time models in class-based automated S/R systems , 2001 .

[34]  Tho Le-Duc,et al.  Travel time estimation and order batching in a 2-block warehouse , 2007, Eur. J. Oper. Res..

[35]  Yavuz A. Bozer,et al.  A generalized design and performance analysis model for end-of-aisle order-picking systems , 1996 .

[36]  Gajendra Kumar Adil,et al.  A branch and bound algorithm for class based storage location assignment , 2008, Eur. J. Oper. Res..

[37]  Randall P. Sadowski,et al.  Introduction to Simulation Using Siman , 1990 .

[38]  Sabah U. Randhawa,et al.  Simulation-based design evaluation of unit load automated storage/retrieval systems , 1995 .

[39]  Noureddine Ghouali,et al.  Travel-time models for flow-rack automated storage and retrieval systems , 2005 .

[40]  Stephen C. Graves,et al.  Scheduling Policies for Automatic Warehousing Systems: Simulation Results , 1978 .

[41]  Meir J. Rosenblatt,et al.  ESTABLISHING ZONES IN SINGLE-COMMAND CLASS-BASED RECTANGULAR AS/RS , 1994 .

[42]  Byung Chun Park,et al.  An optimal dwell point policy for automated storage/retrieval systems with uniformly distributed, rectangular racks , 2001 .

[43]  Hark Hwang,et al.  Class-based storage assignment policy in carousel system , 1994 .

[44]  Jeroen P. van den Berg,et al.  Simulation study of an automated storage/retrieval system , 2000 .

[45]  Lamia Berrah.  Une approche d'évaluation de la performance industrielle : modèle d'indicateurs et techniques floues pour un pilotage réactif , 1997 .

[46]  Rajat Roy,et al.  Modelling and analysis of manufacturing systems: Ronald G. Askin and Charles R. Standridge John Wiley & Sons Chichester (1993) xvi + 461 pp £16.95 ISBN 0 471 57369 8 , 1994 .

[47]  Stephen C. Graves,et al.  Storage-Retrieval Interleaving in Automatic Warehousing Systems , 1977 .

[48]  Pius J. Egbelu,et al.  A comparison of dwell point rules in an automated storage/retrieval system , 1993 .

[49]  Thom J. Hodgson,et al.  A Combined Approach to the Pallet Loading Problem , 1982 .

[50]  Yavuz A. Bozer,et al.  Travel-Time Models for Automated Storage/Retrieval Systems , 1984 .

[51]  Tho Le-Duc,et al.  Travel distance estimation and storage zone optimization in a 2-block class-based storage strategy warehouse , 2005 .

[52]  F. Eldemir,et al.  New cycle time and space estimation models for automated storage and retrieval system conceptualization , 2004 .

[53]  R.M.J. Heuts,et al.  A geometrical approach to computing expected cycle times for zonebased storage layouts in AS/RS , 2002 .

[54]  Sun Hur,et al.  A performance estimation model for AS/RS by M/G/1 queuing system , 2004, Comput. Ind. Eng..

[55]  Charles J. Malmborg,et al.  Design models for unit load storage and retrieval systems using autonomous vehicle technology and resource conserving storage and dwell point policies , 2007 .

[56]  Stewart V. Hoover,et al.  An optimum-seeking approach to the design of automated storage/retrieval systems , 1984, WSC '84.

[57]  Gino Marchet,et al.  Optimal layout in low-level picker-to-part systems , 2000 .

[58]  Sethuraman Raghunath,et al.  Interactive simulation modeling of automated storage retrieval systems , 1986, WSC '86.

[59]  Janez Kramberger,et al.  Simulation model of multi-shuttle automated storage and retrieval systems , 2004 .

[60]  Richard J. Linn,et al.  An expert system based controller for an automated storage/retrieval system , 1990 .