Electroless Metallization of Stereolithographic Photocurable Resins for 3D Printing of Functional Microdevices

[1]  M. Lai,et al.  Magnetic cantilever actuator with sharpened magnetic thin film ellipses , 2015 .

[2]  Yan Zhang,et al.  Polymeric cantilever sensors functionalized with multiamine supramolecular hydrogel , 2013 .

[3]  E. de Rijk,et al.  Note: three-dimensional stereolithography for millimeter wave and terahertz applications. , 2012, The Review of scientific instruments.

[4]  V. Soldi,et al.  Electroless plating of nickel-phosphorous on surface-modified poly(ethylene terephthalate) films , 2003 .

[5]  L. Magagnin,et al.  Electroless plating of NiP and Cu on polylactic acid and polyethylene terephthalate glycol-modified for 3D printed flexible substrates , 2016 .

[6]  Cheng Sun,et al.  Micro-stereolithography of polymeric and ceramic microstructures , 1999 .

[7]  Caterina Credi,et al.  3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers. , 2016, ACS applied materials & interfaces.

[8]  A. K. Sood,et al.  Metallization on FDM Parts Using the Chemical Deposition Technique , 2014 .

[9]  A. Boisen,et al.  Fabrication of thin SU-8 cantilevers: initial bending, release and time stability , 2010 .

[10]  Luis Fernando Velasquez-Garcia,et al.  SLA 3-D Printed Arrays of Miniaturized, Internally Fed, Polymer Electrospray Emitters , 2015, Journal of Microelectromechanical Systems.

[11]  Chang Liu.  Development of surface micromachined magnetic actuators using electroplated permalloy , 1998 .

[12]  S. Arunachalam,et al.  Critical parameters influencing the quality of prototypes in fused deposition modelling , 2001 .

[13]  Hui Zhang,et al.  Comparative Study of Electroless Ni-P, Cu, Ag, and Cu-Ag Plating on Polyamide Fabrics: , 2011 .

[14]  B. Luan,et al.  Chemical surface preparation for metallization of stereolithography polymers , 2000 .

[15]  Ron Lawes.  MEMS Cost Analysis : From Laboratory to Industry , 2014 .

[16]  Jian Li,et al.  Electroless copper plating of Fraxinus mandshurica veneer using glyoxylic acid as reducing agent , 2011, BioResources.

[17]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[18]  Innovative concept for the fabrication of micromechanical sensor and actuator devices using selectively metallized polymers , 2002 .