Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating

[1]  Yanhui Cheng,et al.  Microstructure and properties of laser clad Fe-based amorphous alloy coatings containing Nb powder , 2020 .

[2]  Xian‐Cheng Zhang,et al.  Effect of laser scanning speed on microstructure and properties of Fe based amorphous/ nanocrystalline cladding coatings , 2020 .

[3]  D. Kong,et al.  Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution , 2020 .

[4]  D. Kong,et al.  Microstructure and corrosion behaviours of composite coatings on S355 offshore steel prepared by laser cladding combined with micro-arc oxidation , 2019 .

[5]  M. Ipatov,et al.  Structural and magnetic properties of amorphous and nanocrystalline Fe–Si–B–P–Nb–Cu alloys produced by gas atomization , 2019, Journal of Alloys and Compounds.

[6]  Yong Sun,et al.  Corrosive wear of multi-layer Fe-based coatings laser cladded from amorphous powders , 2019, Wear.

[7]  Weihua Wang,et al.  Fast surface dynamics enabled cold joining of metallic glasses , 2019, Science Advances.

[8]  Ye Tian,et al.  Microstructure and Mechanical Properties of Two-Layer Laser-Cladded Co-Based Coatings , 2019, Journal of Thermal Spray Technology.

[9]  Tao Zhang,et al.  Effect of similar element substitution on Fe-B-Si-Mo bulk metallic glasses studied by experiment and ab initio molecular dynamics simulation , 2019, Journal of Alloys and Compounds.

[10]  D. Du,et al.  Influence of Scanning Speed on Microstructure and Properties of Laser Cladded Fe-Based Amorphous Coatings , 2019, Materials.

[11]  M. Ma,et al.  Effect of Nb content on corrosion behavior of Ti-based bulk metallic glass composites in different solutions , 2019, Applied Surface Science.

[12]  Yunzhuo Lu,et al.  Laser 3D printing of Zr-based bulk metallic glass , 2019, Journal of Manufacturing Processes.

[13]  M. Zhang,et al.  Electrochemical and chemical corrosion behaviors of the in-situ Zr-based metallic glass matrix composites in chloride-containing solutions , 2019, Journal of Alloys and Compounds.

[14]  Bangquan Liao,et al.  Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding , 2018, Optics & Laser Technology.

[15]  W. Ke,et al.  Influence of the secondary phase on micro galvanic corrosion of low carbon bainitic steel in NaCl solution , 2018 .

[16]  Yue Wu,et al.  3D printing of Fe-based bulk metallic glasses and composites with large dimensions and enhanced toughness by thermal spraying , 2018 .

[17]  S. Bai,et al.  The anti-corrosion behavior under multi-factor impingement of Hastelloy C22 coating prepared by multilayer laser cladding , 2018 .

[18]  Zaoli Zhang,et al.  Origin of large plasticity and multiscale effects in iron-based metallic glasses , 2018, Nature Communications.

[19]  Yunzhuo Lu,et al.  Crack-free Fe-based amorphous coating synthesized by laser cladding , 2018 .

[20]  R. Riva,et al.  Metallic Glass Formation Upon Rapid Solidification of Fe60Cr8Nb8B24 (at%) Alloy through LASER Cladding and Remelting , 2017 .

[21]  Hongxiang Li,et al.  Enhancement on GFA and mechanical properties of Ni-based bulk metallic glasses through Fe addition , 2017 .

[22]  Wenli Song,et al.  Microstructural Control via Copious Nucleation Manipulated by In Situ Formed Nucleants: Large‐Sized and Ductile Metallic Glass Composites , 2016, Advanced materials.

[23]  Jianfei Sun,et al.  Isothermal kinetics approach to investigate the structure relaxation of amorphous alloys , 2015 .

[24]  A. Inoue,et al.  Iron-based bulk metallic glasses , 2013 .

[25]  A. Pruna,et al.  Electrochemical study on new polymer composite for zinc corrosion protection , 2012 .

[26]  C. Zhang,et al.  Corrosion and wear resistance of a Fe-based amorphous coating in underground environment , 2012 .

[27]  Ruifeng Li,et al.  Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process , 2012 .

[28]  Lin Liu,et al.  Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings , 2012 .

[29]  Zhi-shui Yu,et al.  Synthesis of Fe–Ni–B–Si–Nb amorphous and crystalline composite coatings by laser cladding and remelting , 2011 .

[30]  A. Manna,et al.  PIXE & XRD analysis of nanocrystals of Fe, Ni and Fe2O3 , 2007 .

[31]  Akira Takeuchi,et al.  Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .