Characterization of strain field distribution in carbon fiber reinforced resin matrix composites using electron beam moiré and geometric phase analysis

[1]  S. Ri,et al.  Sampling Moiré method for full-field deformation measurement: A brief review , 2022, Theoretical and Applied Mechanics Letters.

[2]  S. Fu,et al.  Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites , 2021, Composites Part B: Engineering.

[3]  X. Hou,et al.  Experimental determination of the interface residual stresses of carbon-fiber-reinforced polymers , 2020 .

[4]  D. Therriault,et al.  In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load , 2019, Experimental Mechanics.

[5]  Nhung Nguyen,et al.  Application of continuum decohesive finite element to progressive failure analysis of composite materials , 2019, Composite Structures.

[6]  Ping Zhu,et al.  Uncertainty analysis of mechanical properties of plain woven carbon fiber reinforced composite via stochastic constitutive modeling , 2019, Composite Structures.

[7]  Hiroshi Tsuda,et al.  Optical full-field strain measurement method from wrapped sampling Moiré phase to minimize the influence of defects and its applications , 2018, Optics and lasers in engineering.

[8]  Chandra Shakher,et al.  Measurement of initial displacement of canine and molar in human maxilla under different canine retraction methods using digital holographic interferometry , 2018, Optical Engineering.

[9]  M. Esfandeh,et al.  Effect of surface modification of electrochemically oxidized carbon fibers by grafting hydroxyl and amine functionalized hyperbranched polyurethanes on interlaminar shear strength of epoxy composites , 2017 .

[10]  Antonios Kontsos,et al.  Investigation of the Z-binder role in progressive damage of 3D woven composites , 2017 .

[11]  J. Zhu,et al.  A novel raster-scanning method to fabricate ultra-fine cross-gratings for the generation of electron beam moiré fringe patterns , 2016 .

[12]  Manoj Kumar,et al.  Measurement of strain distribution in cortical bone around miniscrew implants used for orthodontic anchorage using digital speckle pattern interferometry , 2016 .

[13]  Manoj Kumar,et al.  Measurement of hygroscopic strain in deodar wood during convective drying using lensless Fourier transform digial holography , 2016, SPIE Photonics Europe.

[14]  C. Shakher,et al.  Experimental characterization of the hygroscopic properties of wood during convective drying using digital holographic interferometry. , 2016, Applied optics.

[15]  G. Nicoletto,et al.  Evolution of Strain Fields During Tensile Tests of Random Discontinuous Carbon/Epoxy Composites , 2016 .

[16]  Manoj Kumar,et al.  Measurement of elastic and thermal properties of composite materials using digital speckle pattern interferometry , 2015, Speckle: International Conference on Speckle Metrology.

[17]  Manoj Kumar,et al.  Measurement of Material Constants (Young's Modulus and Poisson's Ratio) of Polypropylene Using Digital Speckle Pattern Interferometry (DSPI) , 2015 .

[18]  D. Revin,et al.  Artefacts in geometric phase analysis of compound materials. , 2015, Ultramicroscopy.

[19]  M. Sutton,et al.  A DIC-based study of in-plane mechanical response and fracture of orthotropic carbon fiber reinforced composite , 2014 .

[20]  Xianglu Dai,et al.  The geometric phase analysis method based on the local high resolution discrete Fourier transform for deformation measurement , 2014 .

[21]  L. Gorbatikh,et al.  Stress concentrations in an impregnated fibre bundle with random fibre packing , 2013 .

[22]  M. Karahan.  The effect of fibre volume fraction on damage initiation and propagation of woven carbon-epoxy multi-layer composites , 2012 .

[23]  Satoshi Kishimoto,et al.  Electron Moiré method , 2012 .

[24]  Conor T. McCarthy,et al.  Micromechanical modelling of the transverse damage behaviour in fibre reinforced composites , 2011 .

[25]  Yanjie Li,et al.  Fabrication of micro-moiré gratings on a strain sensor structure for deformation analysis with micro-moiré technique , 2009, Microelectron. Reliab..

[26]  L. Rabenberg,et al.  Effects of strain gradients on strain measurements using geometrical phase analysis in the transmission electron microscope. , 2008, Ultramicroscopy.

[27]  N. Takeda,et al.  Numerical modeling of progressive damage in fiber reinforced plastic cross-ply laminates , 2008 .

[28]  P. Bai,et al.  Experimental examination of displacement and strain fields in an edge dislocation core , 2008 .

[29]  Ignace Verpoest,et al.  Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test , 2006 .

[30]  E. Sarigiannidou,et al.  Theoretical discussions on the geometrical phase analysis. , 2005, Ultramicroscopy.

[31]  Hideaki Matsubara,et al.  Memorizing maximum strain in carbon-fiber-reinforced plastic composites by measuring electrical resistance under pre-tensile stress , 2005 .

[32]  Shuguang Li,et al.  Energy release rates for transverse cracking and delaminations induced by transverse cracks in laminated composites , 2005 .

[33]  N. Takeda,et al.  Characterization of tensile damage and strength in GFRP cross-ply laminates , 2004 .

[34]  N. Shinya,et al.  A Novel Method for Determining Interfacial Residual Stress in Fiberreinforced Composites , 2004 .

[35]  M. Hÿtch,et al.  Measurement of the displacement field of dislocations to 0.03 Å by electron microscopy , 2003, Nature.

[36]  M. Hojo,et al.  The influence of thermal residual stresses on the transverse strength of CFRP using FEM , 2002 .

[37]  Nobuo Takeda,et al.  The application of a ply-refinement technique to the analysis of microscopic deformation in interlaminar-toughened laminates with transverse cracks , 2000 .

[38]  N. Takeda,et al.  Micromechanical characterization of local deformation in interlaminar-toughened CFRP laminates , 1998 .

[39]  Martin Hÿtch,et al.  Quantitative measurement of displacement and strain fields from HREM micrographs , 1998 .

[40]  Xiaojun Wang,et al.  Fiber breakage in polymer-matrix composite during static and fatigue loading, observed by electrical resistance measurement , 1999 .

[41]  N. Takeda,et al.  Application of microline/grid methods to temperature dependent microscopic deformation and damage in CFRP laminates , 1997 .

[42]  Chee Yoon Yue,et al.  Axisymmetric stress distribution in the single filament pull-out test , 1994 .

[43]  James W. Dally,et al.  Electron Beam Moiré Study of Fracture of a Glass Fiber Reinforced Plastic Composite , 1994 .

[44]  C. Zweben.  Failure analysis of unidirectional fiber composites under combined axial tension and shear , 1974 .