Experiments and Modeling of Adaptive Injection Strategies (AIS) in Low Emissions Diesel Engines

[1]  R. Reitz,et al.  A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels , 2008 .

[2]  Rolf D. Reitz,et al.  Modeling Diesel Engine NOx and Soot Reduction with Optimized Two-Stage Combustion , 2006 .

[3]  Rolf D. Reitz,et al.  The application of a multicomponent droplet vaporization model to gasoline direct injection engines , 2003 .

[4]  A. A. Amsden,et al.  KIVA-3V, Release 2: Improvements to KIVA-3V , 1999 .

[5]  Song-Charng Kong,et al.  Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model , 2007 .

[6]  Glenn R. Bower,et al.  A Comparison of the Bosch and Zuech Rate of Injection Meters , 1991 .

[7]  Rolf D. Reitz,et al.  Efficient Multidimensional Simulation of HCCI and DI Engine Combustion with Detailed Chemistry , 2009 .

[8]  Rolf D. Reitz,et al.  A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion , 2006 .

[9]  Rolf D. Reitz,et al.  Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at High-Load , 2008 .

[10]  Ryo Hasegawa,et al.  HCCI Combustion in DI Diesel Engine , 2003 .

[11]  H. Hiroyasu,et al.  Models for combustion and formation of nitric oxide and soot in direct injection diesel engines. SAE Paper 760129 , 1976 .

[12]  Rolf D. Reitz,et al.  An adaptive multi-grid chemistry (AMC) model for efficient simulation of HCCI and DI engine combustion , 2009 .

[13]  A. A. Amsden,et al.  A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines , 1996 .

[14]  Bertrand Gatellier,et al.  Development of the High Power NADI™ Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions , 2002 .

[15]  Takeyuki Kamimoto,et al.  High Combustion Temperature for the Reduction of Particulate in Diesel Engines , 1988 .

[16]  Rolf D. Reitz,et al.  The use of variable geometry sprays with low pressure injection for optimization of diesel HCCI engine combustion , 2005 .

[17]  Rolf D. Reitz,et al.  An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations , 2008 .

[18]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[19]  K. Akihama,et al.  Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature , 2001 .

[20]  Naoki Shimazaki,et al.  Combustion and Emission Characteristics of Premixed Lean Diesel Combustion Engine , 1997 .

[21]  Rolf D. Reitz,et al.  Adaptive Injection Strategies (AIS) for Ultra-Low Emissions Diesel Engines , 2008 .

[22]  R. Reitz,et al.  Reduction of Numerical Parameter Dependencies in Diesel Spray Models , 2007 .

[23]  Takashi Suzuki,et al.  A NEW CONCEPT FOR LOW EMISSION DIESEL COMBUSTION , 1997 .

[24]  John Abraham,et al.  WHAT IS ADEQUATE RESOLUTION IN THE NUMERICAL COMPUTATIONS OF TRANSIENT JETS , 1997 .

[25]  Ingemar Denbratt,et al.  Operation of a DI Diesel Engine With Variable Effective Compression Ratio in HCCI and Conventional Diesel Mode , 2005 .

[26]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[27]  John Abraham,et al.  ENTRAPMENT CHARACTERISTICS OF TRANSIENT GAS JETS , 1996 .

[28]  Dennis L. Siebers,et al.  Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion , 2003 .

[29]  Kenji Kawai,et al.  Trial of New Concept Diesel Combustion System - Premixed Compression-Ignited Combustion - , 1999 .

[30]  Peter J. O'Rourke,et al.  A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .

[31]  John E. Dec,et al.  Influence of Fuel Autoignition Reactivity on the High-Load Limits of HCCI Engines , 2008 .

[32]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[33]  Rolf D. Reitz,et al.  A Computational Investigation of Two-Stage Combustion in a Light-Duty Engine , 2008 .

[34]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[35]  Keiki Tanabe,et al.  Flexibly Controlled Injection Rate Shape with Next Generation Common Rail System for Heavy Duty DI Diesel Engines , 2000 .

[36]  Brian Cooper,et al.  Advanced Diesel Technology to Achieve Tier 2 Bin 5 Emissions Compliance in US Light-Duty Diesel Applications , 2006 .