Thermoforming carbon fibre-reinforced thermoplastic composites

The use of carbon fibre composites is growing in many sectors but their use remains stronger in very high value industries such as aerospace where the demands of the application more easily justify the high energy input needed and the corresponding costs incurred. This energy and cost input is returned through gains over the whole life of the product, with for example, longer maintenance intervals for an aircraft and lower fuel burn. Thermoplastic composites however have a different energy and cost profile compared to traditional thermosets with notable differences in recyclability, but this profile is not well quantified or documented. This study considers the key process control parameters and identifies an optimal window for processing, along with the effect this has on the final characteristics of the manufactured parts. Interactions between parameters and corresponding sensitivities are extracted from the results.

[1]  L. Ye,et al.  Manufacture of CF/PEEK composites from powder/sheath fibre preforms , 1994 .

[2]  R. T. Hawkins.  Chemistry of the Cure of Poly(p-phenylene sulfide) , 1976 .

[3]  D. G. Brady.  The crystallinity of poly(phenylene sulfide) and its effect on polymer properties , 1976 .

[4]  Jorge A Diaz,et al.  Developments to manufacture structural aeronautical parts in carbon fibre reinforced thermoplastic materials , 2003 .

[5]  H. Bersee,et al.  Induction welding of thermoplastic composites—an overview , 2006 .

[6]  M. Blinzler,et al.  Processing technologies for continuous fibre reinforced thermoplastics with novel polymer blends , 2003 .

[7]  P. Cebe.  Review of Recent Developments in Poly(Phenylene Sulphide) , 1995, Engineering Plastics.

[8]  Adriaan Beukers,et al.  Residual stresses in thermoplastic composites—A study of the literature—Part I: Formation of residual stresses , 2006 .

[9]  Adriaan Beukers,et al.  Consolidation of Thermoplastic Composites , 2003 .

[10]  N. L. Hancox.  High performance thermoplastic resins and their composites S. Béland: Noyes Data Corporation, NY, USA 1991, ISBN-8153-1278-3, £45 , 1993 .

[11]  Yuin Wu,et al.  Taguchi Methods for Robust Design , 2000 .

[12]  Xiaozhi Hu,et al.  Processing of carbon-fibre/epoxy composites with cost-effective interlaminar reinforcement , 1998 .

[13]  P. Davies,et al.  A study of the effect of forming temperature on the mechanical behaviour of carbon-fibre/peek composites , 1993 .

[14]  Y. Mai,et al.  Manufacturing process and mechanical properties of thermoplastic composite components , 1997 .

[15]  K. Friedrich,et al.  Modeling of the mechanical properties of discontinuous-aligned-fiber composites after thermoforming , 1997 .

[16]  J. Månson,et al.  Void Evolution During Stamp-Forming of Thermoplastic Composites , 2005 .

[17]  Joseph G. Pigeon,et al.  Statistics for Experimenters: Design, Innovation and Discovery , 2006, Technometrics.

[18]  F. Jones,et al.  The role of sizing resins in carbon fibre-reinforced polyethersulfone (PES) , 1994 .

[19]  K. Friedrich,et al.  Inter- and intraply-slip flow processes during thermoforming of cf/pp-laminates , 1991 .

[20]  T. Gutowski,et al.  Life cycle energy analysis of fiber-reinforced composites , 2009 .

[21]  A. Offringa.  Thermoplastic composites—rapid processing applications , 1996 .

[22]  Lin Ye,et al.  De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites , 2005 .

[23]  Daniel F. Walczyk,et al.  Design and fabrication of a laminated thermoforming tool with enhanced features , 2009 .

[24]  J. S. Hunter,et al.  Statistics for Experimenters: Design, Innovation, and Discovery , 2006 .