Welding of transparent polymers using femtosecond laser

Based on nonlinear absorption, we report on laser welding of cycloolefin copolymers without any additional absorption layer employing infrared femtosecond laser. To the best of our knowledge, this is the first report of ultrashort laser welding of this material class, revealing a remarkable high processing speed of 20 mm/s in a single pass mode. Using a 1028 nm laser having a pulse duration of 220 fs at a repetition rate of 571 kHz leads to a welding seam width between 38 and 137 μm, depending on the applied laser average power. The welded joint is characterized by a maximum shear strength of 40 MPa. The experimental results are compared to those reported for femtosecond laser welding of PMMA and to those published for using a Thulium fiber laser.

[1]  Koji Sugioka,et al.  Fabrication of 3D microfluidic structures inside glass by femtosecond laser micromachining , 2014 .

[2]  Pedro S. Nunes,et al.  Cyclic olefin polymers: emerging materials for lab-on-a-chip applications , 2010 .

[3]  D. Hand,et al.  Avoiding the requirement for pre-existing optical contact during picosecond laser glass-to-glass welding: erratum. , 2015, Optics express.

[4]  J. Nishii,et al.  Welding of Transparent Materials Using Femtosecond Laser Pulses , 2005 .

[5]  Bernhard Schmauss,et al.  Fabrication and characterization of planar Bragg gratings in TOPAS polymer substrates , 2015 .

[6]  S. Nikumb,et al.  Precision glass machining, drilling and profile cutting by short pulse lasers , 2005 .

[7]  W. Pfleging,et al.  Laser patterning and welding of transparent polymers for microfluidic device fabrication , 2006, SPIE LASE.

[8]  Frantisek Svec,et al.  Room-temperature bonding for plastic high-pressure microfluidic chips. , 2007, Analytical chemistry.

[9]  J. Nishii,et al.  Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses , 2006 .

[10]  Boris N. Chichkov,et al.  Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels , 2011 .

[11]  A. Kristensen,et al.  Optofluidic dye laser in a foil. , 2010, Optics express.

[12]  Lan Jiang,et al.  Mechanism and elimination of bending effect in femtosecond laser deep-hole drilling. , 2015, Optics Express.

[13]  Caterina Gaudiuso,et al.  Welding of PMMA by a femtosecond fiber laser. , 2015, Optics express.

[14]  M. Richardson,et al.  Welding of polymers using a 2 μm thulium fiber laser , 2012 .

[15]  Changhai Wang,et al.  A laser microwelding method for assembly of polymer based microfluidic devices , 2015 .

[16]  Jin-Woo Choi,et al.  Disposable smart lab on a chip for point-of-care clinical diagnostics , 2004, Proceedings of the IEEE.