The microstructure and mechanical properties of Zn-25Sn-XAl (X=0–0.09 wt%) high temperature lead free solder

[1]  H. M. Hosseini,et al.  On the fracture toughness behavior of in-situ Al-Ti composites produced via mechanical alloying and hot extrusion , 2016 .

[2]  Guodong Wang,et al.  Improvement of strength and toughness for hot rolled low-carbon bainitic steel via grain refinement and crystallographic texture , 2016 .

[3]  H. Fu,et al.  Microstructure, fracture toughness and compressive property of as-cast and directionally solidified NiAl-based eutectic composite , 2016 .

[4]  S. Ringer,et al.  Microstructural evolution, strengthening and thermal stability of an ultrafine-grained Al–Cu–Mg alloy , 2016 .

[5]  T. Itoi,et al.  Effect of Sn Addition on Superplastic Properties of Zn-22mass%Al Eutectoid Alloy , 2016 .

[6]  Kwang-Lung Lin,et al.  Effects of Al, Pr additions on the wettability and interfacial reaction of Zn–25Sn solder on Cu substrate , 2016, Journal of Materials Science: Materials in Electronics.

[7]  Kwang-Lung Lin,et al.  Investigations of the wetting behaviors of Zn–25Sn, Zn–25Sn–XPr and Zn–25Sn–YAl high temperature lead free solders in air and Ar ambient , 2015 .

[8]  Chao-hong Wang,et al.  Growth kinetics and mechanism of Pd2Zn9 at the interface of Pd substrate with molten Sn–9wt.%Zn solder , 2015 .

[9]  Liang Zhang,et al.  Creep behavior of SnAgCu solders containing nano-Al particles , 2015, Journal of Materials Science: Materials in Electronics.

[10]  Li Yang,et al.  Microstructure, interfacial IMC and mechanical properties of Sn–0.7Cu–xAl (x = 0–0.075) lead-free solder alloy , 2015 .

[11]  Y. Lei,et al.  Microstructure and Solderability of Zn-6Al-xSn Solders , 2015, Journal of Electronic Materials.

[12]  Kentaro Uesugi,et al.  The influence of Ni and Zn additions on microstructure and phase transformations in Sn–0.7Cu/Cu solder joints , 2015 .

[13]  A. S. Anasyida,et al.  Effect of Al addition to bulk microstructure, IMC formation, wetting and mechanical properties of low-Ag SAC solder , 2015, Journal of Materials Science: Materials in Electronics.

[14]  Kwang-Lung Lin,et al.  Effect of Cr Addition on Wetting Behavior Between Cu and High-Temperature Zn-25Sn-0.15Al-0.1Ga-xCr Pb-Free Solder , 2014, Journal of Electronic Materials.

[15]  Y. Lai,et al.  Ball Impact Reliability of Zn-Sn High-Temperature Solder Joints Bonded with Different Substrates , 2013, Journal of Electronic Materials.

[16]  Chao-hong Wang,et al.  Interfacial reactions of high-temperature Zn–Sn solders with Ni substrate , 2012 .

[17]  A. Kroupa,et al.  Phase transition temperatures of Sn–Zn–Al system and their comparison with calculated phase diagrams , 2012, Journal of Thermal Analysis and Calorimetry.

[18]  M. Eslami,et al.  Shear strength of the Zn–Sn high-temperature lead-free solders , 2011 .

[19]  C. Handwerker,et al.  Lead-Free Solder Process Development: Henshall/Lead-Free Solder Process Development , 2011 .

[20]  M. Eslami,et al.  Impression Creep Behavior of Zn-Sn High-Temperature Lead-Free Solders , 2010 .

[21]  H. Nishikawa,et al.  Improvement of High-Temperature Performance of Zn-Sn Solder Joint , 2010 .

[22]  K. Suganuma,et al.  Improving the Reliability of Si Die Attachment with Zn-Sn-Based High-Temperature Pb-Free Solder Using a TiN Diffusion Barrier , 2009 .

[23]  Winco K. C. Yung,et al.  Influence of small amount of Al and Cu on the microstructure, microhardness and tensile properties of Sn-9Zn binary eutectic solder alloy , 2009 .

[24]  Katsuaki Suganuma,et al.  Interfacial Reactions of Si Die Attachment with Zn-Sn and Au-20Sn High Temperature Lead-Free Solders on Cu Substrates , 2009 .

[25]  K. Suganuma,et al.  Interfacial Reaction and Die Attach Properties of Zn-Sn High-Temperature Solders , 2009 .

[26]  K. Suganuma,et al.  High-temperature lead-free solders: Properties and possibilities , 2009 .

[27]  K. Suganuma,et al.  Characteristics of Zn-Al-Cu Alloys for High Temperature Solder Application , 2008 .

[28]  M. Inoue,et al.  Thermal Properties and Phase Stability of Zn-Sn and Zn-In Alloys as High Temperature Lead-Free Solder , 2007 .

[29]  Katsuaki Suganuma,et al.  Interfacial Properties of Zn–Sn Alloys as High Temperature Lead-Free Solder on Cu Substrate , 2005 .

[30]  Kwang-Lung Lin,et al.  Microstructure and Mechanical Properties of Sn-8.55Zn-1Ag-XAl Solder Alloys , 2005 .

[31]  Masayuki Kitajima,et al.  Development of Sn-Zn-Al Lead-Free Solder Alloys , 2005 .

[32]  A. Ismail,et al.  Effect of different Al contents on the microstructure, tensile and wear properties of Zn-based alloy , 2004 .

[33]  D. StJohn,et al.  Halo formation in directional solidification , 2002 .

[34]  T. Lui,et al.  Effect of aluminum addition on tensile properties of naturally aged Sn-9Zn eutectic solder , 2002 .

[35]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[36]  E. Aragon,et al.  Al-Zn-Sn Phase Diagram X-ray diffraction study at various temperatures , 2004 .

[37]  Kwang-Lung Lin,et al.  The microstructures of the Sn-Zn-Al solder alloys , 1998 .

[38]  E. P. Wood,et al.  In search of new lead-free electronic solders , 1994 .

[39]  E. A. Starke,et al.  Overview no. 102 Theory assisted design of high strength low alloy aluminum , 1993 .

[40]  D. Tréheux,et al.  Al–Zn–Sn phase diagram – isothermal diffusion in ternary system , 1987 .

[41]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[42]  R. Satoh,et al.  Structures and Tensile Properties of Cast Pb-Sn Alloys , 1985 .

[43]  G. Chadwick.  Metallography of phase transformations , 1972 .

[44]  M. Gigliotti,et al.  Correction “halo formation in eutectic alloy systems”—discussion section , 1970 .

[45]  M. Gigliotti,et al.  Halo formation in eutectic alloy systems , 1970, Metallurgical and Materials Transactions B.