A 92%-Efficiency Battery Powered Hybrid DC-DC Converter for IoT Applications

A two-stage hybrid power management unit (PMU) is presented with a highly-efficient novel ON-OFF LDO as the second stage and uses a switched-capacitor dc-dc divider as the first stage. The design targets IoT applications that operate across a wide range of load from sub-microwatt to 100’s of microwatts. The first stage provides a step-down using selectable sizing of its switches to improve efficiency to >95% across the target range of load current. The output voltage that is divided from the first stage is then regulated using the proposed ON-OFF LDO with a dropout voltage of < 30mV. The hybrid architecture regulates a 1.3V input to 0.4V and achieves a power efficiency of >80% for load ranges <inline-formula> <tex-math notation="LaTeX">$1\mu $ </tex-math></inline-formula>-<inline-formula> <tex-math notation="LaTeX">$240\mu \text{A}$ </tex-math></inline-formula>. The design is fabricated in 28-nm CMOS technology.

[1]  Anantha Chandrakasan,et al.  Platform architecture for solar, thermal and vibration energy combining with MPPT and single inductor , 2011, 2011 Symposium on VLSI Circuits - Digest of Technical Papers.

[2]  R. Sanders,et al.  Analytical and Practical Analysis of Switched-Capacitor DC-DC Converters , 2006 .

[3]  Joel L. Dawson,et al.  An energy management IC for bio-implants using ultracapacitors for energy storage , 2010, 2010 Symposium on VLSI Circuits.

[4]  Mohamed M. Aboudina,et al.  Dual-Source Self-Start High-Efficiency Microscale Smart Energy Harvesting System for IoT , 2018, IEEE Transactions on Industrial Electronics.

[5]  Ramesh Harjani,et al.  3.5–0.5V input, 1.0V output multi-mode power transformer for a supercapacitor power source with a peak efficiency of 70.4% , 2015, 2015 IEEE Custom Integrated Circuits Conference (CICC).

[6]  H. Hashemi,et al.  Capacitance-sharing, dual-output, compact, switched-capacitor DC–DC converter for low-power biomedical implants , 2014 .

[7]  Chih-Kong Ken Yang,et al.  An 85%-Efficiency Hybrid DC-DC Converter for Sub-Microwatt IoT Applications , 2019, 2019 IEEE 62nd International Midwest Symposium on Circuits and Systems (MWSCAS).

[8]  Jan M. Rabaey,et al.  A 2.4 GHz Interferer-Resilient Wake-Up Receiver Using A Dual-IF Multi-Stage N-Path Architecture , 2016, IEEE Journal of Solid-State Circuits.

[9]  S.R. Sanders,et al.  Analysis and Optimization of Switched-Capacitor DC–DC Converters , 2008, IEEE Transactions on Power Electronics.

[10]  Seok-Jun Lee,et al.  Microwatt Embedded Processor Platform for Medical System-on-Chip Applications , 2011, IEEE Journal of Solid-State Circuits.

[11]  Elad Alon,et al.  Design Techniques for Fully Integrated Switched-Capacitor DC-DC Converters , 2011, IEEE Journal of Solid-State Circuits.

[12]  Edgar Sánchez-Sinencio,et al.  Full On-Chip CMOS Low-Dropout Voltage Regulator , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[13]  Yong Lian,et al.  A 0.45-to-1.2-V Fully Digital Low-Dropout Voltage Regulator With Fast-Transient Controller for Near/Subthreshold Circuits , 2016, IEEE Transactions on Power Electronics.

[14]  Shouri Chatterjee,et al.  An 18 nA, 87% Efficient Solar, Vibration and RF Energy-Harvesting Power Management System With a Single Shared Inductor , 2016, IEEE Journal of Solid-State Circuits.

[15]  Rui Paulo Martins,et al.  A Fully Integrated Digital LDO With Coarse–Fine-Tuning and Burst-Mode Operation , 2016, IEEE Transactions on Circuits and Systems II: Express Briefs.

[16]  David Blaauw,et al.  A Millimeter-Scale Energy-Autonomous Sensor System With Stacked Battery and Solar Cells , 2013, IEEE Journal of Solid-State Circuits.

[17]  Jae-sun Seo,et al.  Triple-Mode, Hybrid-Storage, Energy Harvesting Power Management Unit: Achieving High Efficiency Against Harvesting and Load Power Variabilities , 2017, IEEE Journal of Solid-State Circuits.

[18]  Philex Ming-Yan Fan,et al.  An 83.4% Peak Efficiency Single-Inductor Multiple-Output Based Adaptive Gate Biasing DC-DC Converter for Thermoelectric Energy Harvesting , 2015, IEEE Transactions on Circuits and Systems I: Regular Papers.

[19]  David Blaauw,et al.  8.5 A 60%-efficiency 20nW-500µW tri-output fully integrated power management unit with environmental adaptation and load-proportional biasing for IoT systems , 2016, 2016 IEEE International Solid-State Circuits Conference (ISSCC).

[20]  Chih-Kong Ken Yang,et al.  An 8.5pJ/bit Ultra-Low Power Wake-Up Receiver Using Schottky Diodes for IoT Applications , 2019, ESSCIRC 2019 - IEEE 45th European Solid State Circuits Conference (ESSCIRC).

[21]  Chih-Kong Ken Yang,et al.  Evaluation of Fully-Integrated Switching Regulators for CMOS Process Technologies , 2007, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[22]  Michiel Steyaert,et al.  12.2 A 94.6%-efficiency fully integrated switched-capacitor DC-DC converter in baseline 40nm CMOS using scalable parasitic charge redistribution , 2016, 2016 IEEE International Solid-State Circuits Conference (ISSCC).

[23]  Chih-Wei Chen,et al.  A Low-Power Dual-Frequency SIMO Buck Converter Topology With Fully-Integrated Outputs and Fast Dynamic Operation in 45 nm CMOS , 2015, IEEE Journal of Solid-State Circuits.

[24]  David Blaauw,et al.  A hybrid DC-DC converter for sub-microwatt sub-1V implantable applications , 2009, 2009 Symposium on VLSI Circuits.

[25]  Michiel Steyaert,et al.  Monolithic switched-capacitor DC-DC towards high voltage conversion ratios , 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL).

[26]  Regan Zane,et al.  Power Management System for Online Low Power RF Energy Harvesting Optimization , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[27]  Mohamad Sawan,et al.  An Ultra-Low-Power Energy-Efficient Dual-Mode Wake-Up Receiver , 2015, IEEE Transactions on Circuits and Systems I: Regular Papers.