Estimation of urban temperature and humidity using a lumped parameter model coupled with an EnergyPlus model

Abstract In this paper, we describe a lumped thermal parameter model coupled with an EnergyPlus model used for estimating temperature and specific humidity in the near-surface urban environment. Estimations made by the model are compared to measurements obtained from data loggers installed in an urban canyon of Masdar Institute (Abu Dhabi). Based on these comparisons, we first evaluate the most likely ratios of heat released into the urban canyon by a building air handling unit and the wind tower that produces adiabatically cooled air. Next, we analyze three specific case studies to obtain a local estimate of the accuracy that is reached by the coupled scheme. To estimate its global precision, we perform a sensitivity and Monte-Carlo analysis over the most likely ratios of heat emitted by the air handling unit and the wind tower. Although validation in a dense downtown is still lacking and will be undertaken in the future, this study suggests that urban temperature and humidity can be estimated with an acceptable accuracy under moderate waste heat releases and anthropogenic heat gains.

[1]  Rex Britter,et al.  Combining a Detailed Building Energy Model with a Physically-Based Urban Canopy Model , 2011 .

[2]  David P. Allen,et al.  A frequency domain Hampel filter for blind rejection of sinusoidal interference from electromyograms , 2009, Journal of Neuroscience Methods.

[3]  M. Roth,et al.  Temporal dynamics of the urban heat island of Singapore , 2006 .

[4]  Michael Schatzmann,et al.  BUBBLE – an Urban Boundary Layer Meteorology Project , 2005 .

[5]  B. Everitt.  The Cambridge Dictionary of Statistics , 1998 .

[6]  Wilhelm A. Friess,et al.  Wall insulation measures for residential villas in Dubai: A case study in energy efficiency , 2012 .

[7]  R. Balling,et al.  Analysis of the Kuwait city urban heat island , 1990 .

[8]  Hiroyuki Kusaka,et al.  Thermal Effects of Urban Canyon Structure on the Nocturnal Heat Island: Numerical Experiment Using a Mesoscale Model Coupled with an Urban Canopy Model , 2004 .

[9]  J. Mahfouf,et al.  The ISBA land surface parameterisation scheme , 1996 .

[10]  Valéry Masson,et al.  A Physically-Based Scheme For The Urban Energy Budget In Atmospheric Models , 2000 .

[11]  A. Clappier,et al.  An Urban Surface Exchange Parameterisation for Mesoscale Models , 2002 .

[12]  Y. Charabi,et al.  Assessment of the canopy urban heat island of a coastal arid tropical city: The case of Muscat, Oman , 2011 .

[13]  Afshin Afshari,et al.  Life-Cycle Analysis of Building Retrofits at the Urban Scale—A Case Study in United Arab Emirates , 2014 .

[14]  X. Briottet,et al.  The Canopy and Aerosol Particles Interactions in TOulouse Urban Layer (CAPITOUL) experiment , 2008 .

[15]  R. Britter,et al.  A resistance-capacitance network model for the analysis of the interactions between the energy performance of buildings and the urban climate , 2012 .

[16]  Leonidas J. Guibas,et al.  The Earth Mover's Distance as a Metric for Image Retrieval , 2000, International Journal of Computer Vision.

[17]  J. Wallace,et al.  Atmospheric Science: An Introductory Survey , 1977 .

[18]  Leslie K. Norford,et al.  Computationally efficient prediction of canopy level urban air temperature at the neighbourhood scale , 2014 .

[19]  Bruno Bueno Unzeta.  An urban weather generator coupling a building simulation program with an urban canopy model , 2010 .

[20]  R. Pielke,et al.  Simulation of the effects of surface fluxes of heat and moisture in a mesoscale numerical model: 1. Soil layer , 1981 .

[21]  Timothy R. Oke,et al.  Aerodynamic Properties of Urban Areas Derived from Analysis of Surface Form , 1999 .

[22]  Tomohiko Ihara,et al.  City-block-scale sensitivity of electricity consumption to air temperature and air humidity in business districts of Tokyo, Japan , 2008 .

[23]  S. Planton,et al.  A Simple Parameterization of Land Surface Processes for Meteorological Models , 1989 .

[24]  Bruno Bueno Unzeta.  Study and prediction of the energy interactions between buildings and the urban climate , 2012 .

[25]  Hervé Giordani,et al.  A modified parameterization of flux-profile relationships in the surface layer using different roughness length values for heat and momentum , 1995 .

[26]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .