Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)

Incorporating Phase Change Materials (PCMs) into traditional building structures has been considered as an effective way to reduce the mismatch between energy supply and demand and in turn to minimise energy consumption (cooling/heating energy). For building applications, Phase Change Material Wallboards (PCMWs) are of particular interest due to their easy installation to existing buildings for refurbishment. Both interior and exterior PCMWs are investigated in this paper, with a numerical study examining the effects of wallboard thermal properties on its thermal performance. These influencing factors include melting temperature, melting range, latent heat, thermal conductivity and surface heat transfer coefficient. An effective heat capacity model is adopted to consider latent heat with the model validated by an experiment. Inner surface temperature and diurnal energy storage are chosen as the evaluation criteria when comparing the thermal performance between different PCMWs. By analysing the effects of influencing factors on the system thermal performance, this study serves as a useful guide for selection of PCMs in energy-efficient buildings.

[1]  Xin Wang,et al.  A new method to determine thermophysical properties of PCM-concrete brick , 2013 .

[2]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[3]  Changying Zhao,et al.  Heat transfer analysis for phase change materials (PCMs) , 2009 .

[4]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[5]  Adrian Bejan,et al.  Scaling theory of melting with natural convection in an enclosure , 1988 .

[6]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[7]  Luisa F. Cabeza,et al.  Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale , 2013 .

[8]  A. D. Solomon,et al.  An easily computable solution to a two-phase Stefan problem , 1979 .

[9]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[10]  Joseph Virgone,et al.  In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard , 2011 .

[11]  Frédéric Kuznik,et al.  Numerical study of the influence of the convective heat transfer on the dynamical behaviour of a phase change material wall , 2011 .

[12]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[13]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[14]  Changying Zhao,et al.  Natural Convection Investigations in Porous Phase Change Materials , 2011 .

[15]  Dan Zhou,et al.  Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials , 2011 .

[16]  Changying Zhao,et al.  Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES) , 2013 .

[17]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[18]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[19]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[20]  Yi Jiang,et al.  Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard , 2008 .

[21]  Jian Yao,et al.  Effects of Solar Absorption Coefficient of External Wall on Building Energy Consumption , 2011 .

[22]  Romdhane Ben Slama.  Incidental Solar Radiation According to the Solar Collector Slope -Horizontal Measurements Conversion on an Inclined Panel Laws , 2009 .

[23]  Luisa F. Cabeza,et al.  Building integration of PCM for natural cooling of buildings , 2013 .

[24]  Joseph Virgone,et al.  Optimization of a Phase Change Material Wallboard for Building Use , 2008 .

[25]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[26]  Sungwook Hong,et al.  Effects of wallboard design parameters on the thermal storage in buildings , 2011 .

[27]  Yongping Yang,et al.  Performance of shape-stabilized phase change material wallboard with periodical outside heat flux waves , 2011 .

[28]  R. Velraj,et al.  Phase change material-based building architecture for thermal management in residential and commercial establishments , 2008 .

[29]  Y. Tian,et al.  Thermal Analysis in Phase Change Materials (PCMs) Embedded With Metal Foams , 2010 .

[30]  Changying Zhao,et al.  A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals , 2011 .

[31]  Xin Wang,et al.  Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves , 2010 .