A two-phase high step down coupled-inductor converter for next generation low voltage CPU

In this paper, a novel two-phase high step down coupled-inductor converter for next generation low voltage CPU is proposed. This converter has a very high step down characteristic as Vo/Vi = D/4. The switching loss and noise of all switching elements are sufficiently reduced because the drain-source voltages at switching periods are reduced to a quarter of the input source voltage. Low withstand voltage MOSFETs with low on resistance and low Qg(total gate charge) characteristics are possible to use for the all switching elements because the maximum voltage stresses of the main switches and the synchronous rectifier switches are reduced to a half and a quarter of the input source voltage respectively. Further, the branch currents flowed through the paralleled converters are automatically and mostly balanced without the current detection and balance control. The above fine characteristics are simply achieved with three additional capacitors.

[1]  K. Harada,et al.  Analysis of Double Step-Down Two-Phase Buck Converter for VRM , 2005, INTELEC 05 - Twenty-Seventh International Telecommunications Conference.

[2]  K. Harada,et al.  A double step-down two-phase buck converter for VRM , 2005, 2005 European Conference on Power Electronics and Applications.

[3]  K. Harada,et al.  A Novel Three-Phase Buck Converter with Bootstrap Driver Circuit , 2007, 2007 IEEE Power Electronics Specialists Conference.