Distributed generation with energy storage systems: A case study

Due to its relatively high efficiency, Distributed Generation (DG) is widely used to supply energy sources (generally power, heating and cooling) for on-site needs. This, however, presents a challenge to deal with an abrupt increase of electricity demand. To satisfy 100% of electricity demand with a high level dynamic performance energy storage is one of the most promising options for the DG system. In this study a hybrid DG system integrated with Compressed Air Energy Storage (CAES) and Thermal Energy Storage (TES) is proposed. Coupled with energy storage the DG system can perform a ‘peak shaving’ function and maintain the power output requirement properly, resulting in a lower core engine power rating and better process efficiency. To carry out technical evaluation the process flow chart is created and process models are developed. The results of simulation are also validated by IET’s CAES experimental data. The results reveal that the hybrid system’s exergy efficiency is 41.5%, and the primary fuel saving ratio is 23.13%. The CAES expander system is operated in a sliding pressure mode, satisfying various load profiles while its exergy efficiency for one day cycle is 64.7%. Compared with conventional DG system, within the hybrid system the core engine size can be downgraded by 35.3%, the fuel saving ratio is 11.06%.

[1]  Joao P. S. Catalao,et al.  A new perspective for sizing of distributed generation and energy storage for smart households under demand response , 2015 .

[2]  Brian Elmegaard,et al.  Methodologies for predicting the part-load performance of aero-derivative gas turbines , 2009 .

[3]  Yi Jiang,et al.  Energy utilization evaluation of CCHP systems , 2006 .

[4]  Alessandro Romagnoli,et al.  Storing energy for cooling demand management in tropical climates: A techno-economic comparison between different energy storage technologies , 2017 .

[5]  A. Dayan,et al.  Thermodynamic and hydrodynamic response of compressed air energy storage reservoirs: a review , 2012 .

[6]  Adriano Sciacovelli,et al.  Integrating compressed air energy storage with a diesel engine for electricity generation in isolated areas , 2016 .

[7]  Michael G. Pollitt,et al.  Integrating distributed generation: Regulation and trends in three leading countries , 2015 .

[8]  Guoqiang Zhang,et al.  Exergy analysis of a novel CHP–GSHP coupling system , 2016 .

[9]  François Maréchal,et al.  Thermo-economic optimization of a combined cooling, heating and power system based on small-scale compressed air energy storage , 2016 .

[10]  Sanna Syri,et al.  Electrical energy storage systems: A comparative life cycle cost analysis , 2015 .

[11]  Vilja Varho,et al.  Transition to distributed energy generation in Finland: Prospects and barriers , 2015 .

[12]  Rafic Younes,et al.  Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas , 2010 .

[13]  Jihong Wang,et al.  A review on compressed air energy storage – A pathway for smart grid and polygeneration , 2016 .

[14]  J. Paska,et al.  Hybrid power systems – An effective way of utilising primary energy sources , 2009 .

[15]  Jian Xu,et al.  Study on the performance and optimization of a scroll expander driven by compressed air , 2017 .

[16]  Tan Zhong-fu,et al.  How to develop distributed generation in China: In the context of the reformation of electric power system , 2016 .

[17]  Roger C. Dugan,et al.  Distributed generation , 2002 .

[18]  Theodore Motyka,et al.  SCREENING ANALYSIS OF METAL HYDRIDE BASED THERMAL ENERGY STORAGE SYSTEMS FOR CONCENTRATING SOLAR POWER PLANTS , 2014 .

[19]  Antonio Colmenar-Santos,et al.  Distributed generation: A review of factors that can contribute most to achieve a scenario of DG units embedded in the new distribution networks , 2016 .

[20]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[21]  Siddhartha Kumar Khaitan,et al.  Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant , 2012 .

[22]  Nelson Fumo,et al.  Benefits of thermal energy storage option combined with CHP system for different commercial building types , 2013 .

[23]  Na Zhang,et al.  Analytical solutions and typical characteristics of part-load performances of single shaft gas turbine and its cogeneration , 2002 .

[24]  Stein W. Wallace,et al.  Synergy of smart grids and hybrid distributed generation on the value of energy storage , 2016 .

[25]  Lukas G. Swan,et al.  Regenerative air energy storage for remote wind–diesel micro-grid communities , 2015 .

[26]  Massimiliano Renzi,et al.  Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior , 2014 .

[27]  Coriolano Salvini,et al.  Techno-Economic Analysis of CAES Systems Integrated into Gas-Steam Combined Plants , 2016 .

[28]  Dheeraj Kumar Khatod,et al.  Optimal planning of distributed generation systems in distribution system: A review , 2012 .

[29]  Saffa Riffat,et al.  Expanders for micro-CHP systems with organic Rankine cycle , 2011 .

[30]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[31]  Srinivas Garimella,et al.  Waste heat driven absorption/vapor-compression cascade refrigeration system for megawatt scale, high-flux, low-temperature cooling , 2011 .

[32]  Martin Koller,et al.  Advanced Adiabatic Compressed Air Energy Storage for the Integration of Wind Energy , 2004 .

[33]  Pedro J. Mago,et al.  Combined cooling, heating and power: A review of performance improvement and optimization , 2014 .

[34]  Goran Krajačić,et al.  Planning for a 100% independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction , 2011 .

[35]  Rabah Gomri,et al.  Investigation of the potential of application of single effect and multiple effect absorption cooling systems , 2010 .

[36]  Yujie Xu,et al.  Hybrid CCHP system combined with compressed air energy storage , 2015 .

[37]  Ramesh C. Bansal,et al.  Reliability assessment of distribution system with the integration of renewable distributed generation , 2017 .

[38]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .