Three-Dimensional Analysis of Masonry Vaults Using Limit State Analysis with Finite Friction

Within the past 20 years, a growing number of methods for the analysis of masonry vaults have been developed. However, most methods idealize the vaults as a system of many arches. This oversimplification could be admissible for barrel vaults and spherical domes under simple gravitational loads, but it cannot do justice to the three-dimensional effects developing in other types of vaults, especially in complex vaults without smooth and continuous surface. Moreover, although the results could be conservative for uniform load distributions, this model limits substantially the set of loading conditions that can be analyzed and hence provide an accurate assessment of vaults performance. To clear this limitation, this article proposes a tool for three-dimensional analysis of masonry vaults. Using the lower bound approach and taking into account the friction among block interfaces, the proposed analytical method may give a good indication of the actual surface of thrust within the framework of limit state analysis. Therefore, limit state analysis with finite friction is able to provide the crack pattern, the stress resultants and the horizontal thrust at the supports, important elements with regard to strengthening interventions. To show its simplicity and rigor, the procedure has been applied to pavilion vaults. The results obtained are validated by comparison with nonlinear finite element analysis and an application to a real case study is presented.

[1]  Lluís Gil,et al.  Computational Analysis of Masonry Structures with a Funicular Model , 2007 .

[2]  Pierre Smars.  Influence of friction and tensile resistance on the stability of masonry arches , 2008 .

[3]  Dina D'Ayala,et al.  Limit state analysis of hemispherical domes with finite friction , 2001 .

[4]  R. Livesley.  A computational model for the limit analysis of three-dimensional masonry structures , 1992 .

[5]  Dermot O'Dwyer,et al.  Funicular analysis of masonry vaults , 1999 .

[6]  W. Flügge.  Stresses in Shells , 1960 .

[7]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[8]  Paulo B. Lourenço,et al.  Assessment of the in-plane shear strength of stone masonry walls by simplified models , 2006 .

[9]  P. Trovalusci,et al.  Limit Analysis for No-Tension and Frictional Three-Dimensional Discrete Systems* , 1998 .

[10]  Dina D'Ayala,et al.  Structural Behaviour of Masonry Vaults: Limit State Analysis with Finite Friction , 2008 .

[11]  P. Lourenço.  Computational strategies for masonry structures : Proefschrift , 1996 .

[12]  Luigia Binda,et al.  Numerical modeling of shear bond tests on small brick-masonry assemblages , 1998 .

[13]  Paulo B. Lourenço,et al.  Characterization of Cyclic Behavior of Dry Masonry Joints , 2004 .

[14]  M. Ferris,et al.  Limit Analysis of Frictional Block Assemblies as a Mathematical Program With Complementarity Constraints , 2001 .

[15]  Clive. Melbourne,et al.  RIGID-BLOCK ANALYSIS OF MASONRY STRUCTURES , 1994 .

[16]  Serena Cattari,et al.  Modelling of vaults as equivalent diaphragms in 3D seismic analysis of masonry buildings , 2008 .

[17]  Irving J. Oppenheim,et al.  Limit State Analysis of Masonry Domes , 1989 .

[18]  D. C. Drucker.  COULOMB FRICTION, PLASTICITY, AND LIMIT LOADS , 1953 .

[19]  Bernard Amadei,et al.  Response of Masonry Bed Joints in Direct Shear , 1989 .

[20]  Santiago Sánchez-Cervera Huerta,et al.  Mechanics of masonry vaults: The equilibrium approach , 2001 .

[21]  Paulo B. Lourenço,et al.  Analysis of historical constructions : From thrust-lines to advanced simulations , 2003 .

[22]  G. de Josselin de Jong,et al.  Lower Bound Collapse Theorem and Lack of Normality of Strainrate to Yield Surface for Soils , 1966 .

[23]  Z. Mroz,et al.  Associated and non-associated sliding rules in contact friction problems. , 1978 .

[24]  Douglas T. Wright,et al.  Equilibrium of shell structures , 1978 .

[25]  Sergio Lagomarsino,et al.  A MICROMECHANICAL INELASTIC MODEL FOR HISTORICAL MASONRY , 2006 .

[26]  R. Livesley.  Limit analysis of structures formed from rigid blocks , 1978 .

[27]  Andrew Palmer,et al.  A limit theorem for materials with non-associated flow laws , 1966 .

[28]  P. Lourenço,et al.  Multisurface Interface Model for Analysis of Masonry Structures , 1997 .

[29]  Jacques Heyman,et al.  The stone skeleton , 1995 .

[30]  T. Boothby.  Stability of Masonry Piers and Arches Including Sliding , 1994 .

[31]  F. Calvetti,et al.  Distinct element analysis of stone arches , 2020, Arch Bridges.

[32]  Paulo B. Lourenço,et al.  Three-dimensional limit analysis of rigid blocks assemblages. Part II : load-path following solution procedure and validation , 2005 .

[33]  P. Lourenço,et al.  Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional interfaces and limit analysis formulation , 2005 .

[34]  Philippe Block,et al.  Lower-bound analysis of masonry vaults , 2008 .