Physico-mechanical properties of thermally modified Eucalyptus nitens wood for decking applications

Eucalyptus nitens is a fast growing plantation species that has a good acclimation in Spain and Chile. At the moment it is mainly used for pulp and paper production, but there is a growing market for solid wood products made from this species. Thermal modification offers a good alternative to produce high quality material to manufacture products with high added value. This study used unmodified and thermally modified E. nitens wood from Spanish and Chilean plantations to elaborate external decking and examine if it complies with the necessary properties to be a competitive product. A process similar to ThermoWood® was applied at the following temperatures: 185 °C, 200 °C and 215 °C. For each modification and for an unmodified specimen mass loss, volumetric swelling, anti-swelling efficiency (ASE) and equilibrium moisture content (EMC) were determined. Brinell hardness, dynamic hardness, screw and nail withdrawal resistance, and abrasion resistance according to the Shaker method and the Taber Abraser method were also determined. According to this study, thermally modified E. nitens from both countries showed high potential to be used as decking material, particularly when modified at 200 °C.

[1]  H. Militz,et al.  Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems , 2019 .

[2]  H. Pereira,et al.  Natural durability assessment of thermo-modified young wood of eucalyptus , 2018 .

[3]  C. Álvarez,et al.  Mechanical properties: wood lumber versus plastic lumber and thermoplastic composites , 2017 .

[4]  B. D. Mattos,et al.  Effect of thermal treatments on technological properties of wood from two Eucalyptus species. , 2015, Anais da Academia Brasileira de Ciencias.

[5]  G. Gunduz,et al.  Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws , 2015 .

[6]  Wang Xuehua,et al.  Effect of vacuum heat treatment temperature on physical and mechanical properties of Eucalyptus pellita wood , 2014 .

[7]  C. Brischke,et al.  Testing the mechanical resistance of timber used for construction in the marine environment , 2014 .

[8]  A. Ballarin,et al.  Physical and mechanical properties of thermally modified wood from E. grandis , 2011, European Journal of Wood and Wood Products.

[9]  C. Brischke,et al.  Dynamic and static hardness of wood: method development and comparative studies , 2011 .

[10]  E. T. Choong,et al.  Effect of Extractives on Moisture Sorption and Shrinkage in Tropical Woods , 2010 .

[11]  Helena Pereira,et al.  Wood modification by heat treatment: a review. , 2009 .

[12]  H. Militz.  Processes and Properties of Thermally Modified Wood Manufactured in Europe , 2008 .

[13]  Vjekoslav Živković,et al.  Dimensional stability of heat treated wood floorings , 2007 .

[14]  B. Esteves.  Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200ºC , 2007 .

[15]  Yukie Saito,et al.  Effects of heat treatment on brittleness of Styrax tonkinensis wood , 2007, Journal of Wood Science.

[16]  H. Pereira,et al.  Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood , 2007, Wood Science and Technology.

[17]  Mohamed Bouazara,et al.  Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera) , 2006, Wood Science and Technology.

[18]  C. Hill,et al.  Wood Modification: Chemical, Thermal and Other Processes , 2006 .

[19]  P. Viitaniemi,et al.  The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C , 2006, Holz als Roh- und Werkstoff.

[20]  T. Okano,et al.  Bending strength and toughness of heat-treated wood , 2000, Journal of Wood Science.

[21]  A. Stamm,et al.  Minimizing wood shrinkage and swelling : effect of heating in various gases , 1937 .