Frequency dependence of the lifetime of a surface micromachined microengine driving a load

Abstract Experiments have been performed on surface micromachined microengines driving load gears to determine the rotational frequency dependence on median cycles to failure. A sample of 272 microengines, each driving a load, was stressed at eight different frequencies. Frequency dependence was observed and a model was developed based on fundamental wear mechanisms and forces exhibited in resonant mechanical systems. Stressing loaded microengines caused observable wear in the rotating joints and in a few instances led to fracture of the pin joint in the drive gear.

[1]  S.B. Brown,et al.  Materials reliability in MEMS devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  P. Clews,et al.  Failure modes in surface micromachined microelectromechanical actuators , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).

[3]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[4]  J. Sniegowski.  Multi-level polysilicon surface-micromachining technology: Applications and issues , 1996 .

[5]  Kenneth A. Peterson,et al.  Failure analysis for micro-electrical-mechanical systems (MEMS) , 1997 .

[6]  Paul J. McWhorter,et al.  Performance trade-offs for a surface micromachined microengine , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[7]  R. L. Edwards,et al.  Measurements of Young's modulus, Poisson's ratio, and tensile strength of polysilicon , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[8]  Paul J. McWhorter,et al.  Friction in surface-micromachined microengines , 1996, Smart Structures.

[9]  Ernest J. Garcia,et al.  Surface micromachined microengine , 1995 .

[10]  D. M. Tanner,et al.  The effect of frequency on the lifetime of a surface micromachined microengine driving a load , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).

[11]  Danelle M. Tanner,et al.  First reliability test of a surface-micromachined microengine using SHiMMeR , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[12]  J. Chang,et al.  Design rules for a reliable surface micromachined IC sensor , 1995, Proceedings of 1995 IEEE International Reliability Physics Symposium.

[13]  Michael Thomas Dugger,et al.  Friction and wear in surface-micromachined tribological test devices , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[14]  Jack A. Collins,et al.  Failure of materials in mechanical design , 1981 .

[15]  Said Jahanmir,et al.  The relationship between microstructure and wear of mica-containing glass-ceramics , 1996 .

[16]  I. L. Singer,et al.  How Third-Body Processes Affect Friction and Wear , 1998 .