Wavelet based spectral finite element modelling and detection of de-lamination in composite beams

In this paper, a model for composite beam with embedded de-lamination is developed using the wavelet based spectral finite element (WSFE) method particularly for damage detection using wave propagation analysis. The simulated responses are used as surrogate experimental results for the inverse problem of detection of damage using wavelet filtering. The WSFE technique is very similar to the fast fourier transform (FFT) based spectral finite element (FSFE) except that it uses compactly supported Daubechies scaling function approximation in time. Unlike FSFE formulation with periodicity assumption, the wavelet-based method allows imposition of initial values and thus is free from wrap around problems. This helps in analysis of finite length undamped structures, where the FSFE method fails to simulate accurate response. First, numerical experiments are performed to study the effect of de-lamination on the wave propagation characteristics. The responses are simulated for different de-lamination configurations for both broad-band and narrow-band excitations. Next, simulated responses are used for damage detection using wavelet analysis.

[1]  Stéphane Mallat,et al.  A Theory for Multiresolution Signal Decomposition: The Wavelet Representation , 1989, IEEE Trans. Pattern Anal. Mach. Intell..

[2]  James F. Doyle,et al.  Wave Propagation in Structures , 1989 .

[3]  Daubechies,et al.  Ten Lectures on Wavelets Volume 921 , 1992 .

[4]  G. Beylkin On the representation of operators in bases of compactly supported wavelets , 1992 .

[5]  John R. Williams,et al.  Introduction to wavelets in engineering , 1994 .

[6]  David L. Donoho,et al.  De-noising by soft-thresholding , 1995, IEEE Trans. Inf. Theory.

[7]  Kevin Amaratunga,et al.  A Discrete Wavelet Transform without edge effects using wavelet extrapolation , 1997 .

[8]  D. Roy Mahapatra,et al.  A spectral finite element model for analysis of axial–flexural–shear coupled wave propagation in laminated composite beams , 2003 .

[9]  Lihua Shi,et al.  Active Monitoring for On-Line Damage Detection in Composite Structures , 2003 .

[10]  D. Roy Mahapatra,et al.  A spectral finite element with embedded delamination for modeling of wave scattering in composite beams , 2003 .

[11]  Srinivasan Gopalakrishnan,et al.  A higher-order spectral element for wave propagation analysis in functionally graded materials , 2004 .

[12]  Zheng Li,et al.  Damage Detection of Beams Based on Experimental Wavelet Analysis of Flexible Waves , 2004 .

[13]  Hoon Sohn,et al.  Wavelet-based active sensing for delamination detection in composite structures , 2004 .

[14]  Mira Mitra,et al.  Spectrally formulated wavelet finite element for wave propagation and impact force identification in connected 1-D waveguides , 2005 .

[15]  Mira Mitra,et al.  Extraction of wave characteristics from wavelet-based spectral finite element formulation , 2006 .