论文信息 - Distribution of porosity and macrosegregation in slab steel ingot

Distribution of porosity and macrosegregation in slab steel ingot

The paper presents a new knowledge and experiences with verification and optimization of production technology of heavy slab ingot weighing 40 t from tool steel using the results of numerical modelling and of operational experiments at a steel plant in the company VÍTKOVICE HEAVY MACHINERY a.s. The final porosity, macrosegregation and the risk of cracks were predicted. Based on the results, the slab ingot can be used instead of the conventional heavy steel ingot. Also, the ratio, the chamfer, and the external shape of the wall of the new design of the slab ingot was improved, which enabled to reduce production costs while the internal quality of steel ingots was still maintained at very high level.

[1] K. Michalek,et al. Prediction of qualitative parameters of slab steel ingot using numerical modelling , 2016 .

[2] J. M. Zhang,et al. Numerical simulation of solidification structure of 6.5 wt-%Si steel ingot slab , 2015 .

[3] K. Marx,et al. Optimization of the filling and solidification of large ingots , 2015 .

[4] P. Lan,et al. Numerical analysis of macrosegregation and shrinkage porosity in large steel ingot , 2014 .

[5] Changrong Li,et al. Numerical Simulation of Macrosegregation in Water-Cooled Heavy Flat Ingot During Solidification , 2014, JOM.

[6] Baicheng Liu,et al. Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots , 2014, Metallurgical and Materials Transactions B.

[7] Dianzhong Li,et al. A novel technique for reducing macrosegregation in heavy steel ingots , 2010 .

[8] A. Kermanpur,et al. Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation , 2010 .

[9] Martin Kearney,et al. Development and manufacture of large plate mill rolls , 2007 .

[10] I. Tamura,et al. Influence of Mould Design on the Solidification and Soundness of Heavy Forging Ingots , 1981 .