Strategies to Improve Bioactivity of Hydroxyapatite Bone Scaffolds

Two different approaches are proposed in this study to enhance the bioactivity of hydroxyapatite-based scaffolds for bone tissue regeneration. The first method consists in a structural modification of Hydroxyapatite (HA) through doping it with Magnesium (1,3% wt) while the second one in using HA in combination with a calcium silicate, i.e. Wollastonite (WS), to form a composite bioceramic. Scaffolds with high and strongly interconnected porosity (pores ranging from 300 to 800 µm) were produced throughout both procedures. Higher mechanical properties in compression were obtained when the composite Ws/HA bioceramic was adopted. That one showed a weight loss after 6 months in physiological solution seven times higher than doped HA. Preliminary in vitro tests highlighted that both kinds of scaffold allowed the adhesion of MG63, without significant differences in terms of vitality, indicating a good biocompatibility of both used biomaterials.

[1]  A. Sannino,et al.  Mechanical stability of highly porous hydroxyapatite scaffolds during different stages of in vitro studies , 2016 .

[2]  Mohammad Hamdan Alkhraisat,et al.  Magnesium substitution in brushite cements for enhanced bone tissue regeneration. , 2014, Materials science & engineering. C, Materials for biological applications.

[3]  N. Osman,et al.  Magnesium incorporated hydroxyapatite: Synthesis and structural properties characterization , 2014 .

[4]  R. Othman,et al.  Carbonate Hydroxyapatite and Silicon-Substituted Carbonate Hydroxyapatite: Synthesis, Mechanical Properties, and Solubility Evaluations , 2014, TheScientificWorldJournal.

[5]  A. Sannino,et al.  Influence of the calcination temperature on morphological and mechanical properties of highly porous hydroxyapatite scaffolds , 2013 .

[6]  A. Sannino,et al.  High-Performance Hydroxyapatite Scaffolds for Bone Tissue Engineering Applications , 2012 .

[7]  I. Mihailescu,et al.  Magnesium and strontium doped octacalcium phosphate thin films by matrix assisted pulsed laser evaporation. , 2012, Journal of inorganic biochemistry.

[8]  A. Bigi,et al.  Effect of Mg(2+), Sr(2+), and Mn(2+) on the chemico-physical and in vitro biological properties of calcium phosphate biomimetic coatings. , 2009, Journal of inorganic biochemistry.

[9]  C. Rey,et al.  Surface enrichment of biomimetic apatites with biologically-active ions Mg2+ and Sr2+: A preamble to the activation of bone repair materials , 2008 .

[10]  M. Sayer,et al.  Silicon substitution in the calcium phosphate bioceramics. , 2007, Biomaterials.

[11]  Y. Kameshima,et al.  Comparative study of apatite formation on CaSiO3 ceramics in simulated body fluids with different carbonate concentrations , 2005, Journal of materials science. Materials in medicine.

[12]  P. Chu,et al.  Mechanism of apatite formation on wollastonite coatings in simulated body fluids. , 2004, Biomaterials.

[13]  RM Wilson,et al.  APATITE STRUCTURES , 2001 .