Discrete particle motion on sieves—a numerical study using the DEM simulation

This paper presents a mathematical investigation of particulate motion on an inclined screening chute using the Discrete Element Method (DEM). Special attention has been paid to the implementation of an apertured boundary and the algorithm for allowing particles to pass through apertures or to rebound when approaching the screen surface. Computational experiments have been conducted to examine the undersize particle motion across the material layer and through the apertures for bimodal mixtures comprising two different sizes of spherical polyethylene pellets. Discrete particle motion at different regions along the screen has been discussed in relation to the physical mechanisms inherent in the solids separation process and their determinative role on screening efficiency. Simulations have demonstrated the negative effect of near-mesh size particles and the positive role of relatively large particles on screening operations and the crucial effect of particle segregation in material layers. Comparison of screening rate along the screen with experiments has demonstrated adequate agreement. This computational study has shown the advantages of using DEM to understand the complex solids separation process. Further works are envisaged to focus on the development of advanced experimental techniques and the implementation of DEM for sieving processes involving moving screens.

[1]  G.K.N.S. Subasinghe,et al.  Modelling the screening process: A probabilistic approach , 1989 .

[2]  Gisle G. Enstad,et al.  Segregation of Particulate Materials – Mechanisms and Testers , 1996 .

[3]  P. B. Linkson,et al.  Batch sieving of deep particulate beds on a vibratory sieve , 1969 .

[4]  Israel J. Lin,et al.  Efficiency of solid particle screening as a function of screen slot size, particle size, and duration of screening. The theoretical approach , 1998 .

[5]  Jonathan Seville,et al.  Processing of Particulate Solids , 1997 .

[6]  E. G. Kelly,et al.  Introduction to Mineral Processing , 1982 .

[7]  Julio M. Ottino,et al.  Computational studies of granular mixing , 2000 .

[8]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[9]  B. H. Kaye.  INVESTIGATION INTO THE POSSIBILITIES OF DEVELOPING A RATE METHOD OF SIEVE ANALYSIS , 1962 .

[10]  Colin Thornton,et al.  Impact of elastic spheres with and without adhesion , 1991 .

[11]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[12]  N. Standish,et al.  Some kinetic aspects of continuous screening , 1985 .

[13]  J. Williams,et al.  The segregation of particulate materials. A review , 1976 .

[14]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[15]  N. Standish.  The kinetics of batch sieving , 1985 .

[16]  D. Mason,et al.  A computational investigation of transient heat transfer in pneumatic transport of granular particles , 2000 .

[17]  V. N. Dolgunin,et al.  Segregation modeling of particle rapid gravity flow , 1995 .

[18]  Brian H. Kaye,et al.  An algorithm for deducing an effective sieve residue from the rate of powder passage through a sieve , 1979 .

[19]  M. L. Jansen,et al.  The size separation of particles by screening , 1968 .

[20]  Th. Frank,et al.  NUMERICAL SIMULATION AND EXPERIMENTAL INVESTIGATION OF A GAS-SOLID TWO-PHASE FLOW IN A HORIZONTAL CHANNEL , 1993 .

[21]  N. Standish,et al.  A study of the effect of operating variables on the efficiency of a vibrating screen , 1986 .