Adaptive quasi-Monte Carlo method for uncertainty evaluation in centroid measurement of planetary rovers

The measurement of the centroid is of great significance to improve the control performance and reduce the energy consumption of the planetary rover (PR). The uncertainty is an essential indicator ...

[1]  Robert F. Tichy,et al.  Quasi-Monte Carlo Methods for Numerical Integration: Comparison of Different Low Discrepancy Sequences , 1996, Monte Carlo Methods Appl..

[2]  D. Theodorou,et al.  Coverage interval estimation of the measurement of Gross Heat of Combustion of fuel by bomb calorimetry: Comparison of ISO GUM and adaptive Monte Carlo method , 2011 .

[3]  S. Bürger,et al.  Implementation of Guide to the Expression of Uncertainty in Measurement (GUM) to Multi-Collector TIMS Uranium Isotope Ratio Metrology , 2010 .

[4]  J. M. Sek,et al.  On the L2-discrepancy for anchored boxes , 1998 .

[5]  G. Wimmer,et al.  Brief overview of methods for measurement uncertainty analysis: GUM uncertainty framework, Monte Carlo method, characteristic function approach , 2017, 2017 11th International Conference on Measurement.

[6]  P. Glasserman,et al.  Monte Carlo methods for security pricing , 1997 .

[7]  Jirí Matousek,et al.  On the L2-Discrepancy for Anchored Boxes , 1998, J. Complex..

[8]  J. Ocaña,et al.  Uncertainty analysis for non-uniform residual stresses determined by the hole drilling strain gauge method , 2017 .

[9]  Liu Ting,et al.  Method for Measurement Uncertainty Evaluation of Cylindricity Error Based on Good Point Set , 2018 .

[10]  Xiulan Wen,et al.  Adaptive Monte Carlo and GUM methods for the evaluation of measurement uncertainty of cylindricity error , 2013 .

[11]  Harald Niederreiter,et al.  3. Low-Discrepancy Point Sets and Sequences , 1992 .

[12]  R P B Costa-Félix,et al.  Monte Carlo uncertainty assessment of ultrasonic beam parameters from immersion transducers used to non-destructive testing. , 2016, Ultrasonics.

[13]  Giovanni Maizza,et al.  Measurement of elastic modulus by instrumented indentation in the macro-range: Uncertainty evaluation , 2015 .

[14]  Kruno Miličević,et al.  Measurement uncertainty of transmission line resistance calculation using ‘Guide to the Expression of Uncertainty in Measurement’ and adaptive Monte–Carlo method , 2017 .

[16]  Aiguo Song,et al.  Measurement uncertainty evaluation of conicity error inspected on CMM , 2015, Chinese Journal of Mechanical Engineering.

[17]  W. J. Whiten,et al.  Computational investigations of low-discrepancy sequences , 1997, TOMS.

[18]  Janko Hodolic,et al.  Different Approaches in Uncertainty Evaluation for Measurement of Complex Surfaces Using Coordinate Measuring Machine , 2015 .

[19]  Li Bo,et al.  Centroid Measurement Method and Experimental Study of Multi-configuration Planetary Rover , 2019 .

[20]  Ding Xiaohong,et al.  Measurement uncertainty evaluation in whiplash test model via neural network and support vector machine-based Monte Carlo method , 2018 .

[21]  Stefan Heinrich,et al.  Efficient algorithms for computing the L2-discrepancy , 1996, Math. Comput..

[22]  M. E. Muller,et al.  A Note on the Generation of Random Normal Deviates , 1958 .

[23]  JCGM 102 : 2011 Evaluation of measurement data – Supplement 2 to the “ Guide to the expression of uncertainty in measurement ” – Extension to any number of output quantities , 2011 .

[24]  R. B. D. Bettencourt da Silva,et al.  Standard addition method with cumulative additions: Monte Carlo uncertainty evaluation. , 2019, Analytica chimica acta.

[25]  Liming Li.  Quasi-Monte Carlo Simulation Methods for Measurement Uncertainty , 2000 .

[26]  H. Ramebäck,et al.  Uncertainty evaluation in gamma spectrometric measurements: Uncertainty propagation versus Monte Carlo simulation. , 2018, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[27]  W. Kessel,et al.  Measurement uncertainty according to ISO/BIPM-GUM , 2002 .

[28]  T. Kowaluk,et al.  Proposed Use of Monte Carlo Simulated Images to Evaluate the Accuracy of Measurements on X-Ray Computed Tomography , 2018, Measurement Science Review.

[29]  Harish Kumar,et al.  Evaluation of uncertainty of measurement of shadow mask dot pitch using different approaches , 2018, Trans. Inst. Meas. Control.

[30]  K. Tomczyk.  Influence of Monte Carlo generations applied for modelling of measuring instruments on maximum distance error , 2019, Trans. Inst. Meas. Control.

[31]  I. Sobol.  On the distribution of points in a cube and the approximate evaluation of integrals , 1967 .

[32]  J.R.R. Mayer,et al.  Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior , 2018, Precision Engineering.

[33]  Bing Kuang,et al.  Evaluation of measurement uncertainty based on quasi-Monte-Carlo method in the large diameter measurement , 2012 .

[34]  E. Iso,et al.  Measurement Uncertainty and Probability: Guide to the Expression of Uncertainty in Measurement , 1995 .

[35]  Yuan Li,et al.  Uncertainty Evaluation Study of CMM Dynamic Measurement Based on Quasi Monte Carlo Method , 2011 .