On the processing and morphological aspects of metal fibers based on low-speed multi-tooth dry cutting

[1]  Jun Zhao,et al.  Surface roughness and chip formation in high-speed face milling AISI H13 steel , 2012 .

[2]  Characterization of chip formation during machining 1045 steel , 2012 .

[3]  Onur Çoban,et al.  A review: Fibre metal laminates, background, bonding types and applied test methods , 2011 .

[4]  Yong Tang,et al.  Fabrication and Characterization of Aluminum Fibers by Peripheral Milling , 2010 .

[5]  Wei Yuan,et al.  Feasibility study of porous copper fiber sintered felt: A novel porous flow field in proton exchange membrane fuel cells , 2010 .

[6]  N. Tsuji,et al.  Change in microstructures and mechanical properties during deep wire drawing of copper , 2010 .

[7]  Wei Zhou,et al.  An Innovative Fabrication Process of Porous Metal Fiber Sintered Felts with Three-Dimensional Reticulated Structure , 2010 .

[8]  S. Edwardson,et al.  Towards a rapid, non-contact shaping method for fibre metal laminates using a laser source , 2010 .

[9]  Yong Tang,et al.  Porous copper fiber sintered felts: An innovative catalyst support of methanol steam reformer for hydrogen production , 2008 .

[10]  G. Byrne,et al.  Dynamics of chip formation during orthogonal cutting of titanium alloy Ti–6Al–4V , 2008 .

[11]  Yong Tang,et al.  Preparation of oriented linear copper fiber sintered felt and its performance , 2007 .

[12]  Z. Wan,et al.  High efficient production of slim long metal fibers using bifurcating chip cutting , 2007 .

[13]  P. Chevrier,et al.  Metallurgical study on chips obtained by high speed machining of a Ti–6 wt.%Al–4 wt.%V alloy , 2007 .

[14]  N. Nomura,et al.  Microstructure and mechanical properties of biomedical Co–29Cr–8Mo alloy wire fabricated by a modified melt-spinning process , 2007 .

[15]  Won Jong Choi,et al.  Spring-back characteristics of fiber metal laminate (GLARE) in brake forming process , 2007 .

[16]  R. Gong,et al.  Electromagnetic properties of Fe55Ni45 fiber fabricated by magnetic-field-induced thermal decomposition , 2005 .

[17]  F. Topin,et al.  About the use of fibrous materials in compact heat exchangers , 2004 .

[18]  Wangyu Liu,et al.  Production of long metal fibers using a combined method of microsaw turning and pulling , 2003 .

[19]  T. Nakagawa,et al.  On Fiber Sticking Phenomenon in Coiled Sheet Shaving for Metal Fiber Production , 1995 .

[20]  T. Nakagawa,et al.  Production of short length steel fibre for composite material on a milling machine , 1980 .