A Novel Articulated Rover for Industrial Pipes Inspection Tasks

Inspection and maintenance of industrial pipes using robots represent an emerging application in Oil & Gas and refinery facilities for NonDestructive Tests (NDT). In this work, we present the design and development of a novel articulated mobile robot able to safely navigate over straight and curved pipes for inspection tasks. This rover is meant to be the base of the hybrid aerial-ground platform of the HYFLIERS project that aims to develop novel solutions to perform inspection measurements with reduced exposure to risks and costs. Thanks to the multiple degrees of freedom and onboard sensors, the rover proposed in this paper can stabilize and navigate on a pipe across welding and over curves. After discussed the mechanical design of the rover, we demonstrate its effectiveness in the localization and navigation of curved pipes.

[1]  Xianmin Zhang,et al.  Climbot: A modular bio-inspired biped climbing robot , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Vincenzo Lippiello,et al.  Implicit robot selection for human multi-robot interaction in Search and Rescue missions , 2016, 2016 25th IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN).

[3]  Carlos Balaguer,et al.  Analysis of the Direct and Inverse Kinematics of ROMA II Robot , 2005, CLAWAR.

[4]  John Bares,et al.  A Semi-Autonomous Robot for Stripping Paint from Large Vessels , 2003, Int. J. Robotics Res..

[5]  Stefano Stramigioli,et al.  Design of a robot for in-pipe inspection using omnidirectional wheels and active stabilization , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[6]  Pablo Ramon Soria,et al.  Autonomous landing on pipes using soft gripper for inspection and maintenance in outdoor environments , 2019, 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[7]  Hriday Bavle,et al.  A Deep Reinforcement Learning Strategy for UAV Autonomous Landing on a Moving Platform , 2018, Journal of Intelligent & Robotic Systems.

[8]  Vincenzo Lippiello,et al.  Nonprehensile Manipulation of Deformable Objects: Achievements and Perspectives from the Robotic Dynamic Manipulation Project , 2018, IEEE Robotics & Automation Magazine.

[9]  Daniel E. Koditschek,et al.  Rapid pole climbing with a quadrupedal robot , 2009, 2009 IEEE International Conference on Robotics and Automation.

[10]  Stefano Stramigioli,et al.  Development of an inspection robot for small diameter gas distribution mains , 2011, 2011 IEEE International Conference on Robotics and Automation.

[11]  Shugen Ma,et al.  Design of a multilink-articulated wheeled inspection robot for winding pipelines: AIRo-II , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[12]  Dean M. Aslam,et al.  Design, fabrication and testing of a miniature wall climbing robot using smart robotic feet , 2007 .

[13]  Karsten Berns,et al.  Climbing robots for maintenance and inspections of vertical structures - A survey of design aspects and technologies , 2013, Robotics Auton. Syst..

[14]  Fei Yanqiong,et al.  Design and Analysis of Modular Mobile Robot with Magnetic Wheels , 2008 .

[15]  Vincenzo Lippiello,et al.  Nonlinear Model Predictive Control for the Stabilization of a Wheeled Unmanned Aerial Vehicle on a Pipe , 2019, IEEE Robotics and Automation Letters.

[16]  Ronald S. Fearing,et al.  Dynamic climbing of near-vertical smooth surfaces , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  Wolfram Burgard,et al.  Monte Carlo Localization: Efficient Position Estimation for Mobile Robots , 1999, AAAI/IAAI.

[18]  Vincenzo Lippiello,et al.  Hybrid visual servoing for aerial grasping with hierarchical task-priority control , 2015, 2015 23rd Mediterranean Conference on Control and Automation (MED).