Measurement of the strength and range of adhesion using atomic force microscopy

Abstract Adhesion of nanoscale contacts is important in many applications, including microelectromechanical systems, fibrillar adhesives, and atomic force microscopy (AFM). Here, we quantify the properties of the adhesive traction–separation relation between ultrananocrystalline diamond (UNCD) AFM tips and polymethyl methacrylate (PMMA) surfaces using a novel AFM-based method that combines pull-off force measurements and characterization of the 3D geometry of the AFM tip. Three AFM tips with different nanoscale geometries were characterized and used to perform pull-off force measurements. Using the pull-off force data, the measured 3D tip geometries, and an assumed form of the traction–separation relation, specifically the Dugdale or 3-9 Lennard-Jones relations, the range, strength, and work of adhesion of the UNCD–PMMA contact were determined. The assumptions in the analyses were validated via finite element modeling. Both forms of the traction–separation laws result in a work of adhesion of approximately 50 mJ/m 2 and the peak adhesive stress in the Lennard Jones relation is found to be about 50% higher than that obtained for the Dugdale law.

[1]  J. Villarrubia.  Algorithms for Scanned Probe Microscope Image Simulation, Surface Reconstruction, and Tip Estimation , 1997, Journal of research of the National Institute of Standards and Technology.

[2]  A. Polycarpou,et al.  Adhesive contact based on the Lennard-Jones potential: a correction to the value of the equilibrium distance as used in the potential. , 2004, Journal of colloid and interface science.

[3]  Yong Zhu,et al.  Measuring graphene adhesion using atomic force microscopy with a microsphere tip. , 2015, Nanoscale.

[4]  N. Spencer,et al.  Controlling adhesion force by means of nanoscale surface roughness. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[5]  B. V. Derjaguin,et al.  Effect of contact deformations on the adhesion of particles , 1975 .

[6]  R. Cingolani,et al.  Nanopatterning of colloidal nanocrystals emitters dispersed in a PMMA matrix by e-beam lithography , 2006 .

[7]  B. Guo,et al.  AFM tip hammering nanolithography. , 2009, Small.

[8]  Kevin T Turner,et al.  Method for characterizing nanoscale wear of atomic force microscope tips. , 2010, ACS nano.

[9]  K. Turner,et al.  Adhesion of nanoscale asperities with power-law profiles , 2013 .

[10]  I. Szlufarska,et al.  Recent advances in single-asperity nanotribology , 2008 .

[11]  Philippe Dubois,et al.  Probe‐Based 3‐D Nanolithography Using Self‐Amplified Depolymerization Polymers , 2010, Advanced materials.

[12]  Adhesion between weakly rough beads. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[13]  D. Maugis.  Adhesion of spheres : the JKR-DMT transition using a dugdale model , 1992 .

[14]  B. Derjaguin,et al.  On the influence of molecular forces on the deformation of an elastic sphere and its sticking to a rigid plane , 1980 .

[15]  O. Auciello,et al.  Surface chemistry and bonding configuration of ultrananocrystalline diamond surfaces and their effects on nanotribological properties , 2007 .

[16]  Bharat Bhushan,et al.  Micro/nanotribological characterization of PDMS and PMMA used for BioMEMS/NEMS applications , 2005 .

[17]  Robert W. Carpick,et al.  Accounting for the JKR–DMT transition in adhesion and friction measurements with atomic force microscopy , 2005 .

[18]  K. Kendall,et al.  Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[19]  Joel Fried,et al.  Polymer Science and Technology , 1995 .

[20]  Xavier Borrisé,et al.  Nanolithography on thin layers of PMMA using atomic force microscopy , 2005 .

[21]  J. A. Greenwood,et al.  Adhesion of elastic spheres , 1997, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[22]  K. Turner,et al.  The Effect of Atomic-Scale Roughness on the Adhesion of Nanoscale Asperities: A Combined Simulation and Experimental Investigation , 2013, Tribology Letters.

[23]  M. Ayatollahi,et al.  Investigation of mechanical and tribological properties of bone cement by nano-indentation and nano-scratch experiments , 2012 .

[24]  W.J. Li,et al.  A PMMA-based micro pressure sensor chip using carbon nanotubes as sensing elements , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[25]  Nanocomposites of poly(methyl methacrylate) (PMMA) and montmorillonite (MMT) Brazilian clay: A tribological study , 2010 .

[26]  J. Israelachvili.  Intermolecular and surface forces , 1985 .

[27]  N. Miki,et al.  Effect of nanoscale surface roughness on the bonding energy of direct-bonded silicon wafers , 2003 .

[28]  Kevin T Turner,et al.  Atomic-scale wear of amorphous hydrogenated carbon during intermittent contact: a combined study using experiment, simulation, and theory. , 2014, ACS nano.

[29]  T. Jacobs,et al.  Measurement of the Length and Strength of Adhesive Interactions in a Nanoscale Silicon–Diamond Interface , 2015 .

[30]  Ş. Şen,et al.  Friction and wear behavior of zirconium oxide reinforced PMMA composites , 2014 .

[31]  J. Notbohm,et al.  Preventing nanoscale wear of atomic force microscopy tips through the use of monolithic ultrananocrystalline diamond probes. , 2010, Small.

[32]  J. Bechhoefer,et al.  Calibration of atomic‐force microscope tips , 1993 .

[33]  Mingji Wang,et al.  Nanoindentation of polymeric thin films with an interfacial force microscope , 2004 .

[34]  A. Plößl.  Wafer direct bonding: tailoring adhesion between brittle materials , 1999 .

[35]  Johnson,et al.  An Adhesion Map for the Contact of Elastic Spheres , 1997, Journal of colloid and interface science.

[36]  I. Lin,et al.  E-beam lithography and electrodeposition fabrication of thick nanostructured devices , 2007 .