Strain concentration effects of wood knots under longitudinal tension obtained through digital image correlation

[1]  Josef Füssl,et al.  An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements , 2016 .

[2]  ChingSeong Tan,et al.  A Review of Surface Deformation and Strain Measurement Using Two-Dimensional Digital Image Correlation , 2016 .

[3]  R. Rowlands,et al.  Stresses and Strains in Thick Perforated Orthotropic Plates , 2016 .

[4]  A. Olsson,et al.  Three-dimensional modelling of knots and pith location in Norway spruce boards using tracheid-effect scanning , 2016, European Journal of Wood and Wood Products.

[5]  M. Kaliske,et al.  Description of inhomogeneities in wooden structures: modelling of branches , 2013, Wood Science and Technology.

[6]  M. Guaita,et al.  A three-dimensional wood material model to simulate the behavior of wood with any type of knot at the macro-scale , 2013, Wood Science and Technology.

[7]  Juan Ortiz,et al.  The utility of low-cost photogrammetry for stiffness analysis and finite-element validation of wood with knots in bending , 2013 .

[8]  A. Olsson,et al.  Strain fields around knots in Norway spruce specimens exposed to tensile forces , 2012, Wood Science and Technology.

[9]  M. Guaita,et al.  Prediction of bending load capacity of timber beams using a finite element method simulation of knots and grain deviation , 2011 .

[10]  Koji Murata,et al.  Strain analysis of lumber containing a knot during tensile failure , 2011, Journal of Wood Science.

[11]  Alfred Teischinger,et al.  Knots in trees: strain distribution in a naturally optimised structure , 2010, Wood Science and Technology.

[12]  G. Jeong,et al.  Tensile properties of earlywood and latewood from loblolly pine (Pinus taeda) using digital image correlation , 2009 .

[13]  Chongdu Cho,et al.  The concentration of stress and strain in finite thickness elastic plate containing a circular hole , 2008 .

[14]  R. C. Tang,et al.  Stress concentration around knots in laminated beams , 2007 .

[15]  F. W. Smith,et al.  FINITE ELEMENT FRACTURE PREDICTION FOR WOOD WITH KNOTS AND CROSS GRAIN , 2007 .

[16]  C. Foley,et al.  A three-dimensional paradigm of fiber orientation in timber , 2001, Wood Science and Technology.

[17]  Sandhya Samarasinghe,et al.  Displacement fields of wood in tension based on image processing: Part 1. Tension parallel- and perpendicular-to-grain and comparisons with isotropic behaviour. , 2000 .

[18]  Audrey G. Zink,et al.  Strain measurement in wood using a digital image correlation technique , 1995 .