Gyroscope integrated environmental mode compliance control for biped robot
暂无分享,去创建一个
[1] M. Vukobratovic,et al. On the stability of anthropomorphic systems , 1972 .
[2] Kouhei Ohnishi,et al. Motion control for advanced mechatronics , 1996 .
[3] Masayuki Inaba,et al. Online generation of humanoid walking motion based on a fast generation method of motion pattern that follows desired ZMP , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.
[4] K. Ohnishi,et al. ZMP disturbance observer for walking stabilization of biped robot , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.
[5] Marc H. Railbert. Legged robots , 1991 .
[6] S. Nakaura,et al. Balance control analysis of humanoid robot based on ZMP feedback control , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.
[7] Toshiyuki Murakami,et al. Variable Compliance Control for 3 Dimensional Biped Robot considering Environmental Fluctuations , 1999 .
[8] K. Ohnishi,et al. Foot Pressure Control Based on Extraction of Environment Mode , 2006, 2006 IEEE International Conference on Industrial Technology.
[9] Kouhei Ohnishi,et al. ZMP Reference Trajectory Generation for Biped Robot with Inverted Pendulum Model by Using Virtual Supporting Point , 2008 .
[10] Marc H. Raibert,et al. Legged robots , 1986, CACM.
[11] Atsuo Takanishi,et al. Biped landing pattern modification method with nonlinear compliance control , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..
[12] Satoshi Kagami,et al. Robust Walking Control of Humanoids on Unknown Rough Terrain via Short Cycle Motion Generation Using Absolute Position Estimates , 2011 .
[13] Kouhei Ohnishi,et al. A Walking Stabilization Method Based on Environmental Modes on Each Foot for Biped Robot , 2009, IEEE Transactions on Industrial Electronics.
[14] Rodney A. Brooks,et al. Humanoid robots , 2002, CACM.
[15] Satoshi Kagami,et al. Online Walking Control System for Humanoids with Short Cycle Pattern Generation , 2009, Int. J. Robotics Res..