Novel, nanoporous silica and titania layers fabricated by magnetron sputtering.

Composite asymmetric membranes are fabricated through the deposition of submicrometer thick (100 nm) silica (SiO(2)) and titania (TiO(2)) films onto flat nanoporous silica and zirconia substrates by magnetron sputtering. The deposition conditions for both coating types were systematically altered to determine their influence on the deposited coating morphology and thickness. Ideal He/N(2) gas selectivity was measured for all of the membranes. The TiO(2) coatings, when deposited onto a ZrO(2) support layer with a pore size of 3 nm, formed a long columnar grain structure with average column diameter of 38 nm. A similar columnar structure was observed for TiO(2) coatings deposited onto a SiO(2) support layer with a pore size of 1 nm. Under the same conditions, SiO(2) coatings, deposited onto the same SiO(2) supports, formed a closely packed spherical grain structure whereas, when deposited onto ZrO(2) supports, the SiO(2) coatings formed an open grain structure. The average SiO(2) grain diameter was 36 nm in both cases. This preliminary investigation was aimed at studying the effect of sputtering parameters on the density and morphology of the deposited coatings. For the depositions carried out, the coating material was found to be very dense. However, the presence of grain boundaries resulted in poor ideal He/N(2) separation efficiencies.

[1]  G. Marin,et al.  Photocatalytic activity of dc magnetron sputter deposited amorphous TiO2 thin films , 2007 .

[2]  R. E. Cunningham,et al.  Diffusion in Gases and Porous Media , 1980 .

[3]  S. Oyama,et al.  Hydrothermally stable silica–alumina composite membranes for hydrogen separation , 2008 .

[4]  M. Stamate.  Dielectric properties of TiO2 thin films deposited by a DC magnetron sputtering system , 2000 .

[5]  P. Kelly,et al.  A comparison of the properties of titanium-based films produced by pulsed and continuous DC magnetron sputtering , 2003 .

[6]  Damian A. Mooney,et al.  The development of nanoporous membranes for separation of carbon dioxide at high temperatures , 2006 .

[7]  Y. Gogotsi,et al.  Carbide-derived carbon membrane , 2008 .

[8]  Wen-Fa Wu,et al.  Properties of radio frequency magnetron sputtered silicon dioxide films , 1996 .

[9]  Harold Gamble,et al.  Thin film sputtered silicon for silicon wafer bonding applications , 2003 .

[10]  R. Bredesen,et al.  Microstructural characterization of self-supported 1.6 μm Pd/Ag membranes , 2008 .

[11]  Yuehe Lin,et al.  Synthesis and hydrogen permeation properties of ultrathin palladium-silver alloy membranes , 1995 .

[12]  X. Portier,et al.  An original approach for the fabrication of Si/SiO2 multilayers using reactive magnetron sputtering , 2002 .

[13]  J. MacElroy.  Molecular simulation of the kinetic selectivity of a model silica system , 2002 .

[14]  Yong Sun,et al.  Effect of thermal oxidation conditions on tribological behaviour of titanium films on 316L stainless steel , 2005 .

[15]  M. Wuttig,et al.  Properties of TiOx coatings prepared by dc magnetron sputtering , 2003 .

[16]  Eduard Llobet,et al.  Anodic formation of low-aspect-ratio porous alumina films for metal-oxide sensor application , 2006 .

[17]  Yuehe Lin,et al.  MICROPOROUS INORGANIC MEMBRANES , 2000 .

[18]  Feng Chen,et al.  Growth of nanoporous silicon dioxide thin films using porous alumina substrates , 2008 .

[19]  G. Lucovsky,et al.  Chemical states study of Si in SiOx films grown by PECVD , 1986 .

[20]  R. Dittmeyer,et al.  Preparation of thin palladium membranes on a porous support with rough surface , 2007 .

[21]  D. Teeters,et al.  Formation and characterization of SnO2 nanobaskets , 2006 .

[22]  D. J. Christie,et al.  Control of reactive sputtering processes , 2005 .

[23]  C. Andreazza-Vignolle,et al.  Pd nanoclusters grown by plasma sputtering deposition on amorphous substrates , 2000 .

[24]  W. Tao,et al.  Optical properties of tungsten and titanium oxide thin films prepared by plasma sputter deposition , 2004 .

[25]  A. Nakao,et al.  Ferroelectric nanostructures sputtered on alumina membranes , 2004 .

[26]  Y. S. Lin,et al.  Novel molecular sieve silica (MSS) membranes: characterisation and permeation of single-step and two-step sol–gel membranes , 2002 .

[27]  Dongyan Ding,et al.  Hydrogen sensing of nanoporous palladium films supported by anodic aluminum oxides , 2006 .

[28]  Francis Levy,et al.  Electrical and optical properties of TiO2 anatase thin films , 1994 .

[29]  Olav Bolland,et al.  High-temperature membranes in power generation with CO2 capture , 2004 .

[30]  Ivan Turkevych,et al.  Photocatalytic properties of titanium dioxide sputtered on a nanostructured substrate , 2008 .

[31]  M. Kiuchi,et al.  Structural and optical properties of titanium dioxide films deposited by reactive magnetron sputtering in pure oxygen plasma , 2004 .