In-situ observation of tensile deformation and retained austenite transformation behaviors in carbide-free bainitic steel

[1]  Hao Chen,et al.  Revealing the role of dislocations on the stability of retained austenite in a tempered bainite , 2019, Scripta Materialia.

[2]  Fucheng Zhang,et al.  Study on quasi-in-situ tensile deformation behavior in medium-carbon carbide-free bainitic steel , 2019, Materials Science and Engineering: A.

[3]  S. K. Makineni,et al.  Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications , 2019, Materials Science and Engineering: A.

[4]  B. Prakash,et al.  The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels , 2019, Wear.

[5]  Wei Li,et al.  The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels , 2019, Wear.

[6]  M. Herbig,et al.  In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation , 2019, Materials Science and Engineering: A.

[7]  Sarman Singh,et al.  Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation , 2019, Materials Science and Engineering: A.

[8]  Fucheng Zhang,et al.  Inconsistent effects of austempering time within transformation stasis on monotonic and cyclic deformation behaviors of an ultrahigh silicon carbide-free nanobainite steel , 2019, Materials Science and Engineering: A.

[9]  H. Bhadeshia,et al.  Tensile behaviour of thermally-stable nanocrystalline bainitic-steels , 2019, Materials Science and Engineering: A.

[10]  M. Kunert,et al.  Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite , 2019, Wear.

[11]  Fucheng Zhang,et al.  Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel , 2019, Materials Science and Engineering: A.

[12]  H.-D. Wu,et al.  Incomplete bainite transformation in Fe-Si-C alloys , 2017 .

[13]  K. Findley,et al.  Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering , 2017 .

[14]  D. Daisenberger,et al.  Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel , 2017 .

[15]  J. Sietsma,et al.  Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel , 2016 .

[16]  Kyung Il Kim,et al.  Control of retained austenite morphology through double bainitic transformation , 2016 .

[17]  G. Voort.  Encyclopedia of Iron, Steel, and Their Alloys , 2016 .

[18]  T. Wang,et al.  Characterisation of microstructure and mechanical properties in two different nanostructured bainitic steels , 2015 .

[19]  Mark D. Taylor,et al.  Determination of carbon distributions in quenched and partitioned microstructures using nanoscale secondary ion mass spectroscopy , 2015 .

[20]  L. Kestens,et al.  Factors influencing the austenite stability during tensile testing of Quenching and Partitioning steel determined via in-situ electron backscatter diffraction , 2015 .

[21]  J. Jonas,et al.  Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension , 2014 .

[22]  Eric J. Mittemeijer,et al.  Fundamentals of Materials Science: The Microstructure–Property Relationship Using Metals as Model Systems , 2014 .

[23]  Z. Fucheng,et al.  Low-temperature bainite in low-carbon steel , 2014 .

[24]  S. Babu,et al.  Microstructure evolution during tensile deformation of a nanostructured bainitic steel , 2013 .

[25]  Shu Yan Zhang,et al.  Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel , 2013 .

[26]  Z. Fucheng,et al.  A novel bainitic steel comparable to maraging steel in mechanical properties , 2013 .

[27]  Kebing Zhang,et al.  A new effect of retained austenite on ductility enhancement in high strength bainitic steel , 2012 .

[28]  T. Sourmail,et al.  Tensile behaviour of a nanocrystalline bainitic steel containing 3 wt% silicon , 2012 .

[29]  G. Miyamoto,et al.  Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel , 2012 .

[30]  Jonathan P. Wright,et al.  High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels , 2012 .

[31]  G. Miyamoto,et al.  Reconstruction of Parent Austenite Grain Structure Based on Crystal Orientation Map of Bainite with and without Ausforming , 2011 .

[32]  Y. Adachi,et al.  Effect of ausforming on nanobainite steel , 2010 .

[33]  D. Suh,et al.  Strain partitioning and mechanical stability of retained austenite , 2010 .

[34]  D Lawrence,et al.  In situ site-specific specimen preparation for atom probe tomography. , 2007, Ultramicroscopy.

[35]  Z. Fucheng,et al.  Microstructures and mechanical properties of 60Si2CrVA steel by isothermal transformation at low temperature , 2006 .

[36]  Francisca García Caballero,et al.  Ultra-high-strength Bainitic Steels , 2005 .

[37]  He Xinlai.  ABNORMALLY TURNING OF FINE LATH-LIKE MICROSTRUCTURES IN LOW CARBON MICROALLOYED STEEL DURING MONO-AXIS TENSION , 2003 .

[38]  H. Bhadeshia,et al.  TRIP-Assisted Steels? , 2002 .

[39]  H. Bhadeshia,et al.  Bainite in Steels , 2019 .