Post-soft-breakdown characteristics of deep submicron NMOSFETs with ultrathin gate oxide
暂无分享,去创建一个
[1] Guido Groeseneken,et al. On the properties of the gate and substrate current after soft breakdown in ultrathin oxide layers , 1998 .
[2] D. Hwang,et al. Ultra-thin gate dielectrics: they break down, but do they fail? , 1997, International Electron Devices Meeting. IEDM Technical Digest.
[3] Jordi Suñé,et al. Soft breakdown conduction in ultrathin (3-5 nm) gate dielectrics , 2000 .
[4] W. Abadeer,et al. Structural dependence of dielectric breakdown in ultra-thin gate oxides and its relationship to soft breakdown modes and device failure , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).
[5] R. Degraeve,et al. Substrate hole current origin after oxide breakdown , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).
[6] M. Nafria,et al. Point contact conduction at the oxide breakdown of MOS devices , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).
[7] Robert M. Wallace,et al. Low voltage stress-induced-leakage-current in ultrathin gate oxides , 1999, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296).
[8] I. Eisele,et al. Influence of soft breakdown on NMOSFET device characteristics , 1999, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296).
[9] A. Ghetti,et al. Gate oxides in 50 nm devices: thickness uniformity improves projected reliability , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).